• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back as they please without you having to let them in or out. They can also help prevent your cat from toileting inside the house.

Installing a cat flap on the door panel made of upvc is a lot easier than glass doors, however it requires some knowledge and the proper tools.

Take a measurement of the door

Fitting a cat door cat Flap in upvc door panel in a front door could be difficult, but so long as the cat flap is the appropriate one and you follow the instructions it shouldn't be too difficult. We will be showing how much to install a cat flap to trace the shape, then use an jigsaw for cutting out the area in the door and then finish off the job by attaching the flap to the door. This will ensure the flap is in place and protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap that you need, measure the width of your pet. This will ensure that the flap is large enough that your pet can leave and enter the home without needing to open and close the door each time, yet small enough to prevent the pet from straying too far in either direction.

If your kit has a drawing showing where to drill, then stick it on the door and then use a pencil around it. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and these elements.

Put on your eye protection and dust mask. Then using a jigsaw start to cut according to the lines you've drawn in, but don't push the blade too hard as this will cause it to cut more quickly than you want it to. If you have an already-cut square, use it to ensure that you're cutting properly and to make sure the hole is a proper rectangular shape. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap in upvc door panel flap is a great method to allow your pet to go out and in without worrying about them coming in with visitors or leaving unwelcome gifts in the house. It also stops draughts and keeps your home's temperature steady. However, installing the cat flap to your door can seem like an intimidating task for those who have never done it before, which is why many people to seek out a professional joiner or carpenter to complete the task. This is a viable option, however you can do it yourself if the tools are right and the instructions are adhered to.

While this is far easier to do when using a timber door it is still possible to do this in uPVC doors, though you need to be very careful not to scratch the doors, as this can end your warranty. The first step in the process is to take measurements of the door, making sure that it will fit the new cat flap. If you have a standard uPVC panel it's easy. However when your door is composite or another type of door, you might need to be more careful.

Next, you will need to determine the belly height of your cat. This is the distance from the floor to the underside of the cat's stomach, and you will need to find a place on the door where this measurement is within the range your cat can comfortably pass through. Once you know this then you have to draw the area with a pencil and a spirit level to be sure that the hole you will make will be a good fit for your cat flap in upvc door cost.

Once you've marked the area, Cat flap in Upvc door panel it's time to cut the hole. You will require a jigsaw and it is crucial to be patient to ensure that the cuts are clean and smooth rather than uneven and rough, as it could cause damage to your door. It is also important to wear safety glasses and a dust mask whenever using the jigsaw, as dust from the saw can be dangerous to your health. After you've completed the cutting, you will have to smooth out the edges of the hole with sandpaper, so that your cat flap can be fitted easily.

Cut a Hole

It can be difficult to install a cat flap into the door panel or double glazing unit. It is tempting to tackle the task yourself, but unless have a lot of experience in DIY it is recommended to hire a professional to do the job for you. A faulty job can not only look ugly and unattractive, but could also be an security risk. It could allow cold air to enter when the cat is outdoors and hot air out when the cat is inside.

The first thing to do is mark the location of the hole in the door using pencil and an ax level. This will ensure that it is located and is parallel to other parts of the door. Make sure to have sandpaper on hand to smooth out any rough edges.

Wear the safety equipment you need to work with an electric tool. If you are concerned about the noise of the jigsaw, consider buying an electric version that is quieter and simpler to use.

It is essential to only remove the material required to make the cat flap. It is essential to leave a bit of material to cover the wall of the flap. However cutting off too much material can cause issues or even damage the door frame.

If the door is made of upvc and features a metal panel or frame, it may interfere with the microchip flap. In this case you'll need create an over-sized hole to ensure that the metal doesn't get in contact with the walls of the flap.

If you're looking to install a cat flap inside a double-glazed or upvc window with frames made of metal you'll need to talk to an expert. They can provide you with a brand new piece of glass with the hole already made for the cat flap. It is cheaper to have this done instead of trying to install a cat flap into an existing glass pane that was not designed specifically for the purpose.

Install the Flap

Cat flaps allow your pet to come and go at their own pace, giving them the ability to unwind inside the house when they want to. If you've got an replacement upvc door panel with cat flap door, it might be difficult to fit a cat flap, especially in the absence of a glass pane that can be cut to fit one. Luckily, if you're happy to purchase and install a new half-glazed uPVC panel, then it's possible to fit the cat flap to these doors. It's not a matter of drilling a hole into the door. You'll also have to perform a few steps to ensure that the door is secure.

A composite, uPVC, or GRP door panel usually has an flimsy plastic outer layer that is bonded to a soft, polystyrene core that is insulating. The material is extremely fragile and care should be taken when cutting through it to avoid damaging. This kind of door typically includes a template that you can use as a guide for cutting the hole in the door.

Once you've determined the position of the hole in your door, now it's time to fit the cat flap itself. You can pick from a range of options, from simple push-button units to ones that are microchip-activated and allow only your pet to enter. No matter which type of cat flaps you choose it's essential that your cat is able to use the flap comfortably without getting stuck outside in the rain.

It is a good idea to choose circular fittings rather than a square one, as circles are more securely cut into the door glass. This is because square holes make the glass more susceptible to cracking when drills are used on it. This is also a safer option because you won't need to drill into the toughened glass that could break and hurt your pet or family. This is particularly important if you have a child or an elderly person living in your home who could be injured by shards glass.