• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Cars

A ghost immobiliser car is an advanced security device that protects your vehicle from key cloning and hacking. It is undetectable and leaves no marks behind after installation, which makes it a popular choice for owners of rare or expensive vehicles.

It makes use of buttons on your steering wheel, centre console, and door panels to generate a unique pin code sequence (up to 20 characters) that must be entered before the engine can begin.

There aren't any keyfobs or LEDs or ghost immobiliser car other indicators to assist you in finding it.

A ghost immobiliser guards your vehicle from hacking and key cloning. It is a discreet electronic device that is connected to your vehicle's data network and intercepts signals from the engine control unit (ECU). The system stops your car's engine from starting until you enter a specific PIN code. It makes sure that thieves don't get away with your joy and pride.

The device is linked into the CAN bus in your vehicle which allows it to read data between the ECU and the other connected components in the car. Installation is a highly-specialized procedure and requires an approved installer. After installation the device will be hidden in your car which makes it unnoticeable to thieves. In addition to being able to prevent engine start, it will also detect vibrations and movement of the components within the vehicle.

If a criminal attempts to disable the device, it will cause the lights for the engine management to flash rapidly, and the horn will honk. This will alert the driver that there is an issue with the engine. They may panic and then abandon their vehicle. This will give you an advantage over a standard immobiliser as the car's owner will be aware that their vehicle is in trouble and can contact the authorities immediately.

The device can be deactivated by an application that can be accessed both by the owner and installer (even even though the majority of people will not forget their PIN code). Certain systems come with a service/valet feature that temporarily disables the immobiliser and allow the driver who is trusted to drive the vehicle without the need for PIN. The system will activate when the vehicle has surpassed 31 mph, and driven for a certain period of time.

No Bluetooth or wireless connectivity

This means that it is not detected by the modern thieves who use diagnostics to find an unconnected circuit or hidden immobiliser. It is undetectable as it does not make use of radio signals. This makes it an effective deterrent to vehicle theft. The GHOST also comes with options for specific vehicle features like gearbox locks (to prevent the engine from starting while in a gear) & anti-hijack that we can activate after installation.

Our certified installers can install the ghost immobiliser birmingham to a variety of vehicles. It is fully compatible with all Mercedes vehicles. In contrast to other products on the market it is the only one that works. GHOST is compatible with the existing interfaces in your vehicle, such as buttons on your steering wheel and driver's side door cards or centre console. This makes it an immobiliser that is 21st century that works independently of the factory-installed alarm or tracker. It does not display any sign of its existence when fitted into your vehicle, hence its name.

The Ghost can be deactivated by pressing a secret sequence of buttons using the driver's smartphone application. This is possible from anywhere in the world, and is easy & hassle free. You can alter it as many times as desired and only the app's owner will be able to see the changes.

It is also possible to disable the GHOST from the satnav in your vehicle by entering a different sequence, making it more secure as a deterrent against thieves. In fact, this method is so efficient that the Bentley Bentayga worth PS200k was recently stolen at a set of lights while it was stationary, and the driver entered in their PIN to disable the device.

No annual fees

While traditional immobilisers prevent vehicles from starting if they don't have the right key fob, Ghost goes a step further and thwarts a variety of methods used by thieves to steal vehicles. For instance, it can detect signals jamming, device spoofing and other techniques that make stealing your car more difficult. The device also requires an additional, unique pin number or code sequence to start the engine. This discourages thieves and encourages your car to be left alone.

This makes it a valuable tool for high-end cars which are more susceptible of being stolen. This means you can enjoy greater security and protect the value for resale of your vehicle. In addition installing the Ghost Immobiliser can even lower your insurance costs for your car. While the device is pricier than conventional immobilisers but the security it offers is worth the cost.

Unlike other devices, Ghost doesn't require an annual subscription. Instead it connects to your mobile via low-energy bluetooth. This creates a secure encrypted connection between the immobiliser and your phone, making it virtually impossible for hackers or criminals to intercept. There are no indicators in LEDs to reveal the whereabouts of the device.

The Autowatch ghost 11 immobiliser car immobiliser is easy to install and take off. The service valet mode allows you to turn off the car immobiliser while you take your vehicle for service or tested. When you return, just enter the PIN code to allow your vehicle to start up again.

The Autowatch Ghost can also be used with newer cars which do not have an immobiliser in the factory. It can be used to transfer between vehicles if you sell your previous one, as long as the new car is compatible.

No need to memorise PIN codes

A ghost immobiliser car is an extra layer of security that prevents tech-savvy thieves from starting your vehicle, even if they've cloned the key fob of yours or stolen it. It is connected to your vehicle's Control Area Network (CAN) and disables the motor [Redirect Only] if you start the engine without entering a PIN code. It doesn't require a new keypad instead, it utilizes buttons in your vehicle, like the steering wheels and door panels as well as the centre console. This means that it's not only inaccessible to thieves, but it also keeps the appearance of your car's interior.

The Autowatch Ghost 2 immobiliser is an electronic device that integrates with your car's ECU to create an impossible barrier for thieves to break through. It operates in a quiet manner and doesn't emit radio signals, making it completely inaccessible to the traditional RF scanning technology that thieves use to steal the signal from your key fob and clone it. It's a TASSA verified product, which means that it has been tested independently to the highest standards and is acknowledged by some insurance companies as a valuable accessory to the security of your vehicle.

You can switch the ghost CAN immobiliser to "Service/Valet Mode" if you need to give your vehicle away for service, valet park or a friend drive it for you. You can switch this mode using a unique pin code that is only known to you, and it can be changed at any time.

The manual that was included with your ghost immobiliser for sale will assist you with this simple and quick procedure. It will explain how to enter the code and how to reset it if you forget.

Simple to reset

Since its introduction the ghost immobiliser vehicle has been a dominant factor in the security of vehicles. Through the use of undetectable positioning, communication with CANBus to ECU technology and a unique pin code entry, it's managed to remain one step ahead of the most determined thieves. It doesn't require a key fob, or any other wireless connection to work. It is also able to be removed from your vehicle in the event that you decide to sell it.

As with any other security measure or password it's inevitable that you'll forget the PIN number for your ghost immobiliser. If this does occur it's not necessary to fret because it's simple to reset. All you need to do is contact the person who installed your system and they'll be able to provide you with an emergency code. It's usually hidden under a scratch-off area on a card supplied at the time of installation. it's essential to keep it in a safe location.

The Emergency Code will allow you to regain access to your vehicle so that it can drive it as usual and is a great option in situations where you need to hand your car over for service or valet parking for instance. It can also be used to ensure that your car is safe when you are away from it, so that nobody other person can start the engine.

If you are looking to increase your security and protect your vehicle from cloning, hacking and remote theft, then think about installing a ghost immobiliser from Autowatch an industry leader in the UK market. To find out more contact Autowatch today.