• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the cloth rather than on the floor where they could be trodden under and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might want to consider using a security door repairing that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time they are susceptible to a range of problems including sliding. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows so you can reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws until they stay in the right place.

If you are unable to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen. Often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to repair the loose uPVC emergency window repair handle yourself. The first step is to close your window and do an experiment fit. The corner joints of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window sash repairs.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass window repair seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It's easy to replace a hinge on a window however it is easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to inadequate installation at the factory. Sending us a picture via our website will often solve the issue. We are more than happy to give advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This causes gaps to develop where the sash window repair meets the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can also be misaligned, and again it is feasible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

One of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.