• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers that will help the new pane to fit properly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your home until a professional comes out to repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems, including sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. The first step is to close the window and perform a test fit. The corners of the sash must align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may require removal before a fresh layer can be put on. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily corrected by an upvc window repair near me window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change the hinges on a window repair, but it's easier if someone helps you hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also because of wear and tear, can become misaligned, this can cause gaps to develop where the sash joins the frame. If they are beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it's possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows eventually get worn out and it may be more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc window repair windows, it is recommended to seek help from a professional as soon as you can.