• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your valuable item from theft. It's discreet and does not require additional key fobs to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique, changeable pin code sequence up to 20 presses long. This will then allow your vehicle to begin.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of security products that are available including tracking systems, immobilisers and alarms. However, not all of these are equally effective in protecting your car. A tracking device can assist you in locating your vehicle in the event of it being stolen, but it will not prevent the crime. Immobilisers, however perform exactly as they state on the tin - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your vehicle.

Utilizing the buttons already in your car The ghost 2 immobiliser fitting near me device is able to create an exclusive sequence that has to be entered before the engine can start. This can be accomplished by using the heater, window or indicator stalk buttons. Additionally, there is also an app on mobile that can function as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is an excellent option for those who want to offer your car to valet parking or maintenance. The immobiliser will stay in operation.

The Ghost is a very unique and innovative device which works in conjunction with buttons on your vehicle rather than being a standalone unit. This means that it is not just a highly effective protection against theft of your vehicle, but can also be transferred over to any future cars you own, making it more of an investment than traditional steering wheel locks.

Weatherproof tiny device

The autowatch ghost installation walsall (responsible-elk-fhdt0c.mystrikingly.com) Ghost Immobiliser is a high-tech security system that protects your pride & joy from key cloning and hacking. It also stops ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common technique that car thieves use to bypass immobilisers.

The benefit of using CAN data is that it operates in a silent manner compared to traditional systems. It isn't detected by sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique disarming sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app is limited to one connection, and comes with the ford fiesta ghost installer's unique pairing code. the Ghost. All communication between the two devices is secured.

The bmw m2 ghost installer also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. The engine can only be started if a valid PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to hand your car over to a valet service or to be serviced without needing to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects signals to prevent your car from starting up normally until you enter a custom code. The system can be activated or deactivated by using your smartphone's application without the need for wires.

Standard factory immobilisers for vehicles work by having a transponder inside the key, which sends an electronic signal to the ECU. The car will start if the correct code is transmitted. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It shields you from key cloning or hacking, and even key theft. The only way thieves could steal your car is physically towing it away and even then they would not be allowed to drive it.

Ghost makes use of buttons on your vehicle, including the indicator stalk, steering wheel, and door panels, to generate an individual PIN code that must be entered in order to use your vehicle. This is done without the need for additional hardware like a key-fob and can be as long as 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanning or code grabbing techniques to detect that security systems have been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can't be disabled or removed by thieves. It's more difficult to remove than a car alarm that requires disarming using an action sequence. This makes it a perfect complement to a GPS tracker, which can help locate your vehicle after it has been stolen.

Emergency PIN code override

You do not have to look long on social media sites to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original key fobs.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to prevent your vehicle from being stolen if it is targeted by thieves. It creates a unique pin code by pressing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code is entered in conjunction with your original key fob in order to prevent the engine from starting. The unique PIN for override is on the black card you will receive after installation. It's easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, so it isn't able to be identified by modern criminals using diagnostic software that can identify the security system you have installed. This makes it a great alternative to the tracker.

Unlike other security systems, that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems, but this has to be specified before installing the device. They are also fully service/valet-mode compatible and a good alternative to a tracker if you are you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent times there has been an increase in the number of vehicles being stolen with no owner's keys. With the ease of access to key cloning tools and door lock pick sets it is now much easier for thieves to steal your joy and pride. To combat this we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your car has been hijacked.

It communicates directly to your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't use radio frequency or key fobs. This means it cannot be detected by diagnostics or other car hacking devices. It also prevents the addition of an additional key or replacing the ECU to bypass the system since only the correct PIN code will allow the engine to start.

The device is hidden inside your car using existing buttons on the steering wheel, the centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits has to be entered before you are able to start your vehicle.

This is the first aftermarket CAN-bus immobiliser that was created. It can prevent your vehicle from being driven or even started if you don't enter a PIN code first. If you're driving away with the device armed the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate as normal. If you don't enter your PIN code at this point, the warning will continue to flash and require a new PIN code for every attempt to start your vehicle.