• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

patio door repair Doors Repair - How to Fix a Wet Dog and Save Your Dog From Cold, Wet Feet

Patio doors can provide a convenient and comfortable transition between your indoor and outdoor space. By keeping the air inside your home, they can save you cash on cooling or heating bills.

But over time your sliding glass or French doors can lose their appeal. Fortunately, simple fixes can keep them looking and operating as new.

Weatherstripping

It's 5 am and you're letting your dog out for his morning routine when you stumble into an emerald-colored pool of water right near the sliding patio doors. You look around and see that the rain from last night blew in through the seals on your patio doors. Buckle up it's not going to be a five-minute project. With a bit of patience and a few tools to fix the issue, you'll be able to do it and protect your dog from cold, wet feet as well.

The most important thing is to replace the weatherstripping, which seals the gap between the door and jamb, preventing drafts, pests and moisture. This will also keep your energy costs down. A quick inspection of your windows or doors will let you know whether the weatherstripping in good condition or requires replacing.

There are a variety of weatherstripping to choose from such as open-cell and felt foam, vinyl and thermoplastic rubber, as well as metals like bronze or copper. Each has its pros and drawbacks. Foam with open cells and felt are cheap however they can be ineffective and noticeable at blocking airflow. Vinyl is more expensive however, it is durable and resists moisture. Rubber is an excellent option for areas that have heavy traffic since it will not wear out as fast.

To install new weatherstripping, first remove the patio door from the frame by loosening the screws that adjust the rollers using a screwdriver. Then using a flathead screwdriver unscrew the plugs that hold the weatherstripping in place at the bottom of the frame. Remove the weatherstripping you have previously removed from the frame, and then remove any adhesive remnants. Then, cut the replacement to the correct length, peel back the plastic strip on the other side and attach it to the jamb with a putty knife.

After that, you can reinstall the door and adjust the roller screws to ensure that the door is positioned in the track and closes properly. Then, apply waterproof caulk on the area where the stationary panel is positioned to bypass the sliding door and where the edge of the stationary panel reaches the frame. This is a less-reliable seal than the weatherstripping however, it should last for a time.

Locks tilt and slide patio door repairs near me Handles

Patio door handles and locks are important for the security of your home. Over time they can get worn or damaged and need to be replaced. The spindle connecting the interior handles and the exterior handles may also require replacement.

To replace a handle for a patio door, first remove the old one by unscrewing any screws that hold it in place. After you have removed the old handle, use a level and ensure that the patio door is straight. If the door isn't straight it could cause problems with the lock and cause issues in the future.

Close and open the handle several times after installation to make sure it's working correctly. If you have any issues, check the manufacturer's instructions or a specialist in hardware for assistance. To avoid problems in the future it is recommended also to lubricate your lock mechanism using lubricant made of silicone.

The most popular type of patio door lock is a mortise lock. It's usually constructed of steel and is placed in a pocket cut into the door frame. They are usually used on sliding wood and aluminum doors. Before ordering a replacement mortise lock, it is essential to take some measurements. The measurements you need to take include the location of the mounting holes and the location of the keyway in the lock.

Some patio door handles have an integrated locking mechanism that's integrated into the handle. The handles are rectangular key cylinder that can be fitted into the handle's keyway. This kind of patio door has both the exterior and inside locks in one unit. This type of patio doors is often found on sliding aluminum doors.

If your patio door repairs door latch isn't staying fixed, it could be because the lock tongue isn't grasping the jamb's hasp correctly. Another possibility is that your sliding door isn't parallel to the jamb on the side. Try opening the door up to 1 inch and then spotting it against the frame to see whether there is any gap between the door and the jamb. If there is a gap, you can adjust the rollers at the bottom left or the right of the patio until it is perfectly parallel to the jamb.

Misalignment

In time the tracks and rollers of the door could lose their alignment. This could cause the doors to become stuck or difficult to move. This can also let drafts and cold air into your home, which reduces the efficiency of your energy. Fortunately, misalignment is simple to correct and avoid. Applying a silicone-based grease to the rollers and tracks can help your doors move again. It is a good idea to do this periodically to ensure your doors are in good working order.

Another common issue with patio doors is a damaged screen, which could be a nuisance or even a safety hazard. It may also hinder the doors from closing and opening properly, causing energy loss. In some instances, the screen can be repaired, but in other cases the door must be replaced. If you've got a damaged window screen, make sure to clean it thoroughly. Don't also turn the handles of the door the wrong way.

Over time, hinges may loosen due to normal wear and tear or heavy usage. This can be corrected by regularly tightening screws. It's a simple job you can tackle on your own. If you're not sure, it is best to seek out a professional.

You should also clean the rollers and tracks of your patio doors on a regular basis. Simple brushing or vacuuming will remove dust and debris which could interfere with the smooth operation of your patio doors. You can utilize a special tool to remove tough dirt or corrosion. It is possible to fix the misalignment by tightening or checking the screws. However, sometimes it is necessary to replace the hinges to ensure a long-lasting seal.

If your patio doors' frames are warped or sagging they could affect their alignment and performance. The shifting or warping could be caused by foundation changes but it could also result from poor installation or repeated use. A professional can replace or repair the frame of your patio door, and make sure it is properly aligned. This will allow it perform at its best.

Rollers

Patio doors that slide open are ideal for letting the outside in while letting ample natural light, but they require a bit of maintenance to ensure they slide smoothly. If you find yourself having to pull the handle to get the door to move, or it doesn't move as smoothly as it did in the past, it could be the rollers. As time passes, the lower track can fill with dirt, sand and mud, making it difficult for the rollers to roll across. You can clean it and spray it with a lubricant like 2Slick to see if that helps.

If the tracks are cleaned but the rollers aren't able to move freely it's time to replace the tracks. Replacement rollers are available for your door and track type. You can buy these at most hardware stores, but will need someone to assist you in the removal and Misty install the rollers. Before ordering replacements, get an accurate picture of the roller assembly that is mounted within the door frame so that experts can determine the exact model and type you need. They can also look for specific features like bumps or dimples, cutouts or flared edges to narrow down the alternatives for replacement.

When the rollers are replaced after which you'll have to put the sliding door back into its frame. This is a very heavy door, so you may require assistance. Make sure there are screws securing the track on either side of the frame. If they are check that they're loose enough to allow the door's bottom to slide into the channel above the frame. Remove the screen door from the opening. Make sure it's clear of the track tracks, rollers and track.

After installing the new rollers, gently place the door into the frame. It should be lowered to ensure it is secured. If your rollers are adjustable, you can adjust them to ensure that the door has enough clearance.