• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why Should You Have a Ghost Immobiliser Installed?

Autowatch Ghost is an advanced car immobiliser that shields your vehicle from theft. It works discreetly by connecting to your car's CAN data networks and requiring a unique PIN code that can be changed to be entered for the vehicle to begin.

The system is quiet, has no LED indications, and is not detected by diagnostic tools. It is also TASSA-approved and recognized by a few insurance companies.

No key fobs or LED indicators

A ghost immobiliser is a groundbreaking technology in car security that can stop thieves from driving even if they have access to your vehicle. It connects to the onboard CAN data circuit of your vehicle and communicates with it in a silent manner, so that there aren't any radio signals or key fobs in the process, making it impossible for thieves to get around it. It is also unrecognizable by diagnostics and does not include an LED indicator that would reveal its position. This makes it a great option for expensive or rare vehicles, such as classic automobiles.

autowatch ghost installation Ghost is a tiny device that is hidden within your vehicle's loom, making it almost impossible for thieves to locate it. The device is connected to the ECU to stop theft. It is connected to the CAN (Controller Area Network) system. It is easy to set up and can be completed in less than an hours. It is also a lot less intrusive than other physical anti-theft devices, such as steering wheel locks.

The device is built on the same technology as GPS trackers, however it prevents theft by preventing the vehicle from getting started. It makes use of buttons on your car to create an individual, unique, and changeable PIN that must be entered to drive your vehicle. The device can be programmed to use obscure buttons, like the ones on the back of the rear demister, to make it more difficult for thieves to figure out the PIN. This kind of technology is becoming more and more popular, and a lot of insurance companies are now requiring it for vehicles equipped with keyless entry systems.

The Ghost also prevents hacking and key cloning. The device is connected to the vehicle's CAN bus and utilizes the buttons to generate an individual code that can be altered. The code has to be entered to begin the car. The device cannot be defeated by modifying the ECU or by introducing new key fobs. Instead, the burglar must employ a specific tool to get around the immobiliser.

The cost of the ghost immobiliser is very affordable and can be used in conjunction with a GPS tracker to ensure the safety of your vehicle. It's a great option for older vehicles, and can help you save money on insurance cost. If you're thinking about a ghost immobiliser, contact us at Trackershop for a quote. We will include the installation in the price to ensure that you feel secure about the security of your vehicle.

It is TASSA Approved

If you're trying to secure your vehicle, an immobiliser is the best way to do it. It can shut down features such as the starter motor or the fuel pump in the event that the PIN code was not entered correctly. It is essential to install an immobiliser by an expert. Installers should be TASSA-approved, to ensure that the product is safe to use and functions correctly. The process involves confirming the credentials of the installer, including a criminal record check and a identity check.

The Ghost immobiliser is the newest solution to stop thieves from stealing your car. It connects to the CAN data network in your vehicle and is not required for additional fobs or alarm systems. The system is quiet and cannot be detected either by car trackers or thief. It uses the existing buttons on your steering wheel, door panels and the centre console to generate a unique PIN sequence. It is crucial to enter the correct sequence in order to start your car. This makes it difficult for thieves.

The revolutionary immobiliser is TASSA approved and can be installed by Trackershop which is a company which specializes in the installation of this device. It also offers a variety of other security products for your vehicle, like an anti-theft tracker as well as a remote car starter. The team of technicians is completely mobile, and can install the device at your workplace or at your home.

With more and more cars being stolen with no owner's keys, it's important to ensure your car is secure. Keyless vehicles of today are particularly vulnerable as it is easy to buy cloning equipment and door lock picks on the internet. Autowatch Ghost is an excellent way to prevent this as it cannot be detected by thieves and can't even be picked up by vehicle trackers.

The Ghost II CAN immobiliser is completely hidden, and can't be tampered with by thieves. It can detect attempts to alter the ECU and will shut down certain components of the engine to try to stop it. Additionally, it could even disable the alarm for cars to avoid the attention of thieves and allow them to escape from the vehicle.

It is reversible

The Ghost immobiliser is a completely removable security system that is able to be removed and put in place at anytime. It is linked directly to your vehicle's CAN (Controller Area Network) and protects you with a personalized PIN code that is a private sequence that only you be able to identify. Once the PIN is entered correctly, it will stop the vehicle from starting and prevent thieves from trying to steal your vehicle.

Installation of the Ghost is not going to affect the warranty of your vehicle. The system is compatible with any alarm or tracker you might have installed. It will not leave an imprint on your vehicle's interior or exterior. It's not noticeable to thieves because it does not utilize keys or LED indicators.

Organised car thief gangs are currently using devices to read circuit wires in vehicles, however the ghost immobiliser installers near me Immobiliser does not use any of these methods. Instead, it uses buttons on the dashboard or steering wheel to let you set a unique PIN code sequence. The code must be entered to start the car.

In addition to that, the Ghost Immobiliser can also protect your vehicle from OBD port hacking. This type of theft is becoming more prevalent and is one of the hardest to prevent. The Ghost Immobiliser helps prevent these thefts as it blocks the burglar from connecting a laptop into your vehicle's OBD port and copying keys.

The Ghost can be used conjunction with a vehicle tracker. This can be extremely useful in locating your vehicle after it has been taken. However, it is not recommended to utilize a tracker as the main anti-theft security measure, as they do not stop the theft at all. They are also much easier to locate and remove from a vehicle than the Ghost immobiliser.

It is easy to install

A Ford Focus Ghost Installer immobiliser, a revolutionary technology that is a first, it can help protect your vehicle from theft. It works by connecting to your vehicle's CAN (Controller Area Network) system and generating a unique code sequence that is impossible for thieves to break. It's a cost-effective and highly effective method to keep your car safe from being stolen.

Ghost is designed to be compatible with all vehicles including keys from aftermarket manufacturers. Ghost generates a unique PIN code using the buttons on your central console, dashboard, and steering wheel. This will stop thieves from opening your vehicle. It also has other features, including a GPS tracker to locate your vehicle.

Many drivers pick this type of device because it offers protection against a variety of car theft. It is simple to install, silent and doesn't rely on radio signals. It's also a great option for those who do not want to purchase a full alarm system. It is essential that an expert installs the device to ensure it is working correctly.

It's important that you have an expert install your ghost immobiliser to ensure it functions as it should. A professional will know how to install ghost immobiliser to find the best spot for it, and will also ensure that the device is properly connected to your vehicle's electronic components. The installer will ensure that the device is hidden and cannot be seen by anyone without a reason.

The Autowatch Ghost II CAN Immobiliser can be set to Valet/Service mode which allows your car to be driven at 30mph without having to use the access key. This makes it perfect to valet park or transport your vehicle. It can even be used in this mode if your vehicle is being serviced by a dealer. This mode is easily turned off via the companion app and reset at the end of each use.

The Ghost is the first aftermarket CAN bus immobiliser that doesn't require any wire cutting. It connects directly to the CAN system onboard of your vehicle. It's not able to be detected by diagnostic tools or cloning equipment. It is tamper-proof, silent, and doesn't emit any radio signals. It can be reversible so you can transfer it to another vehicle if needed.