• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

window repair Sash Repairs

Make sure to check the sashes of your windows regularly for any damage, mildew and mold. You can reduce future repair costs by catching problems in the early stages, before they get out of hand.

The sash is an inside frame that is able to move vertically up and down in windows that are open. This article will demonstrate how to do a variety of simple sash repair.

Weather Stripping

Wooden window sashes can add an elegant look to your home. They are also sturdy and can last many years when they are maintained properly. However, they can become damaged or degrade as time passes due to exposure to the elements and wear and tear. Sash repair specialists can restore windows to their original condition and maintain their appearance longer than replacement windows.

Weather stripping is the primary thing to address when repairing windows with sash. It's on both the frame and sash. It could cause drafts if damaged or is loose. To fix it, begin by determining the brand of your window and the date on which the glass was manufactured (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash, and mark its width and height so you can get replacement weather stripping that matches.

Then, remove the sash from its holder and place it on an even surface that allows you to access all four sides. If your sash has a double Glazed window Repairs near me-hung, you'll have to remove the weights and their ropes, which should have fallen into the pocket that was intended to be in the jamb liner. Once you've removed the sash, use a utility knife to cut off the weather stripping that was formerly in place at the corners. Then, remove it manually or using a putty blade.

After the sash is cleaned, you can replace parting stops. These are long pieces that split the sashes. Pam likes to replace them with standard 1/2-inch by 3/4-inch window repair trim from the lumberyard. However, you can also replace them with a piece of scrap wood.

After removing the stopper for the parting and trimming it to length, apply a thin coat of glazing compound to the bottom of the sash. Smooth the compound using your putty tool, and let it dry for at least one day. Once it's fully cured and dried, apply a second coat of acrylic latex paint. This will help protect the putty, and give your sash a modern appearance.

Sash Hardware

The hardware that holds the window sashes may wear out over time and with use. This could result in windows or doors that is difficult to open or close. The good news is that repairing and replacing this hardware is typically quite simple and inexpensive. If a sash is difficult to operate try spraying grease into the jamb channel, and then open it to see if this fixes the problem. If not, the issue is most likely due to the sash balance and you'll have to take off the sash in order to access this hardware.

Ideally, window sashes must swing open and closed without effort, however, this can be difficult when the weights wear out or if the sash that joins rail isn't properly glazed. This problem can be caused by a variety of factors, including insufficient maintenance or the wrong weight rating for the specific sash.

If the hinge arms of a window repair begin to sag, this can cause the sash's to drag and eventually hit the frame in the corner in the opposite direction of the hinge arm (Photo 1). To resolve this issue, first make sure the sash is firmly seated in the opening of the frame and then take it out of the window. If the sash is secured to the hinge arm, you'll have to unscrew the hinge arm and replace it (Photo 2). Install the new sash (Photo 3).

Old windows, particularly those in older homes, can be difficult to open and close because of sagging hinges and an overall inefficiency. Sometimes it is a matter of making a few minor adjustments that can make these windows operate smoothly and help homeowners save money on energy costs.

In order to make these repairs to sash it is essential to have all the necessary tools in place before you begin. Begin by marking the position of the hinge channel on the frame using pencil (Photo 1). This will help you to put the channel in the right location after you've completed. Take the sash off and take out all the hardware including the parting beads cords, chains, and cords that help to hold the sash. Soften any hardened putty using a heat gun set to medium and equipped with an shield to block the nozzle. Remove the old sash and store it in an bag that is labeled.

Sash Weights

Whether your window sash repairs are to replace a broken cord or just to keep your windows functioning, replacing worn out sash weights will improve sash operation and cut down on the energy cost. Sash weights are heavy lead or iron cylinders that are enclosed in a concealed cavity and linked to the moveable the sash with a rope. These weights act as counterbalances, allowing you to open and shut the window without the need for mechanical or electrical devices. When they fail, sashweights are usually left unnoticed or disabled by homeowners.

A weight in a sash that has fallen out of the cavity is difficult to get back and you'll need to find a new one that fits correctly. You will also require a new piece of string, a length sashcord and a few sashpulleys to secure the weights you are replacing to the cord.

Mortise and Tenon joints are used to join old wood windows. The wood pegs that hold the components together can be removed by the use of a pin punch and hammer. Most of them have an enormous diameter on one side and a smaller diameter on the other side, so it is essential to remove the smaller-diameter ones first. Later sashes made use of glue instead of pins. They can be separated by using a knife or a mallet.

After the sash is removed, you can take off the sash stops and gain access to the weight pockets. Usually this is accomplished by drilling a hole near the bottom of each jamb. The hole is then covered with an access panel of wood that can be ripped off to allow you to observe the inner workings of the frame.

After the sash has been stopped and the access panel is removed, you can remove the weight you used and replace it. Weigh the sash first because the weights you have may not be the correct size. After the new weight has been installed, run the string through the sash pulling mechanism. Then, you can attach the string to your boxed frame. Leave a few inches protruding at the head of the string to allow for future adjustments.

Sash Cords

Most double-hung windows of the past come with a chain or cord attached to the weights that helps keep the sashes in balance in the jamb. As time passes, these cords may break, making it impossible to raise the window. A new sash cord can restore the ability to move the sash upwards and downwards and will keep it in its place when opened.

To replace sash cords, the first step is to remove the access panels from the jambs. These are usually screwed or nailed in and need to be removed. You may be able to use a hammer and chisel for removing them however, it is always best to lay down dust sheets prior to starting any work.

Once the access panel is removed, you can begin working on the sash. Use a flat bar or chisel to pry the small parting beads from their grooves. It's important to be patient, as these are often placed in a wedge or nail. If the sash is still in place, pry out the mortise and tenon joints using the help of a hammer and pin or screwdriver, then unhook the wood pegs attached to the components. The sash should move freely now, but it might require some lubrication to feel less stiff.

Take a measurement of the length of sash chain/sash cord required to reach the sash slot at the bottom, and the pulley at the top of the jamb. Cut the cord/chain and then attach it as described in the previous step. You can either use a hammer and screws or nails, however nails are less likely to cause damage.

If you don't have an upgrade kit to replace the old counterbalance system it's best to keep the original balancing weights in place. It's not too expensive to purchase them from a salvage store and they will be easy to install once you've got the sash open. Based on the size of your window, one or two sash weights might be required to keep the sash in an open position.