• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money and make their homes comfortable. Window replacement is often required in the event of serious damage such as broken glass, or a shattered window frame.

Many other issues can be fixed to extend the longevity of windows. The most frequent issues are:

Cracked or Broken Panes

Glass that is cracked can be caused by a lawnmowers that throws rocks at the wrong time or branches of trees being blown by strong winds. It's not just visually bad, but it can also lead to more energy costs because broken glass lets cold air into your home. Luckily, it's usually relatively simple to repair windows with broken panes.

Begin by carefully removing glass repair with gloves and safety sunglasses. You may need to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Next, use a soft cloth or paper towel to wipe the glass's surface and wood of the frame.

Once the area is clean and dry, apply a waterproof silicone caulking around the perimeter of the frame. This helps prevent water from entering through the crack, which can cause further damage to the frame and the glass.

A serious crack in double-paned glass can compromise the gas between the panes, which can make your windows less efficient in insulating. If the crack is serious enough to threaten the quality of the glass or the glass has an inner pane completely missing, it might be the time to call a professional.

Cracks caused by thermal stress can occur when there is a drastic difference in temperature inside and outside your home. The glass is then able to expand and shrink. If this happens on two portions of a window, it's probably best to replace the window instead of trying to repair window it.

For windows repair that have cracked but aren't yet ready to be replaced, clear tape can do a good job of securing the crack and preventing the entry of bugs and cold air. You can also cut an amount of nylon stocking big enough to completely cover the crack, and then attach it using duct tape. It's not an end-to-end solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks on your older windows it is recommended to contact the local company to determine whether replacing the entire window is a better option.

Rotten Wood

Wood rot is a common issue with windows. It can damage a home's appearance and pose a safety hazard. It is, however, possible to repair rotted wood. It is first necessary to address the cause of the wood's rot. Check for roof leaks and other places where water could get into the wood.

The next step is to take out the rotten components of the window frame. This can be done with the claw hammer, chisel or a rasp. Once the rotten areas have been eliminated then you must replace them with new wood. It is recommended to choose treated wood for this task as it is resistant to rot. If you are not able to replace the rotted timber you can apply wood filler and hardener to strengthen the damaged area. Most hardware stores will have this type of product. To get the best results, make sure you follow the directions on the label.

After you have replaced the rotten areas of the windowsill, it is important to protect the repaired area. Apply a water-resistant sealant to the wood. Sikkens for instance, is a great product to use.

Make use of a two-part epoxy to protect the wood against further damage. This product is easy to apply and leaves a beautiful finish. However, it is very important to adhere to the instructions for application on the label. After the epoxy filler has dried, you can smooth the wood's surface. Start with a rough sandpaper then move to more smoother grades.

You don't want to expose the rotted part to more moisture. It is recommended, so, to cover the repaired surface with an oil-based prime that will protect it from water. Then, you can apply the waterproof wood sealant.

The W won't open

There are many reasons why windows won't open. Wood frames can warp in rainy weather, or the house may have settled or someone might have closed it for security reasons. However, with a little patience and the right tools, most windows that are stuck can be opened.

Gunk or debris that has accumulated can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Additionally, hardware made of metal can get rusty when in contact with humidity and direct sunlight. Spray grease on these areas can help prevent oxidation, and repaired help keep your windows operating correctly.

The pulleys used to raise or lower the window can be loosened, or break. These components can lose their tension and get blocked, especially if the window is located two or more stories above the ground.

If you're having trouble opening the window Try using a pry bar to gently force the window to open just a little at one time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the cause of windows that aren't able to lift or lower. You will need to consult your owner's guide for more details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving components on your windows, but they cannot open, it may be time to replace them. Homespire Windows & upvc doors repair provides energy-efficient replacement windows. Don't let the windows in your home become functional to inoperable. A window that isn’t properly shut can leave your home vulnerable for water damage and burglary. Contact us for more information on our windows replacement services and products today!