• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how new your subaru outback replacement key is, you might need to have the key fob programmed by an auto locksmith. This is done by connecting a computer-based programming machine to your vehicle.

To program your Subaru unlock the door to the driver's side using the door button. Then close it. You will hear a chime in the instrument panel and the dome lights will flash.

Step 1: Locate the circuit board on your transmitter

There are several ways to program your key fob. First, you must determine the kind of key fob you own. You can determine this by inspecting the key fob's shape or by listening to the car for a chime.

Once you've got the information, you can begin the process of programming your keyfob home. You'll need a flathead and a metal key to accomplish this. Open the key fob case by twisting it. Insert the key made of metal into the case. Then let go of the battery by pressing the tabs holding it in place. Replace the battery and then put the case back together.

Step 2: Disconnect the key fob case

The battery should be replaced. This is a good idea because it can bring back key fobs that aren't working any more. However, there are some situations in which the buttons inside the key fob could be broken. If you notice the buttons' contacts made of metal have been damaged then you can try applying solder back to them to make them work again.

Make sure you turn off your ignition and close your doors before you begin. You can do this by closing your driver's door and pressing your door button ten times in quick succession. After that, you'll hear the instrument panel chime and your dome lights will blink. This means you're ready to move on.

Step 3: Insert the key fob into the ignition

Many websites will teach you how to program your new or replacement subaru keys Subaru keyfob at home. However, most of them don't offer specific instructions. A professional locksmith or auto dealer in Fort Bliss is the best option to reprogram an electronic car key.

Sit in the driver's seat of your subaru outback key with the engine turned off and the doors closed. Use the door button control and use it to unlock all doors. Open and close the driver’s door a second time. Then, insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will vibrate when the settings are changed.

Step 4 Step 4: Switch on the ignition

Before you begin this process of programming a key fob, it is important to remember that this procedure only works with a functioning key already. If not an auto-locksmith or a dealer will need to program keys for your Subaru Fort Bliss.

Once your key is programmed, you should be able start your car within five minutes. To begin, make sure all doors are closed and the engine is turned off. Next, get in the driver's chair and unlock all doors with the door button control. Insert the key in the ignition and then turn it to the first position. The electrical systems will be activated however, the engine remains in neutral. Repeat this process ten times.

Step 5 Step 5: Unlock the Door of the Driver's Door

Subaru offers many high-end vehicles with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. These gadgets can sometimes stop working.

To resolve this issue to fix it, you must contact a locksmith or the dealer. This will solve the issue and ensure that your vehicle is safe.

First, you must open and close the door on the driver's side. Place the key in ignition and then turn it back to position 1. Then, it should be returned to the off position. Do this as quickly as you can, ten times. After the tenth time, you should hear an audible sound.

Step 6 Step 6: Press the Lock/Unlock buttons on the Driver's Door

If you need to replace the battery on the subaru key car key fob, the process is simple. First, open the exterior fob casing. Then you can use a flathead screwdriver to push open the interior case and take out the old battery.

After you have removed the old battery, replace it with the new one and close the case. Relax in the driver's seat and open all doors using the door button control. Then, put the key in the ignition and turn it to ensure that the electrical systems are powered on, but the engine is off. Repeat this 10 times in a line until you hear a chime sound on the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For some people, the annoying sound that is heard when locking and unlocking a Subaru key fob from outside the vehicle could be distracting. In some instances, the chirp can be disabled by closing and opening all doors and a double-click of the lock button on the key fob.

Switch off the ignition and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime after this is done. The chirp signalizes that the lid of the fuel-filler door are locked. It is possible to alter the setting so that the doors lock automatically without pressing a button.

Step 8 Step 8: Enter the 8 Digit Transmitter Number.

Note down the first series of 8-digits and keep it in a safe place. Then, sit in the driver's seat, close the doors and turn the ignition to the first position. After 10 turns, the instrument panel should sound once.

The circuit board that controls the transmitter is located within the key fob case. There are usually two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. For older models, this process might require a visit to the dealer.