• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Lock Replacement - What You Need to Know

It's a good idea you to change your locks when they start to display signs of being worn out. These signs include things like having trouble turning the lock, or a key that isn't fitting.

It is good to know that installing new door lock hardware is actually very easy. You only need to follow these simple steps.

Deadbolt

The deadbolt is your door's primary defense against forced entry. It is more durable and secure than the latch that activates the lock, therefore you'll want to make sure the deadbolt you purchase is sturdy enough to meet your needs. If you can, choose deadbolts that are made of case hardened steel and has no screw heads exposed on the outside to avoid drilling that isn't authorized. The inside of the deadbolt should also be inserted into the door replacing Upvc door lock frame to improve security.

When you install the deadbolt make sure that your new deadbolt's bolt is extending smoothly into the strike plate once you lock and close the door. If it does not, use a wood chisel to make a mortise for the bolt hole in the strike plate and install the deadbolt. Make sure the latch on the doorknob aligns with the hole in the deadbolt when you close and lock the door, too.

Verify that the new deadbolt matches the old one before installing it. The majority of door locks come with an example of how far the bolt should be above the doorknob. However, it is always recommended to consult an expert in the field for advice if you're not sure what backset measurement you need for your doors. They will be able to direct you to models that are compatible with your doors and existing deadbolt opening.

After you've confirmed that your new bolt assembly is the right length, you can screw it into the hole of the door. If your new deadbolt has a faceplate for the latch, screw it into place as well. It's also a good idea for you to attach the faceplate using the screws recommended to the frame.

Some lock sets come with a decorative or "dummy" bolt that allows you to use the keyed-deadbolt while still having a functional latch. If you're given the option to use a dummy bolt, it should be installed using the same screws used to mount the faceplate of the latch. This will give you the best security.

Some deadbolts come with only a single cylinder accessible from inside with a thumb-turn, while others have a double cylinder that allows both keyed and unkeyed access. Whatever type you select, it's a good idea to buy a commercial-grade lock to ensure the highest security. They are tested to withstand 250,000 cycles of opening and closing before being sold to homeowners.

Latch

The latch is the part that retracts the bolt whenever you shut or open the door. It is typically secured by screws on the side but it could also be attached to the strike plate of the door jamb. When replacing upvc door lock a door lock it is important to make sure you get the correct one that matches the hardware you have. You can either put the latch up against the hardware you have already installed or look up the label on a replacement door locks. Dunn Lumber carries a variety of brands, but it's best to use the identical brand as your current hardware to ensure that you receive a latch that will fit properly.

Certain doors have a hasp instead of latch. A hasp is a strap with a slot it to be able to be inserted over staples. The staple is then attached to the frame of the door or door using nails. When the door is shut the strap pulls back on the staple and locks in the frame. A hasp is usually used in commercial buildings because it is cheaper than deadbolts.

Like all mechanisms with moving parts, locks can wear out from frequent use over time. Sometimes, the internal mechanism may "stick" or be difficult to turn. This may require replacement upvc door locking mechanism of the entire lockset. Other times the exterior handle or doorknob will break, and it is necessary to replace it too.

If your lock is stuck, you can use some graphite inside the keyhole. You can either spray some on the key or rub it onto the interior side of the lock, then move the lock several times to work the graphite into the mechanism. You can also employ a screwdriver for the removal of the knob, which will reveal the inside components and let you see what's happening inside.

After you've removed the knobs, locate the cylinder with two or three setscrews along the edge of the cylinder. Tighten them by turning them clockwise. The faceplate must be removed and replaced. Surface-mounted rimlocks have an additional set of cylinder screws on the back case that must be removed, as well as the faceplate.

Strike Plate

The strike plate is a way to strengthen and upgrade to the locking system. It is affixed to the holes that are used for deadbolts or master key systems bolts. It helps keep intruders out by making sure that the lock's latch is secured in the strike plate when the latch or bolt is engaged. A top-quality strikeplate can enhance the longevity of locks and improve security.

Standard strike plates are flat plates made of metal with a hole or several holes cut into them. It is fastened, usually with screws, onto the frame of a doorway to give the latch a place to sink into when it is closed. It is crucial that the strike plate is properly aligned with the lockset in order to ensure maximum security against break-ins.

If the strike plate of a door is damaged, it should be replaced as soon as possible to ensure that the door will shut and latch properly. To replace a strikeplate, you must first ensure that it is aligned with the bolthole of the doorjamb. A simple way to do this is to lay tape over the bolt hole. Then, test the latch by opening and closing the door. If the latch does not catch then take off the tape. Then chisel the area to make the strike plate level with the doorjamb.

After the area has been chiseled, it is crucial to use a stronger bolt to anchor the strike plate. They should be at least three inches long to ensure that they are securely fixed to a stud in the trim board. If you don't install the longer screws, the wood in the doorjamb could break during a robbery attack by a burglar and make the door vulnerable.

replacing a upvc door lock professional locksmith can quickly replace a damaged or worn out strike plate. They can also install the new strike plate onto a door that has never had one before. They can also upgrade existing strikeplates to increase the security of the building and its appearance. This could assist property owners in attracting tenants who want a secure living space and peace of mind.

Keys

The key cylinder is the part of your lock that accepts a particular key that allows pins to be moved into place so the inner handle can be turned. The key cylinder is the most crucial component of your door lock as it performs the purpose that locks were made for to protect your family, you, and your possessions. It is for this reason that people often have their locks rekeyed rather than replaced.

It is more difficult to replace locks than to change the handle and deadbolt. A complete change in the lock requires removal of the old cylinder as well as hardware from the door (including the handle when you have a knob lock combination) and then installing a new one in its place. There are many DIY-friendly kits that can be used to replace the door lock. However, it is recommended to call a locksmith to ensure the job is done properly.

It is essential to have the right key before you install your new lock and the cylinder. A duplicate key won't work properly and replacing upvc Door lock could cause the lock's failure which makes it impossible for you to open. A professional can prevent this from happening by ensuring that you have a a working, real key for your house.

The next step is to remove the faceplate and the latch plate. You will need an screwdriver to take out the screws which hold them in place. If the new plates will be identical to the previous ones, you might want to secure them to make it easier. If you need to replace them, be careful not to tighten screws too much as this could weaken their grip.

After removing the plates, you will need to determine the measurements for your new locks. It is crucial to know the door's dimensions before you go to the hardware store. Although a lot of locksets available today will fit a standard door thickness, it's better to purchase them ahead of time. It is also important to be aware that doorknob locksets will often be different sizes from deadbolt locksets and that commercial models can come with a slightly larger bolt or latch.