• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Replacing a Window Handle

Changing the handle on your window is an easy project that can be completed in the convenience of your own home. Follow these steps to ensure a smooth and beautiful finish.

Remove the screw covers from your uPVC handle to reveal the screws. Then measure the spindle length to ensure that you receive the right size replacement.

1. Take a measurement of the Spindle Length

It is crucial to have the right size spindle when replacing a window handle. This is because it can affect how tight or loose the handle is, and whether it will lock correctly within the window frame. The spindle is a metallic shaft that connects the handle to the lock on the frame of the window. The spindle is available in either the standard 8mm industry cross-section or older versions that measure 9mm. The current industry standard is 8mm, but this wasn't always the case so when buying a new handle it's essential to check the measurements.

Take the handle off. This is done by turning the handle to the open position, and taking off two screws that secure the handle (which are usually hidden behind plastic caps that must be removed). Once removed measure from the base of the handle until the end of the spindle. This will provide you with the measurements needed to buy a replacement.

There are plenty of choices when it comes to selecting the right window handle from sleek chrome that can fit into modern homes to traditional burnished brass that looks wonderful in restored Georgian rooms or even the more quaint Tudor cottages with curved monkey tail latches! The options are endless but the most important thing to do is select a style that is suitable for your home.

Espag handles are usually installed to uPVC window frames and are always the exact same size with a 43mm central. Cockspur handles for patio doors range between 58mm and 62mm however there are replacements for both sizes. Window handles from Cadenza come in distinct dimensions due to their angle blade that operates the multi-point lock mechanism within the window.

Another aspect to consider when selecting the right window bi-fold doors handle is determining what hand you require, this is simply defined by the hand you use to open the door. Inline espag handles can be used with either left or right-handed windows. Cranked window handles are only used for windows that open in one direction.

2. Take the handle off

A window handle that is sagging can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is, you can repair the uPVC handle by yourself. You'll need only the most basic hand tools and time to complete the task.

The first step is to must open the window and ensure that it is in an unlocked position. The next step is to remove the screw caps that are holding the handle in position. Once these are removed, you can start working on the removal of the handle itself.

The handle is connected to a spindle within the window frame. This is either held in place by either a screw or pin according to the type of handle. The most common handle types of window handles are inline Espagnolette handles and the cockspur handles. Both of these kinds of handles are utilized on casement windows, including windows made of aluminium. They can be locked using keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.

To remove the handle, you will need a flat-bladed screwdriver. After the clip has been released, the handle should slide off the spindle. Once the old handle is removed, you will have to determine the length of the spindle and make sure that the new handle is compatible with this size.

Once you have the correct size, you can put the new handle in the correct position. You will need to make sure that the new handle is securely fixed and is turning the correct way (clockwise for open or counterclockwise for closed). It is essential to ensure that the handle hasn't been placed upside down.

Replace the cap screws. After you have completed this step, you should test your handle to make sure that it's working properly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked position and then back.

3. Take the Screws off

A uPVC window handle is a crucial element of any home and is usually the first thing to exhibit signs of wear and tear or damage. This can be caused by natural elements or by regular use and sometimes even malicious damage caused by opportunistic criminals who may wish to open a locked window and gain entry to your home. But, a simple fix will solve the issue and prevent the issue from happening again.

UPVC handles can also be difficult to remove when the locking mechanisms are not working correctly. Often, the problem can be resolved by replacing the multipoint lock, rather than the entire handle and it's worthwhile to check this out since it can save you money.

After you've removed the old handle, you will need to remove any screws that were holding it in place. These screws are usually located on the inside of the handle base. It could be necessary to use a screwdriver to do this. Be careful not to tighten too much the handle since this could cause it to loosen.

You'll then have to locate the fixing pins or screws that hold the new handle in the correct position. Again these are likely to be located on the inside face of the base of the handle and you will need to use a screwdriver or a pair of pliers in order to remove the screws. If you want to replace them, you can do so by replacing the screw caps and test the handle to ensure it works properly.

Install the handle by adjusting the spindle with the cutout in the window mechanism. Then screw it in. If you're looking to replace the screw covers, make sure the handle is in an open position and any screws are securely secured. It's done! You can enjoy your newly installed window handle. We hope this will allow you to save money on replacement of your double glazed door handle and window in the future. If you'd like more help in this, or any other aspect of your uPVC windows do not hesitate to contact us.

4. Install the New Handle

The procedure of replacing a damaged window handle or updating it is simple and can be completed within only a few simple steps. Identifying the type of window handle, measuring its spindle length and knowing what tools you'll require to finish the job are crucial. Safety is always the primary priority when working with tools and windows. Be sure to follow the steps and ensure that you have the right handle to use.

The first step is to identify the screws holding your existing window handle and remove them, while keeping an appropriate grip on the handle to prevent it from crashing and causing injury. Once the screws have been removed they can be repositioned in a secure location to be replaced later.

Once the old upvc window handles handle is removed, you are now able to begin to install the new one. The handle should be a perfect fit to function properly and keep the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole of the window mechanism, ensuring that it fits securely.

The final step is to replace the screws caps and then test the handle to ensure it is working. If you're not satisfied with the results or if your window doesn't open and close as it should the next step is to contact our experts who will be able to assist.

Almost all homes in the UK have uPVC windows. As so, a large number of them will have to be replaced due to wear or breakage. The process is relatively straightforward and can be done by anyone with some knowledge of DIY. It is important that the handle you choose is in line with the style and size of your window. If you're not sure about the type of handle you require, don't hesitate to get in touch with our team who will be able to help you navigate the various possibilities available.