• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles may seem like an insignificant thing but if you aren't happy with the style or design of them, or are finding them difficult to use then it's time to replace them. With a bit of patience, you can put in an entirely new handle in a short time.

Modern door handles are equipped with cover plates that conceal the screws to give them a beautiful appearance. If your new handle doesn't have screws already attached, you will have to attach them separately.

Removing the Old Handle

Door handles are not only important for their aesthetic value to your home, but they're essential for security as they let you lock and unlock your door. Over time, the external door handles And Locks handle may become loose or feel a bit loose. It could be beginning to appear aged and worn. This is a good indication that it's time to replace the door handle.

One of the first signs that your door handle requires replacing is when it becomes difficult to operate. This is an issue because it means that you are unable to no longer lock or unlock your door which could create a security risk for you and your family.

It is also recommended to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle could be quite dangerous, especially in the event that your children or senior family members struggle to open it and end up trapped inside. It's easy to fix a damaged handle on a door.

Modern door handles are usually standard sizes and should be able to fit any door. If you're not sure if your new door handle will work, take out the old one and measure its housing holes. This will let you buy the right size door handle.

The easiest way to take off your old door handle is to unscrew it from the door itself. This is usually done using a screw driver. Some door handles have a cover plate which hides the mounting screws. It is necessary to remove it to get to the screws. After you've removed the old handle, take note of the way the spindle is attached so that you can be sure to align it when you install the new one.

You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver for removing the door handle. However, Euro door handles you'll have to locate the tiny latch which is located on the edge cut piece. After you have removed the latch, take off the handle and the strike plate. Then, you can remove the latch from the door's edge.

Remove the Strike Plate

When you replace your handle, you'll want to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the above diagram which illustrates the components of the door handle). If your current latch plate has rectangular, swap it out for the round one so that the latch is able to hook into the strike plate in a manner that makes the handle more comfortable to operate.

The first step is to remove the screw that is holding the latch plate. These screws are often tight and will require some force to loosen. If possible, it may be beneficial to have a second person assist you with this task.

The latch plate should lift itself out of the door once the screws have been removed. If the latch plate is stuck or refuses to move use a small file to scrape the edges. This will sometimes free the plate up.

Now you can prepare the new strike plate for installation. Attach the latch plate to the bifold door handle replacement jamb using the screws that came with the new handles. Be careful not to over-tighten the screws, as this could cause damage to the strike plate.

If you're unsure whether the latch plate is in the right position You can try closing and then opening the door to determine whether it locks and closes correctly. If not, you'll need to adjust the strike plate upwards or down, or move it forward or back until the door shuts and latches properly.

If the door still moves or jiggles, you may need to increase the size of your latch hole on the strike plate. This is more frequent on older doors. It could be caused by wear and tear hinges that are too small, a wrong size latch, or a damaged strike plate. If this is the situation, follow the same procedure for adjusting the strike plate, but with the use of a metal file instead an hammer and chisel.

Removing the Latch

The latch is the metal piece that is angled that moves through the hole in the inner edge of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also catches a hole on the door frame so that the door remains closed. If your door shakes when you close it, replacing the latch may be all that's needed to fix it.

The screws that secure the door latch are hard to spot however, you can put a screwdriver in a small hole in the trim plate and pry the latch off. After removing the trim plate, you will be able to pull off the latch as well as the bolts that hold it and the spindle.

If the latch is not easily removed using a paperclip or tool to remove it from the handle mechanism. Place the item into the recessed latch slot and then gently twist or jiggle until you feel that the latch and handle begin to break off. It may take this several times before the latch becomes loose enough to allow it to be pulled out.

After the old latch has been removed and the old latch is removed, you should be able to insert the new latch into the slot without issues. Make sure the latch is correctly positioned in the slot and aligned with the screw chambers, and then use the new screws to attach it to the strike plate and [empty] door frame.

Take note of the backset (the distance between the center of the large hole in the door's front and the edge) before installing the new handle. Also, make sure whether the size of the latch on the new handle is a good match to this measurement.

You'll need a new cylinder for your lock if replacing the latch and handle or your existing one is damaged. If you're not changing window handles locks the new lock will fit into your existing recess and will work with your existing keys. Pick a latch that has rectangular cover plates to match your old handles.

Removal of the Cover Plate

Door handles can start to look worn over time, but if you replace them with a contemporary lever on rose design it's a quick and easy DIY project and decorating idea that can improve the overall appearance of your home. You can purchase complete sets of door handles that come with matching escutcheons and privacy adaptor kits.

The first step to replace the door handle inside is to remove the cover plate or rose, which covers the screws and the mechanism within. Find an opening tab on the plate and make use of a flathead screwdriver to remove it from the knob. It could have an opening on one side or be secured by a pin.

Once the cover plate is removed take the screw that holds the interior handle in place and put it aside. It is also necessary to take out the screws that hold the latch and inner plates and the latch plate, which can be done by loosening them with the help of a Philips screwdriver. Then, remove the inner plates and latch plate from the door and put them aside.

Some doors don't have this gap. If yours does not, you will need to drill a new hole into the door. The procedure for this is the same procedure opening a door using locks, but you'll need to take extra care not to harm the door or frame.

After drilling the holes then you'll need to install new door knob screws. Be sure to purchase the same size as the previous ones, so that you don't end up with a handle that's too tight or loose. Installing a new latch and strike rod is also necessary. These are not included in most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic option if you're in need of a premium interior door handle replacement door handles set. It's factory-fitted and has received hundreds of 5-star reviews. It's a great choice for replacing worn or damaged door handle hardware inside your Chevy HHR.