• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go in and out as they please without you having to let them in or out. They can also help stop your cat from urinating in the house.

Fitting a cat flap in the door panel made of upvc is a lot easier than a glass door, however it does require some skills and the proper tools.

Take a measurement of the door

Fitting a cat flap in the door cat flap in upvc door panel can be a challenge however, as long as you select the right kind of cat flap, take your time and follow the instructions provided it should not prove to be too much trouble. We will show you how to draw the shape using the jigsaw to cut out the door's area. Then we'll complete the job by attaching the flap. This will ensure the flap is in place and protects the doors from damage caused by rain and wind.

To determine the size of the cat flap in bifold doors flap you require, take a measurement of the width of your pet. This will ensure that the flap is large enough to let your pet go inside and out of the house without having to open or close the door each time, but also small enough to stop them from moving too far in either direction.

Once you have the measurements you can determine the area on the door where the template should be placed, usually, this is done using an X, but some kits come with drawings that show the location to drill, if you have one, then attach it to the door and use a pencil to draw around the door. If your door has a sill or moulding at the bottom, make sure you leave plenty of space between your cat and the moulding or sill.

Utilize a set square to ensure that you're cutting correctly and to make sure the hole is a good rectangle shape. When you are satisfied with this, you are able to begin removing the rest of the door material. Utilize a set square to ensure that you're cutting the material in a proper manner and that the cut is a rectangle shape. When you are satisfied with the final result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without worrying about them being a nuisance to visitors or leaving unwanted gifts in the house. It also prevents draughts, and helps keep your home's temperature in check. Fitting a cat flap to your door might seem difficult to those who haven't tried it before. A lot of people will hire a professional joiner or carpenter to do the job. While this is definitely an option, it is possible to complete the task yourself if you own the appropriate tools and follow the instructions with care.

Although this is much easier to do with a timber door, it is still feasible in uPVC doors - although you need to be very cautious not to damage the doors as this will end your warranty. The first step is to examine the door's measurements to ensure it will accommodate the new cat-flap. This should be easy enough for an ordinary uPVC door, however you may need to take extra care if you are using a composite or other type of door since these are more difficult to cut than solid uPVC panels.

Next, you will need to determine the height of your belly for your cat. This is the distance between the floor and the underside of your cat's stomach. You will need to locate a space on the door that allows your cat to comfortably pass through. Once you've got the information, you'll be required to mark the space with a spirit level and a pencil so you know the opening will fit your cat.

Once you've marked the area, it's now time to cut the hole. You will need to use the jigsaw, and it is important that you take your time in order to ensure that the cuts are clean and smooth rather than uneven and rough, since this could damage your door. Wear safety glasses and a dust mask when working with the Jigsaw. Inhaling sawdust is hazardous for your health. After you have finished cutting the hole, you will need sandpaper to smooth the edges so that the cat flap is easily inserted.

Cut a Hole

It isn't easy to put the cat flap onto the door panel or double glazing unit. It is tempting to tackle the task yourself, but unless you have plenty of experience with DIY, it's likely to be best to have a professional in to do the job for you. A mistake could not only be unsightly and unattractive, but could also be an security risk. It could let cold air to enter when the cat is outdoors and hot air to escape when it is inside.

The first thing to do is mark the location of the hole in the door with a pencil and a spirit level. This will ensure that it is properly positioned and that it runs in a straight line with the other parts of the door. It is important to have an sandpaper piece on the ready to smooth any edges.

Wear any safety gear you'll need to use an electric tool. If you are concerned about the sound of the jigsaw, you can purchase an electric version that is quieter and more user-friendly to use.

It is important that you only cut away the material required to make the cat flap. A little bit of extra material will be needed to cover the thickness of the the flap but removing more than this could cause issues and harm the frame of the door.

A door made of upvc may contain a metal frame or a panel inside that could interfere with the microchip cat flap, and in this case you'll need to cut an oversize hole so that the metal doesn't get in contact with the the cat flap, if this is the case, it is crucial to fill in the gap and make it watertight.

If you're planning to install a cat flap in upvc door panel cat flap door panel (Full Survey) flap inside a upvc or double-glazed window cat flap with frames made of metal, you'll need to consult a specialist. They can offer you a brand new piece of glass with the hole already made for the cat flap. It will be much cheaper to do this than to attempt to fix a cat flap into an existing glass pane that has not been manufactured specifically for the purpose.

Place the Flap

Cat flaps allow your pet to leave and come at their own pace, giving them the ability to unwind in the home whenever they feel like it. However, if you have an uPVC door, it may be difficult to put in an animal flap, especially when you don't have a glass pane that can be cut to accommodate one. If you're willing to buy and install a new half-glazed uPVC panel, then it's possible to fit the cat flap to the doors. It's not as easy as cutting a hole in the door though and there are a few things you'll need first to ensure it's secure.

A upvc door panels with cat flap, GRP or composite door panel is typically made up of a flimsy plastic outer skin joined to a soft polystyrene core that is insulating. The material is quite fragile and care should be taken when cutting through it to avoid damaging. This kind of door typically includes a template that you can use as a guide for cutting the hole in your door.

After you've marked the location of the hole in your door, it's time to install the flap itself. You can buy and fit a wide variety of different models that range from simple push-button operated models to microchip-activated ones that only let in your pet. Whatever type of cat flaps you select it's essential that your cat is able to use the flap without getting stuck outside in the rain.

It is a good idea to choose circular fittings instead of one that is square, because circles can be more securely cut into the door glass. It's because square holes are more likely to crack the glass when drilled. This is also a safer choice because you won't need to drill into the toughened glass which could break and cause harm to your pet or family members. This is especially important if you have child or an elderly person living in your home who could be injured by shards of glass.