• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Replacing a Window Handle

The replacement of the handle on your window handles for upvc is a simple project that can be completed in the comfort of your own home. Follow these handy tips for smooth operation and a stunning appearance.

Remove the screws from your uPVC handle to expose the screws. Take a measurement of the spindle to be sure you're getting the right size replacement.

1. Measure the Spindle length

If you're replacing a window handle it's crucial to determine the size of the spindle correctly. This is because it will affect how tight or loose the handle is and whether it locks correctly in the window frame. The spindle is the metal shaft that connects to the handle as well as the lock inside the frame of the window. The spindle is either an industry standard cross-section of 8mm or the earlier 9mm versions. The modern industry standard is 8mm however this wasn't always the case so when buying a new handle it's essential to check the measurements.

Take the handle off. This can be done easily by turning the handle in the open position, then unscrewing two screws that hold the handle in place (which are usually hidden behind plastic caps that must be removed). Once the handle is removed, measure the distance from the base to the end. This will give you the measurement needed to purchase a new one.

There are many options when it comes time to choose the right window handle. From sleek chrome that fits into modern homes to traditional burnished bronze that looks beautiful in restored Georgian rooms, or the more classic Tudor cottages with mongoose tails curled. There are a lot of options, but the most important thing is to pick the style that is appropriate to your home's style.

Espag handles are usually fitted to uPVC windows and are identical in size, with 43mm centres (2 fixings). Cockspur handles vary between 58mm and 62mm however there are replacements for both sizes. Window handles from Cadenza come in an entirely different dimension due to their angle blade that operates the multi-point sash lock door handles mechanism within the window.

When choosing a window handle it is important to consider the hand you use to open your door. Inline espag handles can be used with either left or right-handed windows. Cranked window handles can only be used for windows that open in one direction.

2. Remove the Handle

The handle may be damaged or worn out, a window handle that falls off can be a real pain. However, the good part is that replacing a uPVC window handle is a straightforward job that you can do yourself. You only need some basic hand [Redirect Only] tools and time to complete the process.

First, you need to open the window and ensure that it is in an unlocked position. The next step is to remove the screws that are holding the handle in place. Once these caps are removed, you can begin working on the removal of the handle itself.

The handle is attached to a spindle in the window frame. Based on the type the handle is held in place either by a screw or a pin. The most common handle types are inline Espagnolette handles and handles with cockspurs. Both these types of handles are employed on casement windows, which includes aluminum windows. You can lock the handles by using a key to stop unauthorised access from the outside. You can also lock the handles by turning them clockwise.

To take the handle off, you'll need a screwdriver with a flat blade to loosen the clip that holds the handle. After the clip has been released, the handle will be able to slide off the spindle. After the handle has been removed, you'll have to determine the length of the spindle to ensure that your new handle is compatible with this size.

Once you have the right size, you can now put the new handle in place. It is crucial to ensure that the handle is securely fastened and rotates in the proper direction (clockwise when the handle is open and counterclockwise if handle closes). It is also crucial to check that it has not been fitted upside down.

In the end, you must replace the screw cap caps. After you've completed this step, you can test the handle to be sure it is working correctly. It is also recommended to test the locking mechanism by moving the handle to the locked position, and then back again.

3. Take the Screws off

A uPVC handle is an important component of any house and is the first item to show signs of wear or damage. This could be due natural elements, regular use or even intentional damage by criminals trying to gain access to your home. But, a simple fix will solve the issue and stop the issue from occurring again.

UPVC handles for double glazed doors can also be difficult to remove when the locking mechanisms are not working correctly. It's often possible to solve the problem by replacing the multipoint locking mechanism, rather than the entire handle. This can help you save money.

After removing the old handle, you'll need to remove the screws that secured it. The screws are typically located on the inside of the base of the handle. It may be necessary to use a screwdriver do this. Be careful not to tighten too much the handle as this could cause it to become loose.

You'll then have to locate the fixing screws or pins that hold the new handle in place. They're usually on the inside of the handle base. You'll need a screwdriver to remove them. After they've been removed, you'll need to replace the screw caps in the event that you want to do so and test the new handle to make sure it's working properly.

If you're ready to put in the new handle, simply align the spindle with the cutout in the window mechanism and screw it in the right position. If you wish to replace the screws, make sure the handle is in a slack position and any screws are securely secured. You're done! Now you can enjoy the new window handle. This should help you avoid costly door and window replacements in the near future. Contact us if you need more information on this or any other aspect of your uPVC window.

4. Install the new handle

The replacement of a damaged window handle or updating it is simple and can be completed within a few easy steps. The first step is to determine the type of handle, measure its spindle and identify the tools you will need to complete the task. Safety is always the top priority when working with tools and windows. Be sure to follow the steps and ensure that you have the right handle for use.

The first step is to find the screws that hold your current window handle in place and take them out, while maintaining an appropriate grip on the handle itself to stop it from crashing and causing injury. After the screws have been removed and repositioned, they can be put in a safe place to be replaced in the future.

After you have removed the handle, you are now able to install your new one. It is crucial that the handle fits perfectly to ensure it is functional and secures the window in its place. Then, slide the square metal bar on the handle into the window mechanism hole.

Now that your new handle is installed, the final step is to replace the caps on the screws and test it to make sure it works. If you aren't satisfied with the results or if the window does not open and close as it should, the next step is to contact our experts who will be able to assist.

Almost all homes in the UK have uPVC windows and as so, a large number of them will have to be replaced at some point due to wear or breakage. The process is relatively straightforward and can be completed by anyone with a little experience in DIY. The most crucial aspect to the success of the procedure is ensuring that you're using a handle that is compatible with your existing window in terms of size and design. If you're not sure what kind of handle you'll require, don't hesitate to get in touch with our team who will be able to help you navigate the various choices available.