• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles of your home are an essential element of your interior design. A new handle can bring your home's decor and interior up-to-date.

Over time the knobs on your door could become stiff, or even break. These are indicators that it's time to replace the knobs. This guide will help you select the best door handle replacement for your home.

Door Knobs

Door handles can enhance the look of your house while making it easier for people to open and shut doors. They are available in a variety of colors, finishes, and styles to match your decor. If yours have started to show signs or need an upgrade You can change them in just a few simple steps.

You need to locate the shaft, or spindle through which the knob is attached to the door. Some have a small hole that you can insert a narrow screwdriver into to release the set screws that hold the knob in place. Others have a thin slot or hole that can be used with a flathead screwdriver to press on a spring-activated nut, known as a detent. When you press this pin it opens the latch mechanism and allows you to pull or push the knob.

After you have ahold of the shaft or spindle take off the door knob and replace it with the new one. Align it correctly and check that the latch functions properly before tightening the new set screws.

After replacing the knob, place the rod that is attached to the latch over the hole on the door. Lock it in place using the rod system on the second knob. Make sure that the holes are aligned, then tighten the latch plate screws.

Some people prefer a brushed or smooth metal finish for their door hardware to give their home a sleek and contemporary look. This will match their other furniture. Others prefer a more rustic design, which pairs well with rustic-styled rooms. If you have members of your household who have mobility issues You might be interested in an rim lock or a lever-style door knobs, which require less pressure to operate.

Other aspects are being taken into consideration more and more in the design of door handles. Accessibility and control of infections have been major considerations when it comes to developing new designs for handles. For example, some handle designs can be operated by a person's arm.

Latch

The latch that holds the door handle open will wear down as time passes. Changing out the old latch to fit a new handle can be an easy DIY project and will make a significant change in the way your door opens and closes.

Depending on the type of knob you are using depending on the type of handle you have, the latch may be part of the knob itself, or it might be an independent piece that is attached to the door. In any case, you'll follow the same steps for removing and replacing. It's easy to remove the old latch, especially if you have doors with a "magic" button. This tiny pressure-slot, found on the side knob, is what you need to press in order to pop the latch out of the handle.

If your handle doesn't have this button the first step is to take off any cover plates that rest over the latch plate. These are usually rectangular or circular and can be removed using a screwdriver to pry them off of the handle. Some have a slot in which you can insert your screwdriver. Other handles simply snap off.

Next, you will want to loosen the two machine screws that hold the latch and the plate to the door handle. You'll need to keep these shorter screws with sharp tips in a safe location in order to reuse them in the future. After the screws have been removed, you can take the latch plate as well as the mechanism from the hole and put it aside.

Then you can begin to install the new latch. Insert the inside plate of the latch into the hole in the door handle lock repair and secure it with the provided hardware. Make sure that the square pin on the interior of the latch faces the latching mechanism of the handle and aligns with the screw holes on the other sides of the handle. Then, secure the exterior latch plate with the provided screws.

Strike Plate

It is common to replace a door lock handle repair handle if it is loose or isn't locking properly. This is usually due to malfunctioning parts of the latching system, for example the strike plate being too short or has moved up or downward on the doorjamb with time. This project allows you to replace your old strikeplate with a more substantial one, which will offer better security for your door handles repair near me and keep it shut.

To check if the problem is caused by the strike plate, apply some lipstick or a similar marking material to the bolt that is used to latch. Close the door and try to latch it. If the mark is below your strike plate hole, it indicates that the plate is too small and the door won't latch. If the mark is higher than the strike hole on the plate, it's likely that the strike plate has been moved up or down on the doorjamb.

You might be able to put the new strikeplate in the one you have already installed using the screws included with it, based on your composite door handle replacement. But, you may have to drill holes prior to drilling and then chisel a bit of the wood to ensure it's snugly fitted. If this is the case Be careful not to chisel out too much wood or you may ruin the integrity of the doorjamb.

Installing a new style box strike plate will provide the lock with a stronger hold on the doors and require more force to open the doors. It usually requires two larger screws to anchor the strike plate in the door frame. You'll need remove the old strike plate before drilling and chiseling the wood to create space for [Redirect-iFrame] the new one.

This difficult-to-find strike plate was specifically designed to work with rim locks from the past, and is made of robust solid brass with a heavy duty thickness. It comes with both wood screws and machine screws, so you'll have the right hardware for the job. Keep in mind that wood screws have a pointed tip whereas machine screws are blunter.