• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It might seem daunting to set up a cat flap but with the right guidelines, it's not all that difficult. Firstly, determine how high you want the cat flap fitting flap to be (on average or belly height). Mark this point on the door and use the template provided as a guide to drill.

If you have a kitten who is still a baby then gently prop the door slightly open and encourage it to walk through. Reward the kitten every time it passes.

Take a measurement of the door

A cat flap is a great option to let your pet leave and come into and out of your home whenever it likes. This can keep your cat in good health as it will ensure it is exercising regularly and be able to go back inside when it is stranded outside in bad weather. This will reduce the amount of time you spend letting your cat in or out and also make your home secure by letting you know when it has left.

However, it is essential that the flap for your cat is fitted correctly to prevent your pet from escaping through it or be pushed through by any other animals (e.g. dogs). It is important to measure the height of your pet's belly and the width of the doorway at your home to ensure the flap is at the right height. You can adjust the height of your flap in case your cat is taller or smaller than average.

The next step is to utilize a spirit level mark the center of the door, where you will install the flap. Then, using the mark as an outline, cut the shape of the flap on the door with a Jigsaw. After you've cut the space, sand down the edges of the door to create smooth surfaces and drill any fixing holes that are required.

Fitting a cat flap should not take more than two hours. However, the process may be a bit more difficult in the event that you have to put it into the frame of a uPVC or composite door as these doors have various thicknesses which can affect how the holes are cut and what they are fixed into. This is why we always recommend hiring an expert to do the work, particularly when you've never dealt with glass before.

Measure Your Cat

A cat flap can save you from hours of hearing your pet's cries for you to let it out or in. This is especially helpful when you're at work most of the day and your cat is inside waiting until you get home in all weathers.

If you're planning to put a cat flap on your door, it is essential that you measure your cat before attempting the task. Although it might appear to be to be a simple task, it is important to make sure you measure correctly or your cat may be unable to use.

First of all, make sure that your cat is calm and not anxious prior to taking the measurements. You'll need to put your cat in a position where they cannot move. Also, ensure that the measuring tape is flat and not curved against their body. Keeping the measuring tape or ruler against their body from their head to the bottom of their tail will allow you to determine an accurate measurement.

Once you have your cat's measurement and measurements, you need to examine the door to decide the best place to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to pass through the door with minimal effort. This will also prevent the flap making quite a lot of noise when it swings open and shut.

You will need to take into consideration the thickness of the uPVC or composite door too. While all doors made of timber have a similar thickness, uPVC or composite doors can differ greatly in their overall structure. This can make the process of putting in a flap for your cat more difficult since you must ensure that the hole is the proper size.

It is also worth studying the instructions included with the cat flap kit to find an illustration template that can be used to determine the location of the hole in the door. This will help you to see the location where the opening should be, and also to ensure that the template is properly placed on the door. Utilizing a spirit level to check that the template is sitting in a straight line against the door can be extremely helpful.

Cut the Flap

You'll need to cut an opening in the door to accommodate your cat flap before you can install it. This can be a tricky job, and it is recommended that you seek the help of a professional cat flap fitting service for this job in case you don't have the skills or experience to do it yourself. It is also recommended that you review the directions that come with the kit to learn how to do this properly.

To do this you need to measure the height of your cat's or kitten's belly. Use this as a reference point. As a rule of thumb put the flap around 10-15 centimeters higher than the ground. This is the standard height of the belly for cats. This will allow your cat to move through the flap with ease and make it difficult for other cats or naughty neighbours to get inside or out.

Mark the position of the cat flap on the door using a pencil. If your kit has a template put it on top of the door. Use the markings on the template to drill holes at every corner. You will then be able to cut the shape of the template and replace it with your cat flap.

You can put in your cat flap yourself on a wood or uPVC door If you're comfortable with the use of a jigsaw. Be sure not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw cut the panel into a circle or square, depending on the design of your cat flap. Take your time and don't force the jigsaw into cutting faster.

After the hole has been cut then carefully insert the flap onto its new location and make sure that it's securely fixed. If it has caps for screws, then put them onto the screws that protrude. Once the screws are in place, sand the rough edges of the cut and then apply sealant around any gaps to ensure there are no draughts coming into your home.

Place the Flap

If you have a simple cat flap, you can leave it open and encourage your pet to use it by putting a small amount of cat food in the front of the door. You can also try pushing the cat with the help of a stick or your hands. Once your cat is accustomed to walking through the flap, it should be able to go in and out as it wants, so you can let it out and in without having to be there to open the door for it throughout the day (and likely in all weathers).

It is possible to fit the flap inside a UPVC door or a glass door, however it may not be as easy as installing one inside a wooden exterior door. This is because the UPVC doors and certain types of glass doors don't have an even thickness. This can have a major impact on the way you cut out the flap's hole and how well the flap fits after installation.

The mounting kit could include a template that shows you where to drill holes. If the kit does not come with a template, you can create one by yourself. It's important to not push the jigsaw too hard when cutting, so it doesn't leave a bigger than needed hole in your door.

Some cat flaps are available in circular shapes, which can be more difficult to install. If you have a circular flap, it is essential to ensure that the hole is in the proper location on your door as if it's not, cat flap fitting your cat won't be able to use it and could be stranded in the open all day (or even at night).

Some models of cat flap have locks which let you manage the time your cat flap installation bristol comes and goes. These are useful if your pet is afraid of going out in the dark, or coming back in the dark. They can also be useful for those who work all day. The lock can be turned on to allow entry or exit, and some locks can be locked in both directions, which allows you to close the door completely, which is especially beneficial for older or ill cats who don't want to go out in the rain.