• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It may seem difficult to put up the flap for your cat but with the right instructions it's not that hard. Determine how high you would like the flap to be (normally, it is at the belly height). Mark this point on the door and then use the template as a guideline to drill.

If you have a kitten who is still a newborn, gently prop the door slightly open and invite it to pass through. Reward it each time it goes through.

Measure the Door

A cat flap is an excellent option to allow your pet to leave and come into and out of your home as it likes. This can keep your cat healthy since it ensures that it gets enough exercise and will also allow it to return inside if it is stranded outside during bad weather. This will reduce the amount of time you allow your cat out or in and also make your home secure by letting you know when it's gone.

It is crucial that the cat flap is correctly fitted to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). It is essential to measure the height of your pet's belly and the doorway to your home so that you can ensure that the flap is at the proper height. You can adjust the height of your flap when your cat flap fitting near me is smaller or taller than the average.

The next step is to make use of a spirit level to mark the center of the door that you will put the flap. Then, using the marks as an indication, cut out the contour of the flap with a jigsaw. After you've cut the area, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes that are needed.

Installing a cat flap ought to not take more than two hours. However, the process could be a bit more difficult if you need to fit it into the door of a uPVC or composite door since these doors come in various thicknesses, which affect how the holes are cut and the type of door they are inserted into. We always recommend to consult with a professional when this is your first time working with glass.

Measure Your Cat

A cat flap can save you from hours of hearing your pet's cries to let it out or in. This is particularly helpful when you're at working all day and your cat has to stay in the waiting room until you come home in any weather.

It is crucial to first measure your cat before attempting to install. Although it might seem like an easy task, it is important to get the measurement right or your pet will find it difficult to use.

Firstly, make sure your cat is calm and not feeling stressed before you take the measurements. You'll need to hold them in a way that they cannot move and make sure that the ruler or measuring tape is flat against their body, not bending in any place. You can take a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you've got the measurement of your cat, it is time to look at the door and decide where to place the flap. It is advisable to position the flap in the middle of your cat's stomach as it will allow them to move through it without too much effort. This will also avoid the flap from making quite a lot of noise when it opens and closes.

You should also take into consideration the thickness and structure of the uPVC door or composite. While all timber doors have a similar thickness to them, uPVC or composite doors may differ in their overall structure. This can make the process of putting in an enclosure for your cat more difficult since you must ensure that the hole is of the correct size.

It is also worthwhile looking through the instructions included with the cat flap kit to locate an outline of the template that can be used to mark out the location of the hole inside the door. This will help you to see the location where the opening should be and ensure that the template is placed correctly on the door. Using a spirit-level to check that the template is sitting right against the door can prove beneficial.

Cut the Flap

You'll need to cut a hole in the door to accommodate your cat flap prior to you can attach it. This can be a tricky job and it is recommended that you get help from a professional cat flap fitting service for this step if you don't have the knowledge or skills to do it yourself. It is also recommended that you consult the instructions that come with the cat flap kit to learn how to do this correctly.

You can use the height of the cat's or kitten's stomach as a reference. As a general rule, place the cat flap approximately 10-15 centimeters above the ground. This is the average height of the stomach for cats. This will let your cat pass through the flap easily and make it difficult for other cats and nosy neighbours to get inside or out.

Once you've decided where the cat flap should be placed, mark this position on the door with a pencil. If your kit comes with a template for paper, place it over the door and use the markings to drill holes into every corner of the template. Then, you should be able to cut the template and Cat flap fitting replace it with the cat flap in upvc door panel flap.

If you are installing your cat flap on an entryway made of wood or uPVC, it is possible to do this yourself if you are confident enough to use using a jigsaw. Be cautious not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw to cut the panel into a circle or square, depending on the design of your cat flap. Make sure to take your time and don't force the jigsaw into cutting faster.

Once the hole has been cut, carefully place the cat flap into its new place of residence. Make sure it is solidly secured. If it features caps on the screws, then place them onto the screws that protrude. After the screws are installed, sand the rough edges and seal any gaps. This will stop the entry of draughts into your home.

Install the Flap

If you have a simple cat flap, you can open it and encourage your pet to go through by placing a small amount of cat food in front of the door. Alternatively you can try pushing the cat through with your hands or a stick. Once your pet has become comfortable walking through the flap, it will be in a position to move at will. This allows you to let it in and out as it wishes.

It is possible to fit the flap onto a UPVC or glass door but it's not as simple as fitting one into a timber external door since UPVC and some glass cat flap installation near me doors don't have a consistent thickness. This could have an enormous impact on the way you cut the flap's hole and whether the flap fits correctly after installation.

Depending on the model of cat flap you choose It may include a mounting kit and a template that will show exactly where to drill holes for it. If the kit does not include a template you can make one by yourself. When cutting, it's important to keep the jigsaw from being pushed too to the point that you make a larger hole than is necessary in your door.

The majority of cat flaps are rectangular or square in shape but there are some that are circular, and they are typically more difficult to install. If you have a circular flap, make sure the hole is located in the right place on your door. In the event that it is not, the cat may not be able to use it, and might be outside all day (or night).

Some cat flaps come with locks that allow you to manage when your cat comes and goes. These are useful if your pet is afraid of going out in the dark, or coming back inside at night. They can also be helpful for those who work all day. The lock can be used for entry or exit and some can be locked in either direction permitting you to close the door completely. This is particularly beneficial for sick or elderly cats who aren't willing to go out in rainy weather.