• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat leave and come back at their own pace, without having to let them in or out. They can also help prevent your cat from toileting inside the house.

fitting cat flap in upvc door panel a cat flap in the door panel made of upvc is much simpler than installing one in glass doors with cat flap, however it requires some knowledge and the appropriate tools.

Take a measurement of the door

Installing a cat flap fitting door into a front door could be difficult, but as long as the cat flap is of the appropriate one and you follow the instructions you can make it less difficult. We will demonstrate how to mark the shape and use an jigsaw to cut the door area. Then we will finish the job by attaching the cat flap. This will ensure that the flap stays in place and protects the door from rain and wind which can cause damage.

The first thing you need to do is take a measurement of the width of your pet in order to get an accurate measurement of the size of cat flap you will require. This will ensure that the flap is big enough to allow your pet to leave and enter the home without having to open or close the door every time, but also small enough to prevent the pet from straying too far either way.

Once you have the measurements, you can determine the area on the door where the template should be positioned, typically this is done using an X, however some kits include a drawing that shows the location to drill, if you have one, then attach it to the door and draw a line around it. If your door has sill or moulding along the bottom edge ensure that you have enough clearance from these because this will keep your cat safe and prevent them gaining access to your home.

Put on your eye protection as well as a dust mask and using a jigsaw begin cutting along the line you have pencilled in, but don't push the blade too hard, as this could make it cut faster than you want it to. Utilize a set square to ensure that you are cutting the material in a proper manner and that the cut is a rectangle. Once you are satisfied with the result, you are able to remove the remaining door material.

Draw a Line

The cat flap is a great method to let your pet in and out without worrying about them being a nuisance to guests or leaving unwanted gifts inside the house. It also reduces drafts and helps to keep the temperature of your home steady. Installing a cat flap on your door may seem daunting to those who haven't done it before. Many people call a professional joiner or carpenter to do the work. While this is definitely an option, it is possible to do the job yourself if you own the right tools and follow the instructions with care.

This is much easier to do on a wooden door, fitting cat flap in upvc door panel but it is possible with uPVC. However it is important to be cautious not to harm the doors because this will cause the door to be damaged and invalidate your warranty. First, you must measure the door to ensure that it can accommodate the new cat-flap. If you have an ordinary uPVC panel it should be a breeze. However in the case of composite or a different type of door, you may require more care.

The next step is to measure the size of your cat's belly. This is the amount of height between the floor and the underside of your cat's stomach. You will need to locate a space on the door that allows your cat to move through easily. Once you have the information you'll need to mark the area using a spirit level and a pencil so you are sure that the hole will be suitable for your cat.

Once you've marked the area, it's time to cut the hole. You will need an jigsaw. It is crucial to take your time in order to ensure that the cuts are smooth and straight rather than uneven and rough, as this could damage your door. Be sure to wear safety glasses and a dust mask when working with the jigsaw as dust from the saw could be harmful to your health. Once you've finished cutting the hole, you'll require sandpaper to smooth the edges so that the cat flap is easily inserted into the hole.

Cut a hole

The process of fitting a cat flap into an existing door panel or double glazing sealed unit can be quite difficult. If you're not skilled in DIY, it is best to hire an expert to do the job for you. A mistake in the process may not only look ugly, but it could also be a security risk and also allow cold air to enter when the cat is outside and hot air to escape once inside.

The first thing you need to do is draw the position of the hole in the door using an eraser and a spirit level. This will ensure that it is properly positioned and that it runs flush with all the other parts of the door. It is important to have a piece of sandpaper at hand to smooth any edges.

Wear any safety equipment you need to work with a power tool. If you are worried about the noise of the jigsaw, consider buying one that is cordless, which is quieter and more user-friendly to use.

You should only remove the material that is required to fit the cat flap. A small amount of material will be needed to cover the thickness of the wall of the cat flap itself but cutting off more than this can cause problems or damage the doors frame.

If the door is made of upvc and is made of metal, or has a frame, it may interfere with the microchip flap. In this scenario, you will need to make an oversize hole to ensure that the metal does not get in contact with the wall of the flap.

If you are fitting a cat flap in a upvc door an animal flap to an upvc door or a double-glazed window with a metal frame, you'll need to speak to a professional who can supply you with a new pane of glass with the hole for the cat flap premade inside. It will be much cheaper to have this done than to attempt to fix the cat flap onto an existing glass pane that hasn't been designed specifically for the purpose.

Place the Flap

Cat flaps allow your pet the freedom to move around anytime they want, allowing them to relax at home whenever they want to. If you have a uPVC front door, it may be difficult to put in the cat flap. This is especially the case if you do not own a glass panel which can be cut. If you're willing to buy and install a half-glazed replacement uPVC panel then it is possible to add the cat flap to these doors. It's not as simple as just making a hole in the door though and there are a few things you'll need first to ensure that it's secure.

A composite door panel usually has a flimsy plastic outer skin bonded to a soft polystyrene core that is insulating. It is essential to be careful when cutting the material. This kind of door fitting cat flap in upvc door panel comes with a template that you can use to cut the hole.

After you've marked the location of the hole in your door, it's now time to install the flap itself. You can buy and fit various models that range from simple push-button operated models to microchip-activated ones that only let in your pet. Whatever type of cat flap you pick it's essential that your cat can use the flap without getting stuck outside in bad weather.

It's a good idea to choose circular fittings instead of a square one, as circles are more securely cut into door glass. This is because square holes leave the glass vulnerable to cracking if drills are used on it. It's also a much safer option to use as you're not putting yourself at risk by having to drill into toughened glass that could shatter and injure your pet or family members. This is especially crucial if you have elderly or children living in your home that could be hurt by glass shattering.