• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes need to be checked regularly for mold, mildew and damage. By catching these problems early you can save money on future repairs.

The sash is an inside frame that can move vertically up and down in windows that are open. This article will teach you how to do simple repairs to sash.

Weather Stripping

Wooden window sashes can give an elegant appearance to your home. They are also durable and last for a long time when they are maintained properly. However, they may become damaged or degraded as time passes due to exposure to elements and normal wear and tear. However, sash repair experts can restore your windows back to their original condition and keep them looking fantastic for much longer than newer replacement windows.

The first step in repair sash windows is to address weather stripping, which is found on both the sash and frame. If it's worn or loose, out, it can cause drafts and other issues. To fix it, begin by determining the brand of your window and the date of manufacture for the glass (etched in the corner of the glass or on the aluminum spacer between panes). Take the sash off, and mark its width and height so you can find a replacement weather stripping that matches.

Then, take it off and place it on a work surface so that you can reach all four sides. If your sash was repairing double glazed windows-hung, Window Sash Repairs you must remove the weights with their ropes that should fall into the pocket inside the jamb lining. Once you've taken the sash off and the weights, use a utility knife to cut away the old weather stripping at the corners, and then take it off by hand or using a putty blade.

Once the sash is clear and clean, you can put in the parting stops. These are long pieces that split the sashes. Pam likes to replace these with standard 1/2-inch-by 3/4-inch window repairing trim from the lumberyard, however you could also use scrap wood.

After removing the parting stop and trimming it to length after which, apply a thin layer of glazing compound on the bottom of the sash. Smooth it out using your putty knife, and then let it dry for at least a few days. After it has fully dried, apply a top coat of acrylic latex paint. This coating will protect the putty and give your sash a fresh appearance.

Sash Hardware

The hardware that supports window repairs sashes susceptible to wear and tear due to the wear and tear of use, and the result can be a window or door that won't open or close easily. It's a good idea to know that replacing or fixing this hardware is usually easy and affordable. If you're having difficulty opening the sash, spray some lubricant into the jamb channel. Then slide the sash up and open to see if this resolves the problem. If not, the issue is most likely due to the sash balance, and you'll have to take off the sash to gain access to the hardware.

The ideal situation is for window sashes to move open and shut without effort, but this can be difficult when the weights wear out or if the sash that joins rail isn't properly coated. This problem can be caused by a number of reasons, such as lack of maintenance or by the wrong weight rating for the specific sash.

If the hinges on windows begin to slide, this can cause the sash drag and then hit the frame at the opposite corner (Photo 1). To resolve this issue, first make sure the sash fits squarely in the frame's opening and then take it out of the window. If the sash has been attached to the hinge arm, take it off the hinge and replace it. (Photo 2). Install the new sash next (Photo 3).

Due to hinges that are sagging, and a general lack in energy efficiency, old windows particularly those in older homes, may be difficult to open and close. Many times, a few simple fixes can help these windows function smoothly once more and help homeowners save money on energy bills.

It is essential to have the tools needed before you begin. Mark the location of the hinge channel on the frame (Photo 1) using pencil. This will allow you to place the channel in the right place when you are finished. Take the sash off, and remove all the hardware including the parting beads, cords, and chains that keep the sash in place. The nozzle shield of the heat gun and a medium setting will soften any hardened glue. Remove the old sash, and keep it in a bag labeled.

Sash Weights

Whether your window sash repairs are to replace a broken cord or to keep the windows functional and functional, replacing worn-out weights on sash can improve sash operation and cut down on energy consumption. Sash weights are hefty lead or iron cylinders, which are enclosed inside a hidden compartment and linked to the moveable sash by rope. They function as counterbalances and allow you to open and close the window without having to use mechanical or electrical devices. When they fail, sashweights tend to be ignored or disabled by homeowners.

It's not easy to retrieve an sash-weight which has fallen from the cavity, so you'll need to find one that fits correctly. You will also need a new piece of string, a length of the sash cord, as well as some sash pulleys to connect the new sash weights the sash cord.

Mortise and Tenon joints are used to join windows made of older wood. Pin punch and hammer can be used to remove the wood pegs that hold the components together. The majority of them are large on one side, and smaller on the other. It is crucial to remove first the smaller diameter sides. Later sashes made use of glue instead of pins. They can be separated by using a knife and mallet.

After the sash is released, you can remove stops on the sash and get access to the weight pockets. Usually this is accomplished by drilling an opening in the bottom of each jamb. The hole is then covered with a wooden panel that can be removed to reveal the interior workings.

Once you have the sash stopped and the access panel removed, you'll be able to remove the old sash weight and replace it with the new. Be sure to weigh the sash prior to you begin, as the old weights could be a different size than what is needed. Once the new weight has been installed, thread an appropriate length of string through the pulling mechanism. Then, you can attach the string to your boxed frame. Leave a few inches of space at the end of the string to allow future adjustments.

Sash Cords

In the majority of old double-hung windows, a cord or chain is affixed to the weights. This helps keep the sashes within the jamb in a balanced manner. As time passes, these cords may break, making it difficult to raise the window. A new sash cord will give you the ability to move the sash up and down and keep it in place when opened.

To replace sash cords, the first step is to remove the access panels from the jambs. They are usually screwed or nailed in and must be removed. You might be able to use a hammer or chisel to remove them, but it's always better to lay down dust sheets before commencing any work.

After removing the access panel, you can begin working on the sash. Prise the narrow parting beads (also called "tie rails") out of their grooves using flat bar or chisel. It's important to take your time, as these are often stuck or nailed to the floor. If the sash remains in place, pull the mortise-and-tenon joints out with a hammer or screwdriver and then remove each wood peg. The sash should be able move freely, however it might require some lubrication to make it feel less stiff.

With the sash open Take a measurement of the sash chain to extend from the pulley at the top of the jamb to the sash slot at the bottom. Cut the cord or chain, and then attach it as described in the previous step. You can use a hammer, nails or screws. However nails are less likely than screws to cause damage.

It is best to keep the weights that came with the original counterbalance unless you have purchased a kit to replace the counterbalance that was previously installed. They're not costly and easy to install if you buy them at architectural salvage stores. Based on the size of your window one or two sash weights could be needed to keep it in an open position.