• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles in your home are an essential element of your design. A new handle can bring your decor and space up to date.

Over time your knobs on your doors may begin to feel stiff, or break. These are indicators that it's time to replace the knobs. This guide will help you pick the correct door handle replacement for your home.

Door Knobs

Door handles add to the look of your home while also making it easier for people to open and shut doors. They come in a variety of finishes, colors and types to complement your decor. If yours have started to show signs of wear or requires an upgrade it is possible to change them in just a few simple steps.

The first thing to find is the spindle or shaft through which the knob is attached to the door. Some knobs have a tiny hole that you can put a narrow screwdriver into to loosen the set screws holding the handle in place. Some have a tiny slot, or hole, that you can press a spring-activated detent pin with a flathead. When you press the pin and the latch mechanism opens, it releases and allows you to pull or push the knob.

Once you have the spindle, or shaft in your hand take the knob off and replace it. Align it correctly and check whether the latch works before tightening the new set screws.

After you've replaced the knob, place the latch rod in position over the door's hole and lock it in place with the rod mechanism on the second knob. Make sure that the holes are aligned, then tighten the latch plate screws.

Some prefer a smooth or brushed metal finish for their door hardware for an elegant, modern look that complements other furniture in their homes. Some prefer a rustic style that goes well with farmhouse-styled rooms. If you have members of your household who are unable to move, you may think about a rim lock or lever style door knob, which require less pressure to operate.

While aesthetics are traditionally the primary consideration for upvc door handle repair near me handle design, other aspects are being taken into consideration as well. Accessibility and control of infections are the main issues that have led to the development of new and innovative designs for handles like those which can be operated by the forearms of a person.

Latch

The latch that holds the door handle open can wear down as time passes. Changing out the old latch to make room for an entirely new handle can be an easy DIY task and it will make a huge difference in how your door handles repair near me opens and closes.

Depending on the type of knob you have depending on the type of handle you have, the latch may be a part of the knob itself or it could be an independent piece attached to the door. In either case, the same process for removing and installing will apply. Getting the old latch out of place is fairly easy, especially if your door lock handle repair handle has what's called a "magic button". This little pressure-slot, located on the side knob is the one you'll need to press in order to remove the latch of the handle.

If your handle isn't equipped with this button the first step is to remove any cover plates that rest over the latch plate. They are typically rectangular or circular and can be removed with a screwdriver. Some have a small slot inside that you can slide your screwdriver into, while others simply snap off.

Next, you will want to remove the two machine screws that hold the latch and the plate to the door handle. These are the shorter screws with a sharp tip You will need to keep these in a secure location to reuse them in later steps. Once the screws are removed you can pull the latch plate and mechanism out of the hole in the door handle repair upvc door handle Plate (bbs.wj10001.com) and place it in a safe place.

You can now begin working on the new latch. Place the inside of the latch into the hole in the door and secure it using the hardware provided. Make sure that the square pin in the interior of the latch faces the latching mechanism in the handle and aligns with the other holes for screws in the handle. Then, secure the exterior latch plate using the screws supplied.

Strike Plate

It is typical to replace a door handle if it is loose or doesn't lock properly. This is usually caused by incorrectly aligned parts of the latching system, such as a striking plate that's either too small or has moved upwards or down on the doorjamb with time. This project allows you to replace your old strikeplate with an extended one, which will provide more security for your door and ensure it stays shut.

Apply a lipstick or other marking material on the latch bolt to determine if it's the strike plate. Close the door, then try to latch it. If the mark is below the strike plate hole, this indicates that your door won't latch due to the fact that the plate is too short. If the mark is above or below the strikeplate hole, the strikeplate is likely to have been moved upwards or downwards on the doorjamb.

You might be able to screw the new strikeplate into place over the one you have already installed using the screws that come with it, based on the door you have. However, door Handle repair plate you may need to drill holes first, and then chisel some of the wood to make sure it's snugly fitted. If this is the case, be careful not to cut too hard or you'll damage the strength of your doorjamb.

You could also try installing a new strike plate, which provides the lock with a stronger grip on the door and requires more force to open it. Typically, it requires two longer screws that anchor the strike plate to the frame of the door. To do this, you'll need to take off the existing strike plate and then drill and chisel out the wood to make space for the new one.

This hard-to-find strike plate is specifically designed to work with antique rim locks, and it's constructed of sturdy solid brass in the heavy duty thickness. It comes with wood screws and machine screws, ensuring that you have the right hardware for the job. Keep in mind that wood screws have a pointed point, whereas machine screws are blunter.