• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles seem like something minor but if you aren't happy with the way they look or are unable to use them and use, you should consider replacing them. With a bit of patience, you can put in a new handle in no time.

Modern door handles are equipped with cover plates that hide the screws to create a stylish appearance. If the new handle doesn't have screws already connected, you'll have to attach them separately.

Remove the old handle

The door handle is not just a decorative feature for your home, but it's also an important safety feature that lets you to lock and unlock the door. Over time the door handle could begin to lose its grip or feel a bit loose. It could also appear aged and worn. This is a good indication that it's time to replace the upvc door handle replacement handle.

If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means you can no longer lock or unlock your door, which could pose the risk of security for you and your family.

It is also an excellent idea to replace your door handle in the event that it's damaged or broken. A broken door handle can be very dangerous, especially if your children or elderly family members struggle to open it and end up trapped inside. Fortunately, it's fairly simple to fix a damaged door handle by replacing window handles the old one.

Most modern door handles are a standard size and so they should fit any door. If you are not sure if the new door handle you are buying will work, take out the old one and measure the holes in its housing. This will allow you to buy the right door handle.

It is easiest to remove the door handle by taking it off from the door. This is typically done with the screw driver. However, some door handles have an outer cover plate that hides the screws that mount them, so you'll need to remove this cover plate to get access to the screws underneath. After you have removed the old handle, take note of the way the spindle has been connected. This will help you align the new handle.

You can also remove the door handle by removing the latch mechanism. This is typically done with a screwdriver but you'll need to locate the small latch, which should be at the edge of the trim piece. After you have removed the latch, take off the handle and the strike plate. Then remove the latch from the door's edge.

Removal of the Strike Plate

You'll have to replace your latch plate after replacing the handle. It's the part that holds the hole through which the latch of the door hooks when the door is closed. The new handles will have two latch plates that are circular and rectangular plate (see the above diagram that shows the parts of a door handle). If your current latch plate is a rectangular shape, switch it out for the round one so that the latch hooks into the strike plate in a manner that makes the handle more comfortable to operate.

The first step is to loosen the screw that holds the latch plate that was previously in place. The screws are often quite tight and require a lot of force to loosen them. If you can, it might be helpful to have another person assist you with this task.

The latch plate should come out of the door once the screws have been removed. If it's stuck or won't move using a nail file to scratch around the edges of the latch plate. This will sometimes free the plate.

Now you can prepare the new strike plate to be installed. Attach the latch plate to the doorjamb using the wood screws that were included with the new handles. Be careful not to tighten too much the screws, as this could damage the strike plate.

If you're not sure whether the latch plate is in its proper position, shut and open the door to check whether it latches and closes properly. If not, you'll need to adjust the strike plate either up or down, or move it forward or back, until the door closes and latches correctly.

If the door is still moving or jiggling, you may need to increase the size of the latch hole in the strike plate. This is more frequent for older doors, but could be due to wear and tear, hinge mortises that are too shallow or are not sized correctly for the latch, or from a broken or damaged strike plate. If this is the case, follow the exact procedure to adjust the strike plate, but with a metal file instead of an hammer and chisel.

Removing the Latch

The latch is the angled piece of metal that slides between the hole that runs along the inside edge of your door. The latch is pushed forward when you turn the handle. It also hooks into a hole in the frame of the upvc door handles to keep your door closed. If your door shakes when you close it, replacing the latch could be the only thing needed to fix the problem.

It's hard to see the screws that secure the latch to the door, but there's usually a small slot on the trim plate that allows you to insert a screwdriver in order to pry it off. Once you've removed the trim plate, it will be simple to remove the latch as well as the bolts that keep the spindle and latch in place.

If the latch cannot be easily removed, use a paperclip or tool to take it off the handle mechanism. Insert the item into the recessed latch slot and gently turn or jiggle it until you feel the latch and handle begin to split. You may need to repeat this several times before the latch comes loose enough to pull out.

You should be able to slide the new latch into its slot without any issues after you've removed the old one. Use the new screws to connect the latch to the strike plate or door frame. Make sure it is correctly placed in the slot, aligned with the screw chambers.

Before installing the new handle, be sure to measure your current backset (the distance from the centre of the big hole on the front surface of the door to the edge). Also, Door Handles ensure that the size of the latch on the new handle matches the measurement of your existing handle.

If you are replacing the latch or handle or handle, or if your previous lock cylinder is damaged, then you will need an entirely new one. If you are not changing locks the new lock should fit into your existing recess, and work with the keys you have already. Make sure you select a latch with rectangular cover plates that match your old handles.

Take off the cover plate

You can replace your door handles with a contemporary rose and lever designs to improve the look of your home. You can purchase complete sets of door handles that come with the appropriate escutcheons and privacy adjustor kits.

The first step in replacing the door handle inside is to remove the cover plate or rose, which conceals the screws and the mechanism within. Use a flathead to remove the plate. It may have an opening on one side or be secured by pins.

Remove the screw that holds the handle in the interior and place it aside when the cover plate has been removed. Remove the screws that secure both the outer and inner plates. You can loosen them with the help of a Philips Screwdriver. Remove the inner plates and latch from the door. Place them aside.

Most doors have an opening between the jamb of the door and the inside edge of the frame that makes room for a handle, however not all do. If yours doesn't then you'll have to drill a hole into the door to install the new handle. It's the same procedure as opening a door locked however you'll need to be extra careful not to damage the frame or door.

After the holes are drilled after which you'll have to put in new screws for the door knob. Buy the same size as the old screws to prevent getting the handle too tight or loose. You'll also need to install the new strike rod and latch plate that aren't included in most door handle sets.

If you're looking for a quality replacement set of interior door handles look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received hundreds of five-star reviews from satisfied customers. It's an excellent choice for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.