• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next-generation in car security. It is invisible to thieves and makes it impossible for them to open the vehicle without a unique pin code.

The system is built on your vehicle's CAN Data network, and is completely silent therefore it is not identified by common thieves' diagnostic tools or radio signals. The system doesn't require any cutting of the electrical circuit.

What is a Ghost Immobiliser?

A Ghost Immobiliser is a device that helps to protect your car from theft by blocking the engine from starting until you enter a unique pin code. It can be used on a wide variety of vehicles and unlike traditional immobilisers, it doesn't require a fob or key to operate. It is also extremely difficult to hack or bypass and works silently, meaning a thief would need to work quickly in order to get away without being caught.

It protects against key blocking, signal jamming and spoofing. These are all methods that thieves have used to unlock vehicles using standard immobiliser systems. The device also stops thieves from stealing keys by sifting through your letterbox or breaking inside your home to steal the remote control. The device is able to stop thieves from taking your joy even if they do manage to gain access to the key. It prevents the remote from being started until they have entered the code.

In contrast to passive immobilisers which require the fob or key to be pressed, a ghost immobiliser is designed to be completely sealed inside the engine and connects directly to the vehicle's CAN data circuit. The system creates the pin code by pressing buttons on the steering wheel, console or door panels of your car. You will have to enter this code before the engine can begin. The system can be switched into a service mode, which allows your car to start and drive for short periods of time without needing an PIN code. However the service mode will be terminated according to speed and time.

Because of the technology used in the process, it cannot be hacked or bypassed, even using high-tech equipment such as RF scanning or code grabbing devices. It is also impossible for a standard immobiliser to turn off because the device doesn't send the same signal that a typical vehicle immobiliser does and only is functional when connected directly to the CAN circuit.

As a result of its advanced technology and easy installation, the ghost immobiliser is now insurance Approved by TASSA (Tracking and Aftermarket Security System Association). We are a TASSA approved Ghost Installer who can install this device into your car to help you with insurance.

How does the Ghost Immobiliser Work?

In simple terms, an immobiliser functions by preventing your vehicle from starting if the wrong fob or key is used. This is done by sending a code to the vehicle's ECU (Engine Control Unit) - when this is sent through the wrong fob or key the ECU will not recognise it and, consequently your car will not start. This is why it's crucial to ensure that your car is equipped with an immobiliser by an established and trusted specialist.

At MotorGuard MotorGuard is the Midlands' leading vehicle security specialists and installers. We provide Autowatch ghost autowatch immobiliser immobilisers for many modern vehicles. You can be confident that your car's security will be protected from theft.

The Autowatch ghost 2 immobiliser reviews immobiliser is one of the first aftermarket CAN bus immobilisers and safeguards your vehicle from key-cloning, hacking, and theft. It is designed to be able to remain undetectable by car burglars because it does not use LED indicators or key fobs. It is also hidden in your vehicle's wiring so that no additional hardware is required.

Once installed, the system is linked to the CAN system of your vehicle and allows you to design a an individual disarm sequence using your own PIN code, which must be entered to allow you to drive the vehicle. The pin code can be as long as 20 presses long, which provides security. Should you forget your pin code, or if the button is damaged, the device comes with an emergency pin code that can be used to reset the button and allow your vehicle to start again.

The fact that the Ghost immobiliser cannot be bypassed or hackable is what makes it an effective weapon against thieves. In addition, it is also TASSA insurance-approved (Tracking and Aftermarket Security Systems Association) which could lower the cost of ghost immobiliser of your car insurance.

Ghost immobilisers continue to evolve as technology advances. In this regard, we recommend that you contact an Autowatch Ghost immobiliser fitting service as soon as you can to ensure your pleasure is completely protected. We can provide you with quality service whether you are purchasing an entirely new vehicle or upgrading your current vehicle.

Is Ghost Immobiliser compatible my car?

The Ghost is the first aftermarket CAN bus immobiliser system to provide complete protection against modern car theft. It safeguards against key hacking, cloning and ECU swapping and xn--3e0bj10cla276lwfb.com much more. The new TASSA verified Ghost-II systems also offers marking of your vehicle and linking to the International Security Register enabling your insurance company to verify that you have a valid Ghost system installed.

Our Ghost Immobiliser prevents thieves from beginning your engine by having an individual pin code to be entered or the presence of your smartphone using our Autowatch application installed before it can work. It functions as a PIN for a bank card, and makes it impossible to leave with your pride and joy without entering the correct pin or phone. Our Ghost Immobiliser System is integrated into the CAN Data Network so there is no wire cutting to be cut and the system is completely silent. It is unnoticeable to thieves and isn't detected by the sophisticated scan RF and code grabbing technology that other systems utilize.

The Autowatch app is used to link the Ghost to your smartphone. This allows you to enter a temporary 'Service or Valet mode which turns off the ghost for up to 30 minutes while you give your vehicle to transport or service. It is then connected to your smartphone through the Autowatch app, which allows you to enter an indefinite "Service or Valet" mode which disables the ghost for up to 30 minutes as you hand over your vehicle to us for service or transport.

With the apex of personalisation and modification utilized in modern cars, coupled with the fact that the majority of us are driving older vehicles, it's not surprising that the number of stolen vehicles has grown dramatically. Many of them are expensive and scarce vehicles which can take months to repair after being stolen so ensuring your vehicle's security is not at risk of becoming the next target is essential. A Ghost immobiliser is an affordable investment that can ensure that your vehicle is secure and can even be used to retrieve it if it does become stolen.

Does a Ghost Immobiliser operate by cutting principle?

Ghost immobilisers stop the engine of your car from starting unless a second PIN is entered with your key fob. This stops thieves from copying your car keys or hacking into your car's security system. It also could encourage them to leave your vehicle alone.

Once it is fitted the ghost immobiliser will create an individual pin code of up to 20 digits via the buttons of your vehicle (steering wheel or centre console, or door panels) which must be entered to start your car. This code sequence must be entered every time you want to drive your car as a password or PIN on a bank card. This code can easily be reset by entering a number sequence into the Ghost application.

The Autowatch Ghost II CAN has two deactivation modes for valet and services, which allow you to temporarily start your car without having an access code, such as a keyfob - while it is in the garage or parked at a valet parking service. The immobiliser can be activated when your vehicle is parked.

Unlike other security devices available and in comparison to other security devices, the Ghost is totally undetectable by modern thieves as it doesn't feature any LED indicators and works silently using your vehicles CAN data network. It's also not susceptible to the same type of circuit cuts that many other security systems are because it doesn't use radio signals.

As a result, it can be placed in a way that is discreet and hidden from view and therefore, is impossible for thieves to find and identify. It is also not identified by sophisticated scanning tools or code grabbing technologies which are often employed to identify and disable security devices.

The Ghost is a premium modern, high-tech immobiliser on the CAN bus that gives first-rate security against key cloning, relay theft, and car hacking. It's easy to install, undetectable by thieves and is not able to be deactivated with simple wire cutting. This makes it an essential for any motorist who wants to safeguard their vehicle.