• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser

Ghost is an wireless security system that guards your car against key cloning and hacking. It connects to the ECU unit via the CAN data network. It is quiet and cannot be detected by thieves.

You can only disable it by pressing a button sequence (like PIN code) you have programmed into your car with buttons on the steering wheel and center console.

Protect Your car ghost immobiliser from Theft

car immobiliser ghost theft is on the rise, Ghost Immobiliser 2 and vehicles are taken away in just seconds. It is important that car owners think about the additional security measures they can employ. Immobilisers are among the most effective and proven methods to keep your car safe. Ghost immobilisers are a great option as they are small, hidden inside the wires of your vehicle and don't emit radio frequency signals. They are therefore untraceable, and can be installed without affecting the CAN bus system of your vehicle.

Our ghost immobiliser in your area can only be disarmed with the pin code that we set up at the time of installation. This unique disarming sequence uses buttons on your steering wheel, doors or centre consoles to stop anyone from driving away with your vehicle. This stops thieves from copying your key or using a jamming/spoofing device that can disable standard car immobilisers.

Ghost immobilisers will not just stop your vehicle from being driven, but also stops it from being smashed to make parts. This is a growing issue in the UK due to the growing popularity of these types of cars. It can happen within a minute. Ghost immobilisers from TTW can be easily programmed to protect your vehicle from these kinds of attacks.

If you have our Ghost 2 immobiliser near me installed, it will stop your car being stolen from a service station or even when it is being driven by an employee whilst your vehicle is on the lift at the garage. The Ghost can be set to Service/Valet Mode which only allows you, the consumer, to enter a unique button combination.

If you'd like to find out more about our ghost immobilisers, or want to have a free estimate, call us today. We're here to help you and give you peace of mind knowing that your vehicle will be protected throughout the day.

No LED or key fobs to give away its whereabouts

Protect your vehicle from the latest type of theft by using this non-detectable immobiliser that integrates into your vehicle's CAN data network. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it makes use of buttons found in the standard factory controls that are already within your vehicle like those on the steering wheel, door panels, and centre console. This generates a secret code that needs to be entered in order to start your vehicle, making it impossible for thieves to locate.

The developers of the CAN-BUS immobiliser have also added additional security methods to guard the device from being breached or hacked. It also offers blocking CANBUS and physical immobiliser cuts, meaning that even the keys are stolen, the thief won't be able to escape with your joy and pride.

Installing the CAN-BUS in your vehicle is a simple and quick process that takes only 30 minutes. We will send a member of our team to your area so that they can set an appointment and time that is convenient for your needs. After your vehicle is fitted with a security system, you will be provided with an identification code and security codes that you can use on your phone and app. This will make it easier for you to use and give you full control over the safety of your vehicle.

The system is available to most modern vehicles, but should you own a special or antique car, please get in touch to determine if it's compatible. The cost of installation and supply of The ghost immobiliser 2 - Suggested Browsing, is APS449 and your vehicle will be added to the International Security Register if fitted by one of our approved fitters. If you have any queries, please don't hesitate to contact us with our helpful staff. We're looking forward hearing from you soon.

Easy to set up and program.

Immobilisers are fitted to the majority of modern vehicles to deter theft or hot-wiring. Contrary to physical deterrents such as steering wheel locks or wheel clamps an immobiliser is covertly integrated within your vehicle making it virtually impossible to find and defeat.

The system works by connecting directly to the CAN data network of your vehicle and prevents the vehicle from starting unless you input a unique personalised code. The unit is sealed, and so small it can be installed almost anywhere in your car with no need for additional wiring. It also doesn't emit any radio frequency signals so it cannot be detected by RF scanners or code grabbing equipment used by thieves.

Ghost utilizes the buttons on your steering wheel, door panels, and centre console of your vehicle to generate a customisable (like a pin code) disarm sequence that must be entered in order to start your vehicle. The pin code sequence can be altered if needed and is based on between four and twenty button presses. You can even place your car in Service/Valet mode to ensure that it is able to be operated but the vehicle cannot start or drive. This will ensure that your vehicle is safe when you bring it to the mechanic for service or valet parking, and that the mechanic cannot access your pin code to disable your system.

You can make use of our app to set a temporary pin for your ghost 2 immobiliser problems device if you're planning to be away from your car for a prolonged period of time, such as an extended work or holiday. You can enter your pin manually when driving the vehicle.

Our CAN bus immobiliser may also be connected to an electronic remote key fob or tracker (Brand dependent) which will take priority over the ghost system. This can be a great way to increase security in the event that your vehicle gets stolen or if you lose your keys.

If you're looking for a way to safeguard your vehicle from key cloning and hacking contact us today to discuss what we can do to help. We provide our services across the UK and also in our own installation centre in Derby.

Service/Valet Mode

Modern cars have sophisticated stop/start eco systems that require just the proper inputs to function correctly for example, battery voltage, engine temperature, external temperatures, and which electrical systems are operating. Sometimes, these issues can be a cause of concern and can often be difficult to determine if the issue is Ghost related or not. This is especially true when the vehicle has recently been repaired or valet-parked. If this is the case you can enter the ghost mode which allows the vehicle to start and drive without the requirement for a pin code. This is helpful when your car is being maintained by an independent garage or valet-parked.

To enter service mode, press the button for service 5 times. The indicator signal will flash twice when the service mode is selected. You can exit the mode at any time using a PIN code. Once you have exited service mode the Ghost immobiliser will go back to normal operation.

It is a secluded system that communicates with the vehicle's ECU on the CAN data circuit, and connecting directly to the original vehicle buttons, and not using radio frequency signals as other immobilisers. This makes it nearly impossible for any other device or hacker to bypass the system. Even jamming devices that disguise codes from the original key fob won't have any impact on this.

It is a TASSA-certified anti-theft device that complies with the most stringent standards for protection. This includes a unique marking system that links to the security registry of the world, which is a requirement for insurance companies.

The ghost immobiliser has a very compact form factor and is easily hidden in the wiring of your vehicle's factory which makes it nearly impossible for thieves to locate. It is a closed unit that is so small, it can be installed in many different locations of the vehicle, including under the dashboard or on the steering wheel.

The system uses existing buttons in your vehicle such as those on the steering wheel, door panels or centre console to allow you to create an individual and revolving sequence of disarming that can be as long as 20 presses that need to be completed to start your vehicle. It is able to be entered by anyone with your unique pin code - it is safe and secure for you and your family, friends or work colleagues to use.