• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles appear to be a small detail, but if you dislike the style or design of them, or find them difficult to use then it's time to replace them. With a little patience, you can get an entirely new handle in a short time.

Modern patio door handle repair near me handles are often equipped with cover plates which hide the screws for an attractive look. If your new handle doesn't already have them connected, you'll need to attach them separately.

Remove the old handle

Door handles are not only important for their aesthetic value to your home, but they're also vital for safety since they allow you to lock and unlock your door. However, as time passes your door handle can lose its grip, appear loose or door handle repair plate start to look old and worn out. This is a sign that it's probably time to replace it.

One of the first signs that your door handle requires replacing is if it's becoming difficult to operate. This is a serious issue as you will no longer be able to lock or unlock the door and put your family and yourself at risk.

It's also a good idea to replace the handle on your door when it's damaged or broken. A damaged or broken door handle is dangerous, particularly for elderly and children members who struggle to open it. They could become trapped. It's a good thing that it's easy to fix a broken door handle repairs handle by replacing the handle that was broken.

The majority of modern door handles are a standard size and therefore should fit any door. If you're unsure if the new door handle you're buying will work, try removing the old one and determining the holes in its housing. This will enable you to buy the right size door handle.

It is easiest to remove the door Door handle repair plate handle by taking it off from the door. This is usually done with a screw driver. However, some door handle lock repair handles have an outer cover plate that hides the mounting screws, so you'll need to pry off this to access the screws underneath. After removing the handle that was previously used, take note of how the spindle is connected. This will help you align the new handle.

You can also remove the door handle by uncrewing it from the latch mechanism. This is usually done with a screwdriver but you'll need to locate the small latch, which should be on the edge of the trim piece. Once you've removed the latch, you can unscrew the handle from the strike plate and then remove the latch away from the door's edge.

The Strike Plate

You'll have to replace your latch plate after replacing the handle. It's the part that holds the hole through which the latch for the door is inserted when the door closes. The box that the new handles arrive with will offer two different latch plates - one that is rectangular and the other a circular one (see the diagram above detailing the parts of the door handle). If your current latch plate is rectangular, swap it over to the round one, so that the latch hooks into the strike plate in a manner that makes the handle more comfortable to use.

The first step is to loosen the screw that's holding the latch plate that was previously in place. These screws are often tight and will require some force to loosen. If you are able, it could be beneficial to have a second person assist with this part.

The latch plate should easily come out of the door after the screws have been removed. If the latch plate is stuck or won't move, use a small file to scrape the edges. This can sometimes free up the plate.

Now, you can proceed to preparing the new door strike plate for installation. With the wood screws that were included with your new handles, attach the latch plate to the inside of the doorjamb. Be cautious not to tighten too much the screws, as this could damage the strike plate.

If you're not sure whether the latch plate is in its proper position, close and open the door to see whether it latches and closes properly. If it doesn't you'll have to adjust the strikeplate up or down or forward or back until the door shuts correctly.

If the door is still moving or jiggles, you might have to enlarge your latch hole on the strike plate. This is more frequent on older doors. It can be caused by wear and tear, hinges that are too small, a incorrect size of the latch or a damaged strike plate. If this is the case then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.

Take off the Latch

The latch is an angled metal piece that slides into and out of a hole on the inside of your door. When you turn the handle, it pushes this latch forward, allowing you to open the door. It also connects to an opening in the door frame to keep the door handle repair plate shut. If your door wiggles when you close it, replacing the latch could be the only thing needed to fix it.

The screws that secure the door latch are difficult to see however, you can insert a screwdriver into an insignificant hole on the trim plate and then pry the latch off. After removing the trim plate, you will be able to pull off the latch, as well as the bolts that hold it in place and the spindle that holds it.

If the latch won't release, try using the clip of a paper or tool to free it from the handle mechanism. Insert the item into the recessed latch slot and then gently twist or jiggle until you feel the that the latch and handle begin to separate. It may take this several times before the latch becomes loose enough to pull out.

Once the old latch is removed, you should be able to slide the new latch into the slot without issues. Use the new screws to attach the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot, and aligned with the screw chambers.

Before you install the new handle, make sure to measure your existing backset (the distance from the center of the big hole on the front of the door to the edge). Check that the latch size of the new handle matches the measurement.

If you're replacing the latch or handle or handle, or if the old lock cylinder is damaged, then you'll need a new one. If you're not switching locks the new lock should fit into your existing recess and also work with your current keys. Pick a latch that has rectangular cover plates to match your old handles.

Then remove the Cover Plate

You can replace your old door handles with a modern rose and lever designs to enhance the appearance of your house. You can purchase complete sets that come with matching escutcheons and privacy adaptor kits.

To replace the door handle inside, remove the cover plate (or rose), which covers the screws and mechanism. Utilize a flathead to take off the cover plate. It may have an opening on one edge or be held in place by pins.

Remove the screw that holds the handle in the interior and place it aside when the cover plate is removed. Take off the screws that hold both the inner and outer plates. You can loosen them with the help of a Philips Screwdriver. Take the inner plates and latch from the door. Set them aside.

Most doors have gaps between the door jamb and the edge of the frame that makes room for a handle, however not all do. If yours does not have a handle, you'll need to drill a new hole into the door. This is the same procedure as opening a door locked however you'll have to be extra cautious not to harm the frame or door.

After drilling the holes then you'll need to install new door knob screws. Choose the same size as the old screws to prevent getting the handle that is too loose or tight. Installing a new latch and strike rod is also necessary. These aren't included in all door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent alternative if you're in search of a top-quality interior door handle replacement set. It's a factory-fit and has received a plethora of five-star reviews from delighted customers. It's a great choice to replace worn or damaged door hardware on your Chevy.