• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Fires (Www.Graphicscience.Jp) Need to Be Hot and Clean

Wood burning fires are not only relaxing and captivating, but they're a critical aspect of our wellbeing and health. However, they must be clean and hot to function effectively.

Green, or unseasoned, wood has a high moisture content which makes it difficult to light and burn efficiently. Kiln dried, or seasoned wood has a low moisture content and is more easy to ignite and keep burning.

Efficient Combustion

A wood fire must be hot enough to push out water and reach temperatures that are above 540 degrees F ( The process of producing heat in secondary combustion begins at around 900 degrees F (in ideal conditions). This is the first step to efficiently burning fuel while reducing emissions and smoke in the flue.

It is important to keep in mind that the temperature needed for secondary combustion varies based on the type of fuel and the environmental conditions. The best method to reduce the variations is to use seasoned firewood with a moisture content below 20%.

The quantity of air supplied to a fire will also have a significant impact on the heat output and burning time. The more oxygen available, the hotter the fire will burn. A wood burning stove in conservatory fire will produce less energy and burn slower when the air supply is slowed.

To maximize burn time and efficiency To maximize the efficiency and time of burn, a wood stove or fireplace insert should be equipped with an adjustable air damper. The wide-open setting lets the fire to get all the oxygen it can get and will quickly exhaust the fuel supply. A fire that is contained within a small space is less likely to spread.

A well-dried load of firewood is also crucial to efficient wood burning. Wood that is freshly cut and isn't dried will have a high water content which makes it difficult to burn. It is recommended to use only well-seasoned firewood that has been stored outdoors for six to nine months for optimal performance.

The BTU content of wood is another factor to take into consideration. For instance, white pine or spruce wood may be cheaper than eastern hardwoods, such as black locust or shagbark, but the BTU values of the latter are much more, meaning they provide more heat for the same amount of wood. It's important to consider your heating requirements and the cost of fuel when selecting your firewood.

Clean Burning

Wood smoke can create indoor air pollution that can irritate lungs and cause respiratory distress in children and seniors. These pollutants include volatile aromatic hydrocarbons (PAHs) like benzo-a pyrene and formaldehyde and volatile organic compounds, such as benzene. Volatile tars (such as creosote) are also released when firewood is burnt.

Smoke from poorly designed wood stoves and fire places can contribute to poor air quality outside, reducing visibility and contributing photochemical smog. If used properly, however modern combustion technology in new clean-burning wood stoves and places can help reduce the emissions.

Stage 1 - Vaporization Moisture: As the log warms it releases water vapour which escapes through the chimney flue. This takes more energy than if the log was dried prior to burning. This also wastes energy that could be put to use heating your home.

In the flue, these vapors combine with carbon particles to form smoke. Smoke is a major wood burning fires contributor to particulate matter in the air and is one of the main sources of smog that we experience on clear days.

Fireplaces and wood stoves equipped with clean burn technology, if used correctly, can significantly reduce this problem by converting the wood to a charcoal state that releases less volatile gases, as well as creating the majority of the energy contained in the log from usable heat.

Avoid using damp, sour or decayed wood to light your fire. It is more difficult to burn and creates more creosote. Don't over-load your stove with thin and soft wood such as fir or pine It takes more energy to burn them, and they also produce more smoke that can cause chimney fires.

Always wait until the ashes have cooled before handling them. Dispose of or store the ashes properly. They could ignite again if exposed to water and can be hazardous in landfills. Use them in your garden or at home instead.

Storing, seasoning and properly burning your wood will help you save money and wood burning fires keep your stove running efficiently. Regularly cleaning your chimney is crucial to get rid of creosote and particulates as well as other debris that is deposited. This can also help prevent chimney fires and keep your chimney operating safely.

Safety

It's difficult to beat a warm fire in the winter cold However, precautions for safety should be taken. When fires are improperly built, burned or left unattended, hazardous fumes can be released into the house and creosote accumulations can form within the chimney. These deposits can block the flue, block airflow and cause your freestanding wood burner stove or furnace to operate less efficiently.

Never burn treated, painted, or household waste in your wood-burning stove or fireplace. They release toxic fumes such as carbon dioxide and create toxic gases. Don't use the flammable liquids to ignite fires. Kerosene, gasoline and lighter fluids can increase emissions, produce toxic creosote, and even cause chimney fires.

Keep combustible materials, such as furniture, curtains and toys away from your fireplace or stove. Do not hang clothes near or on your wood-burning fireplace. Children should be taught that the fireplace is extremely hot and shouldn't be touched.

Make sure to use only wood that has been seasoned for your stove or fireplace. Seasoned wood is dried throughout the summer to decrease the moisture content. large wood burner that is wet produces more smoke and creosote, while seasoned logs burn more cleanly and more efficiently. The wood that is seasoned appears darker, has cracks in the end grain and is hollow when tapped. Store your wood outside, neatly stacked with the top covered but allowing air circulation to them.

Be careful not to over-load your fireplace or stove, as overloaded appliances generate more smoke and less heat. Overloaded fires may also produce dangerous levels of carbon monoxide. If you own an older appliance that has an insulated metal liner, check the liner regularly for signs of wear and tear that could cause a chimney fire.

The EPA suggests reducing the amount of smoke in your home by using dry, split and well-seasoned wood and constructing a hot fire using small pieces. Avoid using soft woods, like pine, which are a great starter material to get your fire going but should not be used for more than that. These soft woods contain sap and resin which is a result of burning, and deposits excessive creosote into the chimney.

Maintenance

A warm flame in a wood burning fireplace is a great way to warm up during the cold nights of winter. However, it is important to maintain your fireplace to ensure that you receive the maximum benefit from your fire. Regular cleaning and inspection of your fireplace is the best wood burning stove way to avoid problems that may arise. This maintenance prevents excessive creosote and keeps the chimney clean to ensure maximum efficiency.

Creosote is a dark, crusty flammable material that forms in the flue when wood does not burn completely. When a lot of creosote accumulates, it can lead to chimney fires. They are the second most frequent causes of house fires across the United States. The failure of a fireplace to burn completely can be caused by a variety of factors such as dampers that are not properly sealed, cracks in the chimney's liner, and a lack or regular cleaning and removal of ash.

Incorrectly seasoned wood causes the accumulation of creosote to an excessive degree. This is due to the fact that up to half of the weight of a piece wood is water. During the fire the water boils and releases heat, but it also consumes energy during the process. The water vapor that is produced is then absorbed into creosote, or is released into the air as a part of smoke.

Soot is a different harmful product of burning wood. Soot is softer than creosote. However, it can cling to the walls of your fireplace and block air flow. It is also a fire hazard because it easily ignites when exposed to combustible gases.

You should remove the ashes and store them in a metal ash bucket, which you should keep outside on a nonflammable surface. Don't forget that the remains of the ashes are a good source of nutrients for your plants. Spread them all over your yard!

Make sure you ensure that your chimney and fireplace are inspected by a Regency Dealer certified. The technician can look for cracks, creosote levels, soot levels and a damper that is shut properly, and the condition of the catalyst. If you have a double-stage chimney that includes an air tube, you must have the catalyst removed and inspected visually for blockages. Check your user manual for directions on how to accomplish this for the particular unit you have.