• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch ghost 11 immobiliser II Immobiliser Review

Autowatch Ghost immobiliser is the next step in car security. It is inaccessible to thieves and cannot be started without a pin code or app authorization.

The system is built on the CAN Data network of your vehicle. It's silent, which means it can't be detected by common diagnostic tools or radio signals. The system does not require any electrical circuits to be cut.

What is a ghost immobiliser?

A Ghost Immobiliser is an instrument that helps to protect your car from theft by preventing the engine from starting until you enter a unique pin code. It can be utilized on a wide variety of vehicles, and unlike standard immobilisers, it doesn't require a fob or key to operate. It is also very difficult to hack or bypass and operates silently, meaning thieves need to work fast to escape without being caught.

It is protected from key cloning, signal jamming and spoofing. These are all methods that thieves have used to unlock cars with standard immobiliser systems. The device also prevents thieves from stealing keys by fishing through your letterbox or breaking into your home to steal the remote control. The device is able to stop thieves from taking your joy and pride even if they manage obtain the key. It stops the vehicle from operating until they have entered the code.

Unlike passive immobilisers that require an ignition key or fob to be activated, a ghost 2 immobiliser cost immobiliser is designed to be completely enclosed within the engine and is connected directly to the vehicle's CAN data circuit. The system generates a pin code by pressing buttons on the steering wheel or console, or on the door panels of your car. You must enter this code before your engine can start. The system can also be set to service mode to allow your vehicle to start and drive for short periods of time without the need for a PIN code, but it will be able to be able to exit service mode based on speed and time.

Because of the technology used in the process, it cannot be hacked or bypassed, even with the use of advanced equipment like codes grabbing or RF scanning devices. It is also impossible for a regular immobiliser to disable it since the device does not send the same signal that a typical vehicle immobiliser does and only works when connected directly to the CAN circuit.

Due to its advanced technology and ease of installation the ghost immobiliser is now Insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a TASSA approved Ghost Installer and can put the device in your car to help you with insurance.

How does a Ghost Immobiliser work?

Immobilisers prevent your car from starting if the wrong remote or key is used. This is achieved by sending a code to your vehicle's ECU (Engine Control Unit) If this code is sent through the wrong key or Ghost II immobiliser fob, the ECU won't recognize it and, consequently, your car won't start. This is why it's vital to ensure that your car is fitted with an immobiliser installed by an approved and reputable professional.

At MotorGuard MotorGuard is the Midlands' leading security experts and installers for vehicles. We offer an Autowatch Ghost immobiliser fitting service for a wide variety of modern vehicles so you can be sure that your prized possession is safe from thieves.

The Autowatch Ghost immobiliser is one of the world's first aftermarket CAN bus immobilisers and protects your vehicle against key-cloning, hacking and theft. It's designed to remain undetected by thieves since it doesn't use LED indicators or [Redirect-302] key fobs, and can be hidden within the wiring of your vehicle to ensure that no additional hardware is required.

Once installed, it's linked to the CAN system of your vehicle. It allows you create an exclusive disarming sequence based on your pin code. This code must be entered prior to driving the vehicle. This pin code is up to 20 presses long, to provide additional security. If you do not remember your pin code, or if the button has broken there is an emergency code that can be used. This will let your vehicle to start over again.

The fact that the Ghost immobiliser cannot be bypassed or hackable is what makes it such an effective deterrent to thieves. It also TASSA (Tracking and Aftermarket Security Systems Association) which could lower the cost of ghost immobiliser of your car insurance.

As technology continues to advance Ghost immobilisers are getting more sophisticated. For this reason, we recommend contacting an Autowatch Ghost immobiliser fitter as soon as possible to ensure that your pleasure is completely secured. If you're looking to purchase a brand new car or want to upgrade your current car, you can trust us to provide you with quality service, so you can enjoy your pride and joy for many years to come.

Is Ghost Immobiliser compatible with my car?

The Ghost is the first aftermarket CAN bus immobiliser system that provides total protection against modern-day vehicle theft. It protects against key cloning and car hacking, as well as ECU swapping. The TASSA-certified Ghost-II system also allows vehicle marking, linking to the International Security Register and enabling your insurance company to confirm that you have a Ghost system installed.

Our Ghost Immobiliser prevents theft by making it necessary for a unique pin code be entered, or your phone to have our Autowatch Application downloaded. It functions as a PIN for a bank card, and makes it impossible to leave with your joy and pride without entering the correct pin or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so there is no need for wire cutting and it works quietly. It is unnoticeable to thieves and isn't detected by the sophisticated RF scanning and code grabbing technology which other systems use.

The Autowatch app is then used to link the Ghost to your smartphone. This allows you to enter an indefinite 'Service or valet mode which turns off the ghost for up to 30 minutes as you hand over your vehicle for transportation or service. It is then connected to your smartphone via the Autowatch app, which allows you to enter an indefinite 'Service or Valet' mode which disables the ghost for up to 30 minutes as you give your vehicle to us for service or transport.

With the high level of personalisation and modification used in today's cars coupled with the fact that most of us drive older vehicles, it's no wonder that the number of stolen vehicles has risen dramatically. Many of them are expensive and scarce vehicles which can take months to replace after being stolen. Hence, making sure that your vehicle's security is not at risk of becoming the next target is paramount. A Ghost immobiliser is a reasonable investment that will ensure that your vehicle is secure and even be used to recover it in the event of it being stolen.

Does a Ghost Immobiliser operate on cut principle?

Ghost immobilisers work by blocking the engine of your vehicle from starting unless a second PIN is entered alongside your key fob. This prevents thieves from copying keys to your car or hacking into your car's computer system. It can also encourage them to leave the vehicle alone.

Once fitted the ghost immobiliser will create a unique pin code that can be as long as 20 digits through the buttons on your vehicle (steering wheel or centre console, or door panels) which must be entered to start your car. The code sequence needs to be entered every time you drive your car, like a PIN or password on a credit card. This code can be reset by entering a series of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN has two deactivation modes for valet services and valet, which allows you to temporarily start your car ghost immobiliser with no access code - similar to a keyfob - while it is in the garage or parked at valet parking. The immobiliser can be activated when your vehicle is placed in a garage.

The Ghost is unlike other security devices available on the market. It doesn't have any LED indicators, and it works completely silently using the CAN data network of your vehicle. It's also not vulnerable to the same cuts in circuits that other security devices are since it doesn't utilize radio signals.

It can also be hidden and discretely installed, making it impossible for thieves to detect and locate. It is also unnoticeable by sophisticated scanning tools and technology that grabs codes, which are often employed to identify or disable security devices.

The Ghost is an advanced, high-quality CAN bus immobiliser. It provides excellent protection against key cloning and relay theft, as in addition to car hacking. It is simple to install and undetectable by thieves. It is not able to be deactivated by simple wire cutting. This makes it an essential item for anyone who wants to protect their vehicle.