• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your pet leave and come at their own pace without needing to let him in or out. They also can help to keep your cat from having to go to the bathroom in the house.

It is much easier to put a cat flap on a Upvc panel than on a glass one however, you'll need some skills and the appropriate tools.

Take a look at the Door

Fitting a cat flap in a door can be tricky however, as long as you choose the right type of cat flap, take your time and follow the directions provided, it should not prove to be too much trouble. We will be showing you how much to install a cat flap to mark out the shape, then use a jigsaw to cut out the door's area and then finish the job by fixing the cat flap to the door. This will ensure that the flap stays in place and shields the door from wind and rain damaging the door.

The first thing you need to do is determine the width of your pet in order to get a precise measurement of what size of cat flap you'll require. This will allow you to choose a cat flap that is large enough for your pet to walk into the home and exit without needing to open the door each time.

If your kit comes with an illustration of where to drill, then put it on the door, and then draw around it. If your door has a sill or moulding at the bottom, make sure you leave enough space between your cat and the moulding or sill.

Use a set square to check that you're cutting correctly and to ensure the hole is a good rectangle shape. Once you are satisfied with this, you can begin removing the rest of the door material. If you own a square that you have cut, use it to check whether you're cutting in the right way and also to ensure that the hole is a proper rectangle. Once you are happy with this you can start to remove the rest of the door material.

Draw a Line

The cat flap is a great method to let your pet in and out without worrying about them being a nuisance to a visitor, or leaving unwelcome gifts in the house. It also stops draughts and helps keep your home's temperature stable. However, fitting an animal flap on your door can seem like an overwhelming task for those who haven't done it before, leading many people to seek out an expert joiner or carpenter to do the job. While this is definitely an option, it's possible to do the job yourself if you own the right tools and follow the instructions with care.

Although this is much simpler to accomplish when using a timber door it is still possible to do this in uPVC doors - although you must be cautious not to damage the doors as this will invalidate the warranty. The first step is to examine the door's measurements to make sure it will accommodate the new cat-flap. If you have a standard uPVC panel, this should be easy. However when your door is composite or another type of door, you might require more care.

The next step is to determine the belly height of your cat. This is the height from the floor to the underside of the cat's stomach and you'll need find a place in the door where this measurement is within the range that your cat can comfortably pass through. Once you've figured out the measurements, you'll be required to mark the space using a spirit level and a pencil so you are sure that the opening will fit your cat.

After you've marked the area, it's time to cut the hole. You will require the jigsaw, and it is crucial to take your time to ensure that the cuts are clean and smooth instead of uneven and rough, as it could cause damage to your door. Be sure to wear safety glasses and a dust-proof mask whenever using the jigsaw, as breathing in the dust could be harmful to your health. Once you've finished cutting the hole, you will need sandpaper to smooth the edges so that the cat flap cover for winter flap can be easily fitted into place.

Make a hole

Installing a cat flap into an existing door panel or double glazing sealed unit can be quite difficult. If you're not experienced in DIY, it is best to hire an expert to do the job for you. A botched job may not only be unsightly but it could also be an enigma for security as well as allowing cold air to get in when the cat is outside and hot air to escape once inside.

The hole's location should be marked on the door using the help of a pencil and fitting cat flap in Upvc door panel a spirit level. This will ensure it is correctly positioned and runs flush with the rest of the door. Make sure you have sandpaper on hand to smooth out any rough edges.

Wear any safety gear you'll need to use the power tool. If you're worried about noise, you can get a cordless jigsaw which is quieter and easier.

You should only remove the material required to make the flap. It is essential to leave a bit of material for the wall thickness of the cat flap. However cutting off too much material can cause issues or even damage to the door frame.

A upvc door may have a metal frame or panel within it that could interfere with the microchip cat flap, and if this is the case you'll need to cut an oversize hole so that the metal does not come into contact with the the cat flap, if this is done it is essential to fill in the gap and render it watertight.

If you are fitting cat flap in upvc door panel - Postheaven.net, a cat flap into a upvc door or double glazed window cat flap with a metal frame, you'll need to speak to a professional who can supply you with a new pane of glass that already has the hole for the cat flap premade in it. This is less expensive than trying to install a cat flap in an existing pane that wasn't designed specifically for this purpose.

Install the Flap

cat flap fitting flaps allow your pet the freedom to go and come whenever they want and let them relax in the home whenever they like. If you have an uPVC front door, it can be hard to install the cat flap. This is especially true when you don't have glass panels which can be cut. If you're able to purchase and install a new half-glazed upvc door panel with cat flap fitted panel then it is possible to add a cat flap to the doors. It's not as easy as simply cutting a hole in the door, however there are a few things you'll need to take care of first to ensure it's secure.

A composite door panel is typically made up of an extremely thin plastic outer skin that is bonded to a soft, insulating polystyrene core. It is crucial to be cautious when cutting the material. This type of door typically comes with a template drawing which you can use as a guide to cut the hole in your door.

After you have marked out the hole in your front door, it is time to install the cat flap. You can buy and fit various models that range from simple button operated ones to microchip activated units that allow only your pet. Whatever type of cat flaps you choose, it's vital that your cat is able to use the flap comfortably without getting stuck outside in bad weather.

It's a good idea choose circular fittings rather than one that is square, since circles are more securely cut into the door glass. This is because square holes are more likely to break the glass when they are drilled. This is also a safer option, as you won't have to drill into the toughened glass, which could break and hurt your pet or your family members. This is especially important if you have a young or elderly person in your home who may be hurt by shards of glass.