• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next-generation in car security. It is inaccessible to thieves and impossible for them to open the vehicle without a unique pin code.

The system is built on the CAN Data network, and is completely silent and therefore cannot be detected by common thieves radio signals or diagnostic tools. The system doesn't require any electrical circuits to be cut.

What is a ghost immobiliser review Immobiliser?

A Ghost Immobiliser is a gadget that helps to protect your car against theft, by blocking the engine from starting until you enter a specific pin code. It can be used for a wide range of vehicles. And, unlike the standard vehicle immobiliser it doesn't require a fob or key to operate. It is also extremely difficult to hack or bypass, and it operates in a quiet manner. This means that thieves must be quick to flee without being detected.

It is protected from signal jamming, spoofing and key cloning - all methods that thieves have employed to unlock vehicles equipped with standard immobilisers. The device deters thieves from stealing keys through a search in your letterbox, or breaking into your home and taking the remote control. It will also stop them from driving away your pride and joy in the event that they are able to steal the key, as it prevents them from starting your vehicle until they have entered an initial code.

Ghost immobilisers, unlike passive immobilisers that require a fob or key to be press to activate it, is designed to be completely sealed inside the engine. It is connected directly to the data circuit in the CAN of the vehicle. The system generates the pin code by pressing buttons on the steering wheel or console, Ghost Immobiliser And Tracker or on the door panels of your vehicle. You will have to enter this code before the engine is able to begin. The system can also be set to service mode to allow your vehicle to start and drive for a short period of time without the need for a pin code, but it will be able to exit service mode based on the speed and duration.

It is not possible to hack or bypass the system even with the most advanced equipment, such as codes grabbing devices. It is also impossible for a regular immobiliser to be disabled because the device doesn't send the same signal that a typical vehicle immobiliser and operates when connected directly to the circuit CAN.

TASSA (Tracking & Aftermarket Security System Association) has approved Ghost's immobiliser as an insurance approved product due to its cutting-edge technology and ease-of-installation. We are a TASSA approved Ghost Installer who can install the device in your car to help you with insurance.

What is the process of a Ghost Immobiliser work?

In simple terms, an immobiliser works by stopping your vehicle from starting when the wrong fob or key is used. This is achieved by sending a code to the vehicle's ECU (Engine Control Unit) - when this is sent through the wrong fob or key the ECU will not recognise it, and consequently the car ghost immobiliser won't start. This is why it's vital to ensure that your car is equipped with an immobiliser installed by an established and trusted specialist.

At MotorGuard we are the Midlands leading security experts and installers for vehicles. We provide Autowatch Ghost immobilisers for a variety of modern vehicles. You can be confident that your car's security will be safe from potential thieves.

The Autowatch Ghost is the first aftermarket CAN-bus immobiliser system in the world. It shields your vehicle from key-cloning and hacking, as well as theft. It is designed to not be detected by car burglars since it does not have LED indicators or key fobs. It can also be hidden within your vehicle's wiring so that it doesn't require any additional hardware.

Once installed, it's connected to the CAN system of your vehicle and allows you to create a unique disarming sequence with your pin code. This code must be entered prior to driving the vehicle. The pin code can be up to 20 presses long, which provides security. If you forget your pin code or when the button is damaged there is a secure emergency code that you can use. This will let your vehicle to restart.

The fact that the Ghost immobiliser is not able to be bypassed or hackable is what makes it an effective deterrent against thieves. It is also TASSA (Tracking and Aftermarket Security Systems Association) which could lower the cost of car insurance.

As technology continues to improve, ghost immobilisers are becoming more sophisticated. In this regard, we suggest contacting an Autowatch ghost immobiliser tracker immobiliser installer as soon as possible to ensure your pleasure is completely secured. If you're purchasing a new vehicle, or looking to upgrade your current car, you can trust us to provide you with quality service, so you can take pleasure in your pride and joy for years to be.

Is the Ghost Immobiliser compatible for my car?

The Ghost is the world's first aftermarket CAN bus immobiliser system to provide total protection against modern-day vehicle theft. It safeguards against key hacking, cloning, ECU swapping & much more. The TASSA-verified Ghost-II system also allows marking of your vehicle, linking to the International Security Register and enabling your insurance company to confirm that you have an Ghost system in place.

Our Ghost Immobiliser prevents thieves from starting your engine by needing an unique pin code sequence to be entered or the presence of your phone with our Autowatch application installed before it can be used. It functions like a pin code for bank cards, making it impossible for thieves to drive away with your pride and Joy without logging in the correct pin or phone. Our Ghost Immobiliser System is integrated into the CAN Data Network so there are no wire cutting required and the system works silently. It is inaccessible to thieves and isn't detected by the sophisticated scanners and RF technology that other systems utilize.

After the Ghost is installed by our trained fitters it's completely hidden and undetectable to the naked eye. it makes use of the buttons on your vehicle, such as those on the steering wheel, door panels, and centre console to create a unique pin code that has to be entered before the engine can start, much like a password for your bank account. It is then connected to your smartphone through the Autowatch app, which allows you to switch into a temporary "Service or Valet" mode which disables ghost immobiliser and tracker (other) for up 30 minutes while you hand over your vehicle for transportation or for service.

It's not a surprise that the number stolen vehicles has risen dramatically. This is because of the extensive customization and personalisation that is employed in modern vehicles as well as the fact that a lot of us have older cars. It can take months to replace these costly and expensive vehicles when they are stolen. Therefore it is crucial to safeguard your car from becoming the next target. Ghost immobilisers are a reasonable investment that can help keep your vehicle secure and could even help recover the vehicle if it is stolen.

Does a Ghost Immobiliser work on the cut principle?

Ghost immobilisers prevent your vehicle's engine from starting unless a second PIN is entered alongside your key fob. This stops thieves from copying keys to your car or hacking into your car's security system. It also could encourage them to leave your vehicle completely.

Once it is fitted the ghost immobiliser will create an individual pin code that can be as long as 20 digits through the buttons of your vehicle (steering wheel, centre console or door panels) which you must enter to start your vehicle. This code sequence must be entered every time you want to drive your car as a PIN or password on a bank card. This code can be reset by entering a sequence of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN has two deactivation options for valet services and valet, which allows you to temporarily start your car with no access code - like a keyfob - while it is in the garage or at a valet parking service. The immobiliser will be activated when your vehicle is placed in a garage.

In contrast to other security systems available, the Ghost is completely undetectable to modern thieves as it doesn't have any LED indicators and works silently using your vehicles CAN data network. It's also not vulnerable to the same circuit cuts that other security systems are since it doesn't utilize radio signals.

As a result, it is able to be installed in a way that is discrete and invisible and therefore is difficult for thieves to find and identify. It is also unnoticeable by advanced scanning tools or code grabbing technologies that are commonly employed to identify or disable security devices.

The Ghost is a high-quality modern, high-tech immobiliser on the CAN bus that gives first-rate security against key cloning, relay theft, and car hacking. It is simple to install and undetectable by thieves. It cannot be disarmed by simple wire cutting. This makes it a must for any driver who wishes to safeguard their vehicle.