• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

An in wall fireplace provides a sleek and wooden fireplaces polished look without the expense of a mantle. It is among the easiest electric fireplaces to put in.

There are many aspects to take into consideration prior to purchasing your in wall fireplace. Follow these guidelines to get the most of your purchase.

Height

It may seem like a simple issue however, determining the height of your fireplace is among the most important decisions you'll make. The size of your fireplace's height can affect everything, from how it fits in a room to its visibility. Your fireplace could look strange in the event that it is set too high. It will also detract from its attractiveness. On the other hand, having your fireplace too low could make it appear unattractive in the wall space.

Electric fireplaces can be mounted at various levels. For instance, most people prefer to put their fireplaces at eye level from a seated position. This requires a height between 40-42 inches. Some people place their fireplaces under their TVs, which can be visually appealing.

The height of your fireplace depends on several factors such as the dimensions and length of the wall you intend to put it on. The bigger the room is, the bigger it will be. This could mean that you are able to fit a larger fireplace in it. The length of the wall is also important since a wall that is larger can support a fireplace that is larger.

The way you intend to make use of your fireplace is an important factor. If you plan to use it solely to decorate your home, it is recommended to choose a lower height. If you plan to use it to heat your home it is necessary to ensure that the fireplace is strong and tall enough to meet the safety standards.

It is important to choose the appropriate height for your fireplace, so that it can fit into your decor and be simple to clean or fill. If you're not sure of the best height to choose you can always contact an expert fireplace installer for assistance. They'll be able to determine the best height for your fireplace in light of their experience and the specifics of your home.

Depth

The depth of a fireplace is crucial to consider if you intend to put it in a recessed place. If you are planning to cut into the wall, make sure that you have enough space to accommodate your fireplace's inner design (the space for the smoke shelf above the firebox as well as the flue that extends upwards from the roof). Also, think about the space you'll have for the surround and whether you would like a mantle.

Many of the newer electric fireplaces have a depth that is nearly concealed, creating the appearance of a "built-in" look. This type of wall fireplace that is electric is best demonstrated by the Panorama BI Deep series. The model has an 5.8-inch depth that allows the viewer to see the flames and ember bed, not the frame of the fireplace. The media package includes driftwood logs with natural colors white pebbles, or clear glass crystals that add a luster to the embers and reflect the flames.

Gas wall-mounted Wooden Fireplaces also come in both deep and shallow models. But, when deciding the depth of your fireplace, it is important to keep in mind that these fireplaces function as a supplemental heat source and must be properly vented by a skilled professional. The length of the vent pipe, the dimensions of the flue, and the distance between the stove and the vent are all elements that need to be taken into consideration when determining the depth of a gas fireplace.

It is important to read and carefully follow the instructions provided by the manufacturer when mounting your fireplace. In most cases, a professional installer is advised. Also, it is always recommended to have an additional person in the event of installing gas fireplaces.

A fireplace built into the wall of your home is an great way to boost its value and add some ambiance to your living spaces. It also can help reduce your heating bills. Additionally, it's an excellent option if you aren't able to install a traditional fireplace in your home because of space limitations or due to the location of an existing chimney.

Surface Mount

Surface mounts are a great option if you don't want to or aren't able to cut into the wall to install an electric fireplace. They also provide a sleek, built-in look. Certain models, such as the Allusion line of electric fireplaces, can be positioned partially recessed into walls without compromising the output of heat.

To start the installation process, determine the location where you would like your fireplace suite to be installed and make a mark with a pencil on the wall where the bracket will be installed. Use a stud finder to find the studs in the area. Make sure every mounting bracket is placed in front of one or more studs for stability. If a stud can't be reached or is not suitable for your fireplace, you could use drywall anchors as a support.

Once you have identified the location of the mounting brackets on the wall, use a power drill to install them and ensure that they are aligned correctly with the studs. If possible, connect each bracket to a stud to ensure strength and stability, however you can also use plastic anchors when needed. Once the mounting brackets are installed move the fireplace and hang it from the bracket. Once the fireplace is positioned ensure that it is level.

Before you proceed with the installation, connect your fireplace and ensure whether all features are operating correctly - turn on the flame and start the flames. play around with the heat, ember bed lights and so on. When you are satisfied with the results it is time to install the floating mantel.

Depending on your fireplace's model It is possible to connect the wire connection to the appliance connector located at the bottom of the mantel, or if it has hooks or slots, connect them to the slots on the brackets for mounting. After you've completed this step you should consult your fireplace's user manual for instructions on how to remove the front glass panel from the opening and replace it.

After you've removed the front panel of your fireplace and placed it into its opening, follow the manual's specifications to finish the install by replacing the glass front and adjusting the height as required. If your fireplace has ember bed media, spread it out across the top of the grate to give it a an appearance that is more natural and then secure it in place by using the screws that come with it.

Plug-In

Contrary to traditional wood fireplace-burning fireplaces electric fireplaces don't require chimneys or vents. They're plugged into a standard outlet that can provide supplemental heating for rooms that are up to 400 square feet. They also have a variety of flame and heat settings so that you can alter your ambience. Some models have LED lighting effects that emphasize the flame and embers. Other models include an upper grille grate that hides manual controls but easily pops open to reveal buttons to set the desired setting.

Electric fireplaces that plug in can be hung directly on walls or recessed into the wall for a built-in appearance. They are typically more straightforward to install than mantel fireplaces. Some models include a pedestal to allow you to put the fireplace on flat surfaces, such as a buffet or dresser. A remote control, mounting hardware and log set are included. Depending on the model, these electric fireplaces could include heat and flame options that can be turned off for all-year-round comfort.

Some models have adjustable privacy glass that you can instantly change from completely see-through to partially transparent. This makes these models popular for walls that divide common entertainment spaces like dining and living areas. They can even be used in bedrooms where the addition of the fireplace can be a cost-effective method to take the chill off the space without sacrificing privacy.

While plug-in electric fireplaces don't require hardwiring as built-in models, they must be positioned on an area that is at least free of studs and able to support the weight of the fireplace. Some models include an accessory kit to make this process simpler with a pre-wired power cord and a bracket for mounting. This kit can be used for either construction of drywall or concrete.

When deciding on a place for your wall-mounted electric fireplace, ensure that it's near an electrical outlet. Plug-in electric fire places can be connected to outlets that are on the same circuit as the electric fireplace, or into a dedicated outlet. It is best to choose a different circuit, so that there are no other appliances in your home operate on the same voltage. This could cause a trip to your breakers.