• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to increase the security of your home without compromising aesthetics, go for sash lock door handles. They can be used in conjunction with mortice locks or sash windows upvc locks and can be combined with an nigh latch to provide extra locking for internal door.

The handles consist of a lever/handle on the backplate. They are usually used with a three or five lever mortice lock. They can be combined with a tube latch.

Lever Lock Handles

There are many different types of lever door handles available to match any home decor. Rustic lever handles work well with a farmhouse or ranch-style decoration and are also very popular in modern homes. Classic lever handles can be round or spherical and are simple to grasp. They are simple and affordable and can be utilized in any style of decor. Choose polished or satin nickel chrome handles for an elegant style. These finishes are sturdy and easy to clean. Other options include antique bronze and polished brass. A majority of levers have a unique design, such as small amber worm eyes or long-horned crystals. Some levers have pins, stars or other shape molded in the bottom.

To replace the lever lock door handles, you must have the right screwdriver, or a tool for disassembling the handles. Depending on the design and model you may need to employ an awl, or nail to remove the lever handle. Some lever handles come with tiny holes or a notch at the base of the handle that can be used to pull them open.

Once you have the correct tool, follow the manufacturer's instructions to take off your old handles. Examine the spindle of your new lever. Existing doors are often morticed (cut into the door) for previous latches or locks and must be adapted to a particular spindle size. The majority of lever handle manufacturers use the standard door handle spindle.

If you are replacing a sash lock door handle, the old handle must be removed, and the tubular latch bolt which is in the door, must be disconnected from the strike plate inside the door frame. The latch bolt will need to be put through a hole in the door's frame and then connected to the strike plate.

It is essential to keep in mind that when installing new lever handles, all handles that comply with the ADA (Americans with Disabilities Act), are designed to operate by hand. The user should not be required to hold their hands tightly or turn their wrists. To meet ADA standards of compliance, the lever door handle should not be operated using only the thumb and finger or even the entire hand.

Sash Lock Handles

The primary function of sash lock door handles is to pull the sashes moving together to form a seal. This helps to keep the temperature inside the house and also prevents drafts. They are also great for doors that do not require the security of the keyed locking system.

Mortice sashlocks are locks that combine the latch and deadbolt into one case. They are inserted to the door's material. They can be used with door handles and come in a variety of options.

The lever handles for locking is operated by a lever with an opening cut into the backplate below. This allows a key inserted into the mortice sash secondary glazing to operate it. This lock is usually used on doors that are not locked such as those in living rooms and dining rooms. However it can also be utilized with a tubular lock to create the security of the door.

These are designed to hold the sash in place at several points, and include hooks that fit inside the keeper. They are available in a variety of styles and designs that fit various window types like hinged or sliding casement windows. Some are made of cast aluminum while others are made of brass or iron. These are available in different colors to match other components of the door furniture such as escutcheons that protect the keyhole.

3 lever sash lock handles are suitable for doors that are internal but not for external doors, because they lack the security level that insurance companies require. They also are less resistant to forced entry than their five lever counterparts, which makes them more vulnerable.

A door sash that has five levers is the ideal option for doors that are external. It offers higher levels resistance to forced entry and is more difficult to pick or bypass. These locks are a new design that has been tested and approved to ensure compliance with strict building regulations for fire, disability and security.

The first step in replacing the handle on a sash lock is to remove the old fastener by removing the screws from each end. Make sure you have a screwdriver on hand and carefully separating the parts to prevent damage. Mark with a pencil the location of the screw holes, so you can align the new fastener correctly when it comes to fitting. Get rid of any dust or paint particles, and then screw in the new fastener. Test the handle to make sure it functions properly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism that is located inside a door, and is operated by turning the handle. It is designed to close the door, but it does not secure the door as mortice locks do. These are most often used on internal doors where no locking is required. They can be fitted with lever handles or knobs.

There are many sizes of tubular latch available. They range from basic to high-end architectural quality. The size of the door is contingent on the purpose for which it is used and whether it is equipped with an lock. For example, a bathroom door may require an open and thumbturn mechanism in the event in an emergency, therefore you'll require an latch that can be locked.

The selection of the correct latch depends on the backset size of your door. You should select the latch with a backset measurement that is equal to the distance between the edge and the center of the door's hole to accommodate the handle rose or knob. This will ensure that the door handle and knobs will operate the latch smoothly.

If you are installing a knob or lever that has a spring or not spring, it is essential to choose a heavy-duty tubular latch. It should come with a double-sprung follower. This will ensure a smooth latch action and will prevent it from becoming sluggish or unresponsive after regular use.

Once you've selected the correct latch to meet your needs the next step is to fit it to the door. The first step is to make sure that the latch is level to the top of the door frame or casing. Then mark the location of the plate and drill holes. Utilizing a countersink drill bit will aid in creating the proper recess for it to fit comfortably into.

Once the latch is in place Once it is in place, you can screw it onto the door. Before installing your locks or handles it is crucial to check that the latch functions correctly. To do this you need to open and close the door a few times. If it's not functioning properly, try lubricating the door using WD40. Then re-try it. If you are still experiencing problems then it might be necessary to talk to a locksmith or professional installer.

Keyhole Handles

Keyhole handles work with a tubular latch installed inside the door. This latch is used to open and close the door. The handle engages the latch when pushed down and then releases it when pulled up. These kinds of handles are typically employed on doors that are internal such as living rooms or doors for dining rooms, but they can also be used on front doors if they are paired with the nightlatch.

Door knobs are modern handles that incorporate an sprung lever/handle, a round or square fixing stem and a thumb-turn or escutcheon. They come in a variety of designs and finishes that will fit the doors of your home. They can be used with Euro cylinder locks or multipoint locking systems to provide additional security to the door. This is accomplished by putting several points of locking along the door's height. It requires doors with handles that are compatible and have the correct lock centre dimension to fit the barrel of the cylinder.

Keyhole escutcheons are a cover for the door's keyhole to hide it from view and provide an elegant finish to the handle. They are available in the screw or pop on design and come in various finishes to match the door handle. A recessed escutcheon that is attached to the outside of the door to cover the keyhole further and give it a more contemporary appearance, can also be utilized.

Most of the handles discussed above are designed to work with either a mortice or sash lock mechanism, however certain handles are compatible with Euro Cylinder locks too. They are designed for upvc sliding sash windows doors and require door handles that have a Euro cutout for the cylinder and appropriate screw holes in the backplate to accommodate the euro cylinder. These handles also require an Euro Cylinder escutcheon, or a standard escutcheon depending on the purpose.

If you decide to use mortice lock, sash lock or tubular latch for your door, it's important to understand the different features of each and the requirements they have to work with other components of your uPVC door system. You'll need to think about the door's thickness and door hinges, as well as frame reinforcements, as well as the door handle backplate size, the dimensions of the lock centre and the screw centres for the cylinder.