• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next-generation in vehicle security. It is inaccessible to thieves and makes it impossible for them to open the car without a specific pin code.

The system is built on your vehicle's CAN Data network, and is completely silent and therefore cannot be identified by common thieves' radio signals or diagnostic tools. It also does not require any circuit cuts to be made before installing.

What is a ghost immobiliser?

A Ghost Immobiliser is an instrument that helps to protect your vehicle from theft by stopping the engine from running until you enter a unique pin code. It can be utilized in a range of vehicles, and unlike traditional immobilisers, [Redirect-301] this one does not require a key or fob to operate. It is also difficult to bypass or hack and operates silently, meaning that thieves would have to work quickly in order to get away without being noticed.

It is protected from signal jamming, spoofing and key cloning - all techniques thieves have used to unlock cars equipped with standard immobilisers. The device also stops thieves from stealing keys by digging through your mailbox or gaining access into your home to take the remote control. It could even prevent them from taking away your pride and joy if they have managed to gain access to the key because it stops them from starting the vehicle unless they enter an initial code.

A ghost immobiliser, unlike passive immobilisers that require a fob or key to be in use to activate it, is designed to be fully sealed within the engine. It is connected directly to the data circuits of the CAN in the vehicle. It makes use of buttons on the steering wheel and centre console as well as door panels to create a unique pin code which you'll need to enter before the engine starts. The system can be put into the service mode, which allows your vehicle to start and drive for short periods of time without needing the use of a PIN. However the service mode will end depending on speed and time.

It is impossible to hack or evade the system, even using high-tech equipment like codes grabbing devices. It is also impossible for a normal immobiliser to disable it because it doesn't transmit the same signal that a typical vehicle immobiliser does, and only is functional when connected directly to the circuit CAN.

TASSA (Tracking & Aftermarket Security System Association) has now endorsed Ghost's immobiliser as an insurance-approved product due to its cutting-edge technology and ease-of-installation. We are a TASSA approved Ghost Installer who can install the device in your car to help you with insurance.

How does the Ghost Immobiliser Work?

Immobilisers prevent your car from starting if the wrong key or remote is used. It does this by sending a code from the wrong key or fob to the ECU (Engine Control Unit). The ECU won't recognize it and your car will not start. This is the reason it's essential to ensure your car is fitted with an immobiliser installed by an established and trusted specialist.

At MotorGuard MotorGuard is the Midlands leading vehicle security experts and installers. We offer Autowatch Ghost immobilisers for many modern vehicles. You can rest assured that your pride and joy will be safe from potential thieves.

The Autowatch Ghost is the first aftermarket CAN bus immobiliser system in the world. It safeguards your vehicle from key cloning and hacking, as well as theft. It's designed to be undetectable by car thieves as it doesn't use LED indicators or key-fobs, and can be hidden in the wiring of your vehicle to ensure that no additional hardware is required.

Once installed, it is linked to the CAN system of your vehicle. It lets you create an unique disarming sequence using your pin code. This must be entered before driving the vehicle. This pin code can be as long as 20 presses long to provide security. If you forget your pin code or if the button is broken, there is a secure emergency code that you can use. This will allow your vehicle to restart.

It is because the Ghost immobiliser can't be bypassed or hacked, that it is an effective deterrent for thieves. It also TASSA (Tracking and Aftermarket Security Systems Association), which could reduce the cost of car Immobiliser ghost insurance.

ghost 2 immobiliser reviews immobilisers continue to evolve as technology improves. We suggest that you speak with an Autowatch Ghost fitter as quickly as possible to protect your pride and joy. If you're looking to purchase a brand new car, or are looking to upgrade your vehicle, you can rely on us to provide you with a quality service, so you can enjoy your pride and joy for many years to come.

Is Ghost Immobiliser compatible my car stolen with ghost immobiliser?

The Ghost is the first aftermarket CAN bus immobiliser system to provide total protection against modern-day vehicle theft. It guards against key hacking, cloning, ECU swapping, and more. The TASSA-certified Ghost-II system also offers marking of your vehicle, linking to the International Security Register and enabling your insurer to verify that you have an Ghost system in place.

Our Ghost Immobiliser prevents thieves from starting your engine by requiring an unique pin code sequence to be entered or the presence of your smartphone using our Autowatch application installed before it can work. It works like a PIN for a credit card and makes it impossible to drive away with your pride and joy without entering the correct pin or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so there is no need for wire cutting and it runs quietly. It is undetectable to thieves and cannot be detected by sophisticated RF scanning or code grabbing techniques that other systems employ.

Once the Ghost is installed by our skilled fitters, it's completely hidden and undetectable to the naked eye. it makes use of the buttons on your vehicle, for instance on the steering wheel, door panels & the centre console to generate an individual pin code sequence that must be entered before the engine can start, much like a password for the bank account. This is then connected to your smartphone through the Autowatch app, allowing you to go into the temporary "Service or Valet" mode that disables ghost for up 30 minutes while you surrender your car for service or transportation.

With the apex of personalisation and eknr.com modification utilized in modern cars, coupled with the fact that a majority of us are driving older cars, it's no surprise that the amount of stolen vehicles has risen dramatically. It can take a long time to replace these expensive and rare vehicles when they are taken. Therefore it is crucial to protect your prized possessions from becoming the next victim. A Ghost immobiliser is an affordable investment that can ensure your vehicle stays safe and can even be used to retrieve it if it does become stolen.

Does a Ghost Immobiliser work on the cut principle?

Ghost immobilisers work by blocking your vehicle's engine from starting unless a second PIN is entered alongside your key fob. This prevents thieves from cloning your keys to steal into your car's system. This can encourage them to leave your car alone.

Once installed the ghost immobiliser will generate an unique pin code of up to 20 digits using the buttons on your vehicle (steering wheel or centre console, or door panels) that must be entered to start your car immobiliser ghost. The code sequence has to be entered each time you drive your car, just as a PIN or password on credit card. The code can be reset by entering a sequence of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN has two deactivation options for valet and services, which allows you to temporarily start your car with no access code - similar to keys fobs - while it is in the garage or parked at a valet parking service. The immobiliser will reactivate automatically when the car is placed in a garage.

In contrast to other security systems on the market, the Ghost is completely undetectable to modern thieves since it doesn't feature any LED indicators, and it operates in a silent manner using your vehicle's CAN data network. It is also not prone to the same kinds of circuit cuts that are found in other security gadgets, since it does not use radio waves.

It can also be concealed and discreetly installed, making it virtually impossible for thieves to detect and locate. It's also not able to be recognized by sophisticated scanning tools or code grabbing technology that are commonly used to locate and disable security devices.

The Ghost is a top-quality, state-of-the-art CAN bus immobiliser that provides first-rate protection against key cloning, relay theft, and car hacking. It's simple to set up, undetectable by thieves and is not able to be deactivated with simple wire cutting. This makes it a must for any driver who wants to safeguard their vehicle.