• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you want to enhance the security of your home without sacrificing aesthetics choose sash lock door handles. They can be used with mortice latches or sash lock. They can be paired with a night latch to add locking for doors inside.

The handles are made up of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can also be paired with tubular latches.

Lever Lock Handles

There are many different types of lever door handles available to complement any decor. Rustic lever handles work well with ranch or farmhouse style decor and are also very popular in modern homes. Classic lever handles are round or spherical and are easy to hold. They are simple and affordable, and can be used in any decor. Choose satin nickel or polished chrome handles for a classy appearance. These finishes are durable and easy to clean. Other options include antique bronze and polished brass. A majority of levers have a unique design, such as tiny amber worm eyes or long-horned crystals. Some levers have a star, pin or some other shape that is molded into the bottom.

To replace the lever lock door handles, you require the appropriate screwdriver, or tool to disassemble the handles. Based on the design and model you may have to use an awl or nail to remove the lever handle. Some lever handles feature an apex or notch on the opposite side of the base that can be used to open it.

Once you have the correct tool, follow the manufacturer's instructions to remove the handles you have already installed. Make sure the spindle is in place on the new lever. Existing doors are often morticed (cut into the door) to accommodate latches from the past or locks, and must be adapted to a particular spindle size. Most lever handle manufacturers have the same standard door handle spindle size.

If you are replacing a sash lock door handle, the old handle must be removed, and the tubular latch bolt which is within the door, needs to be removed from the strike plate inside the door frame. The next step is to drill a hole into the door frame, insert the latch bolt into it, and connect it to the strike plate within the door frame.

When installing a new lever door handle it is important to note that all ADA (Americans with Disabilities Act) approved handles are designed to be operated with a hand and should not require the user to grip tightly or twist their wrists. To meet ADA standards of compliance, the lever door handle must not be operated using only the thumb and finger, or even the entire hand.

mock sash upvc windows Lock Handles

The primary function of door handles for sash locks is to pull the sashes moving together to form a seal. This stops drafts from entering the room and helps maintain indoor temperatures, which can help save energy costs throughout the year. They are perfect for doors that do not call for a keyed lock system.

Sash locks are often referred to as mortice sashlocks and combine the latch and dead bolt into a single case that is inserted in the material of a door. They are used in conjunction with a pair of door handles and there are a myriad of choices to suit your home.

The lever locks are operated by a lever that has a hole cut in the backplate below. This permits a key to be inserted into the mortice sash to operate the lever. It is most often used on doors that are not locked such as living rooms and dining areas however it is also possible to pair it with a tubular lock on the inside of a door to make it more secure.

These are designed to keep the sash together at multiple points, and have hooks that fit inside the keeper. They are available in a variety of styles and designs that can be fitted into various types of windows like upvc sliding sash windows or hinged casement windows. Some are made of cast aluminum while others are made of brass or iron. These are available in different finishes to match the other elements of door furniture like escutcheons, which protect the keyhole.

The 3 lever secondary glazing sash window locks only suitable for internal doors. They don't provide the security level required by insurance companies. They also have a lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.

A door sash lock featuring 5 levers is a much better choice for doors that are outside because it offers higher levels of protection against forced entry and is much more difficult to pick or bypass. These locks have an enhanced design that has been tested and certified to meet the strictest fire, disability and building regulations.

To replace a handle on a sash-lock take the old fastener from both ends by removing the screws. Make sure you have a screwdriver available and take care to separate the components so that you don't damage them. Mark the screw holes using pencil to ensure that you ensure that the new fastener is properly aligned when you are ready to put it in place it. Remove any dust or paint flecks, and then screw in the new fastener. Test the handle to ensure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is an internal latch that can be operated by turning the handle. It is designed to latch the door shut, but it does not lock the door like a mortice lock would. These are most often used on doors that are internal and no locking is required. They can be fitted with knob or lever handles.

There are various sizes of tubular latches that are available. The sizes vary from basic to the expensive architectural. The size you select will depend on the use of the door as well as whether you require the function of a lock. For instance the bathroom door might require an open and thumbturn mechanism in the event of an emergency, so you'll require an latch that can be locked.

The backset of your door will also determine the latch you select. You will need to choose one that has a backset measurement that is equal to the distance between the edge and the centre of the door's hole to accommodate the handle rose or knob. This will ensure your handle/door knobs will operate the latch without a hitch.

If you are fitting an unsprung or sprung lever or door knob, it is essential to choose a durable tubular latch that has a double-sprung follower and tongue. This will ensure an easy action for the latch and prevent it from becoming sluggish or ineffective with frequent use.

The next step is to mount the latch on the door. First, make sure the latch is at a level with the top of the door frame/casing by measuring and marking the location of the latch plate, then drilling holes for it. Utilizing a countersink drill can help create the right recess to sit comfortably in.

Once the latch is in place after which you can attach it onto the door. It is essential to verify that it's functioning correctly before putting in your door handles and putting in the locks, so be sure to test it by closing and opening the door several times. If it is not functioning correctly, try lubricating the door with WD40 before trying it again. If you are still experiencing problems, it might be necessary to contact a professional installer or locksmith.

Keyhole Handles

The keyhole handles are used with a tubular latch that is installed inside the door. The latch is used to open and close the door. The handle engages the latch when pushed down, and releases it when pulled up. These types of handles are typically employed on doors that are internal like living rooms and doors to dining rooms but can also be used on front doors if combined with a nightlatch.

Door knobs are a more contemporary kind of handle that has spring-loaded levers/handles on a round or square fixing rose with a matching thumb turn or an escutcheon. They are available in a wide variety of styles and finishes to suit different doors around the home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems to add additional security to the door. This is accomplished by putting several points of locking along the door height. It requires compatible door handles with the right lock centre dimensions to accommodate the barrel of the cylinder.

A keyhole escutcheon is a cover for the door's keyhole to hide it from view and provide a more stylish look to the handle. They are available in the screw or pop on style and are available in a variety of finishes to match the door handle. A recessed escutcheon, that is affixed to the edge of the door to conceal the keyhole more and provide it with a more modern look, is also used.

The majority of the handles mentioned above are designed to work with a mortice or sash lock mechanism, however, some of them are compatible with Euro cylinder locks too. These handles are suitable for upvc sash door and require handles that have the Euro cylinder hole as well as screw holes in the backplate. These handles might also require a Euro-cylinder escutcheon, or a standard escutcheon, depending on the application.

It is important to understand the distinctions between a sash or mortice lock and a tubular latch and also the compatibility requirements for each. You'll need to consider the door thickness, the door hinges, the frame reinforcements, the dimensions of the backplate for the handle, the lock's central dimensions, and the screw centres on the cylinder.