• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replace Lock in UPVC Door

A professional locksmith is required if your upvc door locks aren't working correctly. They are quick, efficient and finish the job to a high standard.

It's not difficult to alter a upvc bar lock. It's just a matter of knowing what is involved and follow the steps below.

Remove the barrel lock

Upvc windows and doors are extremely common in a wide range of properties. They let natural light get into the home and be opened easily with the correct key. The process of changing the barrel on the uPVC door is a simple job that only takes five minutes. If you've lost your keys, a tenant left and hasn't returned them, or if the lock barrel has been damaged, this is a quick solution.

The first thing to do is to take off the screws that hold the handles. The handles will be removed of the way to allow access to the screws that hold the barrel of lock. Do not loosen the screws fast since this could cause damage to the handles.

Once the screws have been removed Find the screw on the inside of the door that holds the lock on the barrel. It is a screw that stands out and is different in color from the screws on the door. Take it off with the Phillips screwdriver. Take the key that you use to open the lock and insert it into the barrel. Turn it to the left as far as you can. This should let the barrel loose and make it easier to pull out of the door.

After you've loosen the screw, it's time to break the pins that support the euro cylinder in place. You'll require pliers that are strong or mole grips to do this. Grab the protruding end of the euro cylinder and bend it from side to side and upwards and downwards. This will break the support pins holding it in place.

The installation of the new cylinder will be done after the old one is removed. First, you'll need to measure the size of the lock cylinder to ensure that you have bought the correct replacement. This can be done by measuring the distance between the middle of the circular keyhole and the middle of the square spindle. The measurement must be taken from the upper spindle hole.

Change the Cylinder

The euro cylinder is the primary locking mechanism for doors made of upvc. It is easy to change and don't require a locksmith or handyman service. If your lock isn't antisnap or antibump, it is recommended to change it to one with this security built in. These are inexpensive and can save money and inconvenience in the case that your locks have been compromised.

To start you must open the door and stand in front of it, so that you are able to reach the screw for retaining the handle with your hand or an appropriate tool. It is possible to loosen this screw a little bit, perhaps a quarter-turn to get started.

The cylinder will now be able to be removed easily because the screw will not be able to hold it in its place. The next step is to determine the size replacement cylinder you will require. There are about 25 different sizes to pick from. It is recommended to bring your old cylinder when you buy one new to ensure it is the right size.

If you're not sure of the dimensions, measure from the center of the screw hole to the end of the cylinder. You can only be sure that you are buying the right sized cylinders for your upvc door by measuring from the center of the screw hole to the end of the cylinder.

Insert the new cylinder into your door in the opposite direction you removed the old one. Aligning the lock cam could be difficult, but it is usually just an issue of alignment.

Now you will need to install the long screws for securing. After that, you are able to test it to ensure that the cylinder is secure in the door. Then, you can you replace locks on upvc windows reconnect the handle to the door and test it again. If all is good, your cylinder lock in your upvc door has been changed and you should have added another layer of security to your home.

Switching the Handle

There are many reasons why a door knob may become loose. It could be due to wear and tear on the handle or the square spindle within the handle. In this instance the door handle will need to be replaced.

It is crucial that the door is open to allow it to close between removing the handle and replacing it. Then, remove the screws from the interior face of the handle plate with the screwdriver. This will free the handle from the plate. Do not lose the screws, as you will have to replace window locks them later.

You can now remove the handles to get access to the cylinder lock within the door. It will be a round or bulb shaped cylinder that is only found in multi-point window locks repair - speaking of, on upvc doors as well as aluminium doors. Changing the cylinder is much the same as changing the handle. The only difference is that you will need to take the old cylinder from the door and replace it with a new one.

When selecting a replacement handle it is important to consider its size. Make sure the handle is identical in size to the original one as it will have to be able to be able to slide over the screws that hold the handle in place. A good place to start is to refer to a size matrix that will provide the standard sizes of replacement handles along with their keyhole center to handle plate distance.

Consider upgrading your upvc door handles to a higher security standard like a Sold Secure SS301 set or 2* Kitemark security handles. This will enhance the security of your house and make it easier to operate your door. The price of these sets may be slightly more expensive but the added peace of mind and added security is well worth the cost. Having to constantly push the handle of the door up and down to shut and open it is not something you want to be doing.

Change the Lock

The security lock on your upvc windows locks repair door could be a vulnerable point for burglars. You may want to upgrade your uPVC door with a multipoint lock to make it more secure. This could include a deadbolt as well as an open hook to ward off the intruders. A professional locksmith can help you with this, however it is also possible to complete the work yourself. The process is fast and easy. You'll need some basic tools.

The first step is to loosen the screws that hold the handle in the position. With a screwdriver, you can remove the screws and place them in a safe spot. Then, you can raise the handle up to reveal the screw that holds the cylinder in place. You can remove this screw and replace it with a the new one. You should make sure that the screw is the same size as the original. It must be aligned with the barrel of lock.

Making changes to the lock of your uPVC can be intimidating. It is vital to the security of your home. If you make a mistake, it could leave you unable to unlock the door. If you know how, it's fairly simple and costs less than contacting an expert locksmith.

You'll need to remove the inner faceplate from the lock in order to replace the lock. You must be able see the screw that is located inside the door, as well as the bolt that holds it on the outside of the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.

You may need to change the lock of your uPVC door for a variety of reasons. It could be because you lost your key, or a tenant moved out and did not return keys, or you simply want to increase the security of your home.

A change in a uPVC locking mechanism can be accomplished by anyone with basic DIY skills. If the lock is stuck, you will have to examine the hinges inside the mechanism. If the hinges have been lubricated it is a simple repair. If you aren't sure you can do it, consult an expert.