• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Installing a cat flap might appear daunting, but it is fairly simple by following the correct instructions. Firstly, determine how high you want the cat flap to be (on average the belly height). Mark this point on the door and then use the template provided as a guideline to drill.

If you have a small kitten you can prop the door slightly open and gradually encourage it to enter. Reward it each time it goes through.

Take a measurement of the door

A cat flap is a great method to allow your pet to leave and come in and out of your home as it wants. This will keep your cat healthy as it will ensure that it is exercising regularly and will also allow it to go back inside if it is stranded outside in bad weather. This will reduce the amount of time you have to let your cat go in and out and also make your home secure by letting you know when it's left.

However, it is important that the flap on your cat is fitted correctly to prevent your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's belly and the height of the doorway at your home to make sure the flap is at the proper height. You can alter the height of your flap in case your cat is smaller or taller than the average.

Next, use a spirit-level to mark the middle of the door. This is where you will put in the flap. With the markings as a guide, take a jigsaw and cut out the shape of the flap inside the door. After cutting the flap, sand down the edges to create smooth surfaces. Drill any necessary holes.

Fitting a cat flap should not take more than two hours. However, the process could be a bit more difficult in the event that you have to put it inside the door of a uPVC or composite door as these doors come with an array of thicknesses that can affect the way the holes are cut and what they are inserted into. This is why we recommend calling a professional to carry out the job, particularly in the event that you've never worked with glass before.

Measure Your Cat

You will not have to spend hours of ignoring the pet meow to be let in or out. This is especially helpful when your cat is inside during the winter months while you are at work.

If you want to fit a cat flap in your door, it is crucial to take measurements of your cat prior to attempting the task. It might appear to be a simple task, but it is important to get the measurements right. Otherwise, your pet may have difficulty putting it in use.

First, ensure that your cat is calm before taking measurements. You will need to hold them in a way that they are not able to move, and make sure that the ruler or measuring tape is flat against their body, not bending in any place. Holding the ruler or measuring tape against their body from the top of their head to the bottom of their tail can allow you to get an accurate measurement.

Once you have the measurement of your cat, it's time to look at the door and decide where to put the flap. The flap should be placed at the level of your cat's belly. This will allow them to walk through the door without much effort. This will also stop the flap from making a lot noise when it swings back and back.

You will need to take into consideration the thickness of the uPVC or composite door too. While timber doors are all of the same thickness, uPVC and composite doors are different in their overall structure and this can make the installation of a cat flap more difficult because you must make sure the hole you cut is the right size for cat flaps your pet.

You can also use the template included in the instructions to mark the position of the hole on the door. This will allow you determine where the opening needs to be, and also to ensure that the template is correctly positioned on the door. Using a spirit level to check that the template is in a straight line against the door can be very helpful.

Cut the Flap

Before you can put in your cat flap you have to cut the door panel in order to make a space big enough to accommodate it. This can be a daunting task so it's recommended you get a professional help you if you lack the expertise or experience. You can also refer to the instructions provided with the kit to learn how to do it correctly.

You can use the height of the cat's or kitten's stomach as a guide. A good guideline is to place the cat flap about 10-15 centimeters from the ground as this is the typical belly height for cats. This will let your cat pass through the flap easily and make it more difficult for other cats or naughty neighbors to get in or out.

The position of the cat flap on the door using pencil. If your kit includes the template put it on top of the door. Use the marks on the template to drill holes in each corner. Then, you'll be able to cut the template and replace it with the flap for cats.

If you are installing your cat flap in a door made from wood or upvc door panel with cat flap fitted, you can do this yourself if you feel confident enough to handle the jigsaw. Be sure not to cut through the vertical rails or mullions of your door. You can use a jigsaw to cut the panel into a circle or square according to the design of your cat flap. Make sure to take your time and don't try to force the jigsaw into cutting faster.

Once the hole is made, carefully place the cat flap in its new home. Make sure it's securely secured. If it features caps for screws, then put these onto the screws that protrude. Once the screws are in place, you can sand any rough edges of the cut and then apply sealant around any gaps to ensure there aren't any draughts entering into your home.

Install the Flap

If you have an ordinary cat flap, you can help your pet to go through it by placing a small amount of cat food on the top of the door. You can also push the cat using the help of a stick or your hands. Once your pet is used to walking through the flap, it should be able to go in and out as it pleases so you can let it out and in without to open the door to allow it in all day (and potentially in all weather conditions).

You can install the flap onto an UPVC or glass door cat flaps however it's not quite as straightforward as fitting one into a timber external door since UPVC and some glass doors don't have the same thickness. This can have a significant impact on the way you cut the hole for the flap and could affect the way your flap fits correctly once it's been put in place.

Depending on the type of cat flap you pick It could come with its own mounting kit and template that will show precisely where to drill the holes for it. If the kit doesn't include a template, you are able to create one yourself. It's important to not use the jigsaw to hard when cutting, so that it doesn't leave a bigger than necessary hole in your door.

Most cat flaps are square or rectangular in shape, but there are also some which are circular and these are usually more difficult to place. If you have a circular flap it is essential to ensure that the hole is in the correct location on your door as if it's not, your cat flap in upvc door cost won't be able to use it and could be left out in the sun all day (or even at night).

Certain models of cat flaps come with locks that permit you to control when your cat comes in and goes. These can be very useful if you're concerned about your cat going out at night and then coming back in the darkness, or you're working all day. The lock can be turned on to allow entry or exit, and some are locked in either direction allowing you to shut the door completely, which is especially beneficial for sick or elderly cats who aren't willing to go out in the rain.