• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass so that any shards fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window repair, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues such as sliding. A sagging uPVC window can cause issues with light, draughts, and even security. It's crucial to act when you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair the loose upvc window repairs near me window handle yourself. First, you'll need to close the window and do an initial fitting. The corners of the sash must be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to take action if get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease It could be the hinges that are at the fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's easy to change the hinges on a window, but it's easier if someone else helps you hold the frame.

It is also important to verify that the upvc window repair near me hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also lower the risk of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges because of wear and tear, may become displaced, which can cause gaps to develop where the sash joins the frame. This can be easily repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to have them realigned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it's possible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.