• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your pet leave and come as they please, without you needing to let them in or out. They also prevent your cat from peeing in the house.

Installing a cat flap into the door panel made of upvc is a lot easier than a glass door, but it does require some skills and the right tools.

Take a measurement of the door

Installing a cat door into the front door https://v.gd/cat_flap_installers_84197 is difficult however, as long as the cat flap is of the appropriate one and you follow the instructions, it shouldn't be too difficult. We will show you how to mark the shape and use an jigsaw to cut the door area. Then we'll complete the job by affixing the flap. This will ensure the flap is in place and shields the doors from damage caused by rain and wind.

The first thing you need to do is take a measurement of the width of your pet in order to get an accurate measurement of the size of cat flap you will need. This will ensure that the flap is large enough that your pet can enter and leave the house without having to open or close the door each time, yet small enough to keep the pet from straying too far either way.

Once you have the measurements you can determine the location on the door where the template should be placed. usually this is done with an X, however some kits come with a drawing that shows where to drill, if you have one, then attach it to the door and draw a line around the door. If your door has moulding or a sill at the bottom, make sure you leave enough space between your cat and the moulding or sill.

Set a square to make sure you're cutting properly and to make sure the hole is in a rectangle shape. Once you are satisfied with the result, you can begin to remove the rest of the door material. If you have a set square then use it to ensure whether you're cutting in the right way and to ensure that the hole is a good rectangular shape. Once you are satisfied with the shape, you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great way to let your pet out and in without having to worry about them being in the house with guests or leaving unwanted gifts in the home. It also reduces drafts and helps to keep the temperature in your home in a stable manner. However, fitting the cat flaps for french doors flap to your door can seem like an overwhelming task for those who have never done it before, which is why many to hire a professional joiner or carpenter to do the job. It is an option, but you can do it yourself if the tools are right and the directions are followed.

This is much simpler to do on wooden doors, but it is still possible using uPVC. However, you must be careful not to damage the doors because this will cause the door to be damaged and invalidate your warranty. The first step in the process is to take measurements of the door, making sure that it will accommodate the new cat flap. If you have a standard uPVC panel it should be a breeze. However, if your door is composite or a different type of door, you might require more care.

The next step is to determine the height of your belly for your cat flap insulation. This is the amount of height between the floor and the underside of your cat's stomach. You will need to locate an area on the door that will allow your pet to comfortably pass through. Once you've got the information, you'll need to mark the area using a spirit level and a pencil so that you are certain that the opening will fit your cat.

After you've marked the area, it's now time to cut the hole. It is important to take your time and use a jigsaw ensure the cuts are smooth and clean, not rough and uneven. This could cause damage to your door. Wear safety glasses and a dust mask when using a Jigsaw. Inhaling sawdust is dangerous for your health. After you have finished cutting the hole, you will require sandpaper to smooth the edges so that the cat flap is easily fitted into place.

Cut a hole

The process of fitting a cat flap to an existing door panel or double glazing sealed unit is quite difficult. If you're not experienced in DIY, it is recommended to hire a professional to complete the work for you. A faulty job can not only be unsightly and unattractive, but could also be security risks. It could allow cold air in when the cat is outside and hot air out when inside.

Mark the hole position on the door with a pencil and spirit level. This will ensure it is positioned correctly and runs flush with the rest of the door. Make sure you have sandpaper on hand to smooth any rough edges.

After the line is marked you should cut out the hole using a jigsaw. Be sure to wear any necessary safety equipment for working with the power tool. If you are concerned about the noise of a jigsaw you can buy an electric version that is much quieter and easier to use.

It is important that you only cut away the material needed to make the cat flap. A little bit of extra material will be needed to cover the thickness of the the flap but cutting off more than this could cause issues and harm the frame of the door.

If the upvc door has a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need create an extra-large hole to ensure that the metal doesn't get in contact with the walls of the flap.

If you are fitting a cat flap into an upvc door or a double glazed window with a frame made of metal, you will need to speak to a specialist who can supply you with a new glass pane that already has the hole for the cat flap insulation flap already drilled inside. This is less expensive than trying to install a cat flap inside an existing pane that was not designed for this purpose.

Place the Flap

Cat flaps allow your pet the freedom to move around anytime they want, allowing them to relax at home whenever they'd like. However, if you own an uPVC door it can be difficult to put in a cat flap, particularly if you don't own a glass pane that can be cut to fit one. If you're able to purchase and install a half-glazed replacement uPVC panel, it's possible to add the cat flap to these doors. It's not a simple matter of cutting an opening in the door. You'll also need to do a few things to ensure that the door is safe.

A composite, uPVC, or GRP door panel is generally composed of a plastic skin that is attached to an insulating polystyrene core. The material is quite fragile and care must be taken when cutting through it to avoid damaging. This kind of door has a template can be used to cut the hole.

Once you've determined the position of the hole in your door, it's time to fit the cat flap itself. You can pick from a range of options, from simple push-button flaps to ones that are microchip-activated and allow your pet in. Whatever kind of cat flaps you choose it is essential that your cat is able to use the flap without getting stuck in the rain.

A circular fitting cat flap in upvc door panel (via Openprivacy) is more effective than a square, because circles can be cut more securely into the glass. This is because square holes are more likely to crack the glass when they are drilled. This is also a safer choice, as you won't have to drill into the toughened glass that could shatter and harm your pet or family members. This is particularly important if there are elderly or children at home who could be hurt by glass shattering.