• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Front Door Lock Barrel Replacement

Front door barrel replacement upvc door lock mechanism for locks is a relatively easy DIY job that will reduce the cost of calling out locksmiths. You can purchase kits that come with all the tools you need.

You'll need to buy an additional cylinder-lock barrel, a screwdriver set that is solid, a hammer or pliers, for extra grip, and oil.

Length

There are numerous lock barrel choices to choose from to ensure that your front door is secured. However, when choosing a new lock barrel type the length of the cylinder can be critical to the security of your home. Cylinders that extend too far can snap, and those that are short could hinder you from turning the key to unlock the door. There are a variety of methods to determine the length of a cylinder, to ensure that you purchase the replacement cylinder that offers the best protection for your door.

To determine the proper size of the cylinder, remove the old cylinder from the door. Utilizing a screwdriver, remove the screws that keep the lock cylinder in place. Once the cylinder is removed, you can measure from the screw hole in the middle of the cylinder to edge of the handle plate on the inside of door. Make sure you include the thickness of the plate as well. You can also measure the length of the threaded shaft that is on the new cylinder to determine its size.

Install the cylinder into your door after determining its length. Start by drilling a hole in the door. This is the hole in which the handle will be placed. It should be slightly larger than the diameter of the new cylinder. Afterward, attach the interior handle or knob to the new handle, making sure that it is able to pass through the spindle of the latch and is able to turn smoothly when it is turned.

If you're Replacing Patio Door Lock a deadbolt, you should also think about upgrading your strike plate. The strike plate is the piece of metal that is attached to the doorjamb and locks into the bolt when it's pushed in by a key. It is essential to replace the strike plate with a high-security version that is harder to breach. Find a strikeplate with a reinforced metal structure to resist kick attacks. Use screws that are at least 2.5-3 inches in length how to replace upvc door lock ensure they are able to penetrate deep into the door jamb.

Design

The lock cylinder is a part of the front door lock you can use to open or close the handle. It has pins that move into position when you insert the key. When it comes time to select the right lock cylinder you'll need to know a few things. It is crucial, for instance, to measure the length your cylinder locks that you have in place so that you can order the correct size. You will also need to think about any door replacing Patio Door lock furniture, such as handles and escutcheons.

Euro Cylinder locks come in a variety of designs. Some are double cylinder locks, which provide security from both sides of the door. They are typically fitted to doors that require more security than standard locks and are also utilized in commercial spaces. Make sure that the lock you're considering is British Standards approved, and is in compliance with these requirements:

Anti-Snap: An intruder could try to snap the cylinder by applying pressure to the outside of the doors. To prevent this from happening, a thin strip of sacrificial material is cut into the cylinder.

Anti-Drill - Some burglars attempt to drill holes into locks and then break into homes. To stop this from happening the pins of a cylinder should be made from hardened metal.

When you are looking for a new cylinder, you should ensure it is anti-drill. This will stop burglars from tearing the plug off by drilling it with an electric tool.

After you have chosen the new cylinder lock you'll need to gather all the materials you will need to put it into place. Included in this are an appropriate screwdriver for the task, a hammer for extra grip, and pliers. It is also recommended how to replace a lock on a upvc door have lubricant to ensure that the mechanism operates smoothly. Before you begin, be aware that changing the barrels of a lock on a uPVC door can be difficult. If you're unsure about doing the work by yourself, it's recommended to call a locksmith or specialist to get help.

Keyway

The keyway on a lock is the form of the connection between the cylinder and the key. The key is made up of a series of ridges and grooves that run down the length of its "blade" and, when inserted, these coincide with the cutouts in the pins of the cylinder. The cylinder is able to turn if it can confirm that it is the correct one.

Each brand of lock comes with a different keyway that allows it to be locked or unlocked using the use of a specific key. There are various keyways sizes and shapes within a single brand. This allows for a level of security to different locks, since keys of the same brand are not able to open the locks of another.

In most homes the latch is operated using the lever, which can be pushed down or lifted to release the bolt. This is more comfortable than a knob that requires you to turn. However some commercial settings make use of knobs to increase security.

When the correct key is inserted, the spring-loaded pins shift into a position that allows the plug to rotate. The pins align with grooves on the blade of the key and allow the lock to recognize the right key. If the cylinder is manipulated incorrectly, or if the key is not a proper fit, the pins will shift to the control line instead of the operating shear line and the lock will be unable to open.

In this particular photo it's likely that the cylinder was reset-keyed, which is when the pins that are in place are moved upwards to the right height so that the key can freely move within the cylinder. This is typical when keys need to be transferred from one lock to another in a dormitory. Many people require their locks to be rekeyed whenever they move house or want to allow access to a new roommate or employee without the need to change all of the locks to the same key. This is a reasonable option to improve security at home, and can often be accomplished with only the key cylinder.

Installation

Removing a barrel lock on uPVC doors is a simple task that can be done at home. The first step is to find the screw that is under the lock at the edge of the door, it is usually distinct from the rest of the screws as it has a different color. Remove it with an Phillips screwdriver. Then, insert the new barrel into the last slot. Then, place the knob on the new barrel and push rod back into place. It is essential to confirm the orientation of each part (the barrel, push rod, and spring / lever housing) before you begin reassembling.

With the help of a screwdriver, you are able to easily remove the handle and knob to gain access to the lock replacement upvc door body. The cylinder can be removed by turning it counterclockwise. You can then either take off the cylinder and be able to have it "re-keyed" or keep it in place. Re-keying won't change the pins inside the cylinder. It will only shift them into the proper position with the key that matches.

Another option is to simply remove the cylinder and install a new one. If you decide to do this, it is crucial to choose the same size as your old cylinder and ensure that the pins are positioned correctly in order for your lock replacement upvc door to work properly. After installing the new cylinder, it is recommended to grease it to make sure that everything runs smoothly.

If you have a mortise lockset the process will be slightly more difficult. This type of lock is set inside the pocket (mortise), which is cut into the side of the door. It will take some careful measurements and possibly several attempts to make the latch and bolt sections to align. Once they do it, you'll need to remove the strike plate (which is held in place by screws at the top and bottom of the frame of the door) and the latch bolt, which can be difficult if you don't have the right tools.