• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It's discreet and doesn't require additional key fobs to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence that can be up to 20 presses. This will then allow the startup of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of security products that are available including tracking systems, alarms and immobilisers. Not all of them are equally effective in protecting your car. A tracking system can help you locate your car if it is stolen however it cannot stop the crime. An immobiliser, on the contrary does exactly what is a ghost immobiliser it says on the tin: it disables the engine of your vehicle so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your vehicle.

Utilizing the buttons already in your car, the ghost device creates an exclusive sequence that has to be entered before the engine will start. This can be accomplished using the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This option is particularly beneficial if you have to give your car away for valet parking or servicing because the immobiliser will still be active and not deactivated.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a standalone unit. It's not just an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security device that protects your car from key cloning, hacking & ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be placed in the vehicle without the need for extra wiring, and has been thoroughly tested to ensure it works with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to get around existing immobilisers.

The advantage of using CAN data is that it operates in a silent manner when compared to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and ghost 2 immobiliser reviews is also unrecognizable by traditional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons on your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended 20 or more presses for extra security. The iPhone app is limited to one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is protected.

The ghost immobiliser review immobiliser problems (https://lovewiki.faith/wiki/Borregaardhalvorsen9573) also stops car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) to allow you to transfer your vehicle to a valet service or for servicing without the need to enter a PIN code.

Tested for each vehicle

The Autowatch ghost 2 immobiliser review is the first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device is able to intercept signals and prevent your car from operating normally until you enter a specific code. The system can be turned on or off through your smartphone's app without the need for extra wires.

The standard factory immobilisers work by using a transponder that is built into the key. This transmits a signal to the ECU. The car will start when the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser will not recognize it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning, and even key theft. The only way thieves could take your car is by physically towing it away and even then, they wouldn't be allowed to drive it.

Ghost makes use of the buttons on your car, such as the indicator stalk as well as the steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered before you are able to use your car. This is done without additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that the system has been set up.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is hidden within the vehicle so it can't be removed or disabled by thieves. It's more difficult to remove than a car alarm that requires disarming via the use of a button sequence. This makes it a perfect complement to a GPS tracker, which can help locate your car after it's been stolen.

Emergency PIN code override

You don't need to go far on social media sites to find stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the car without your original keys.

The ghost ii immobiliser immobiliser helps combat this issue and offers an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It creates an unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel and the centre console. This unique PIN is entered alongside the original key fob to stop the engine from getting started. The unique override pin can be located on a black card which you will receive following the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the vehicle's wires, and does not emit radio signals, therefore it isn't able to be recognized by thieves using diagnostic software that can identify the security system you have installed. This makes it a great alternative to an electronic device for tracking.

In contrast to other security systems that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems but this must be stated prior to the installation of the device. They also work with valet/service modes and a great alternative to a tracking device if you take your car to the dealer to address an electrical problem.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. It's now more easy than ever to steal your pride and joy due to the availability of key cloning devices and ghost immobiliser price door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been cloned.

It communicates directly with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent as it doesn't utilize radio frequencies or key fobs. This means it isn't detected by diagnostics or other car hacking devices. It also prevents the addition of the key to a new one or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is concealed inside your car, using buttons on the steering wheel, centre console & door panels. Before you can begin your car, you need to enter a unique, changeable PIN code up to 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car from being started or driven away if a PIN code isn't entered prior to. If you are driving away with the device in motion it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN code at this point, the warning will continue to flash and require a new PIN code for every attempt to start your vehicle.