• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may need to consider security screens that has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems that include sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The corners of the sash should be aligned with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's important to take action. Windows that leak water do can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal rather than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease It could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's easy to change a window hinge, but it's simpler if you have someone to help hold the frame.

Check that the upvc window repairs hinges open and close in the right direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

The issue could be caused either by opening the window improperly or a faulty installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give advice.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window repairs near me easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become misaligned due to wear, causing a gap where the sash and frame meet. If they are beyond repair, it might be necessary to have them realigned. In addition, the interlock could also become misaligned. It is located on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc window repair near me with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs windows made of upvc will provide excellent security and insulation for your home. However, it is important to recognise that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as you can.