• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles in your home are an important part of the design. A new handle will bring your decor and space modern.

Over time the knobs on your repair door handle could become stiff or even break. These are indicators that it's time to change them. This guide will help you select the correct door handle replacement for your home.

Door Knobs

The handles on your doors will enhance the look of your home and make it easier for you to open and shut them. They are available in a variety of finishes, colors, and types to complement your decor. If yours is beginning appear worn or just need an upgrade replacing them is simple and door handle replacement can be completed in a few steps.

You need to locate the spindle, or shaft through which the knob is inserted to the door. Some have a small hole that you can insert the screwdriver with a small diameter to loosen the set screws holding the handle in place. Some have a slot or hole in which can be used with a flathead screwdriver to push on a spring-activated pin called a detent. This pin lets go of the latch mechanism, and lets you to pull or push the knob.

Once you have the spindle, or shaft in your hand Remove the knob and replace it. Check that the latch is working properly before tightening the new set screws.

Once you've replaced the knob, put the latch rod in position over the hole in the door and then lock it using the rod mechanism on the second knob. Make sure that the holes are lined up, then thread in the screws on the latch plate and tighten them.

Some prefer a smooth or brushed finish on their upvc door handle repair hardware to give it modern, sleek design that complements other furniture in their homes. Others prefer a more rustic style which is great for farmhouse-styled spaces. If you have a member of your family with mobility issues, you might prefer an rim or lever lock that requires less pressure to operate.

While aesthetics have been the most important factor in door lock handle repair handle design, other aspects are becoming more important too. Accessibility and control of infections are key issues that have led to the creation of new designs for handle handles including ones that can be operated using the forearms of a person.

Latch

The latch that holds the handle of your door open will wear down as time passes. The replacement of the latch to fit the new handle is an easy DIY project and will make a huge difference in how your door opens and closes.

Depending on the kind of handle you choose the latch can be a separate piece or a component of the knob. In either case, you will follow the same steps for removing and replacing. It's simple to remove the old latch, particularly in the case of doors with a "magic" button. It is located on the opposite side of the knob, this small pressure-slot is what you have to press to pull the latch out of the handle and off of the latching mechanism.

If your handle does not have this button, the first step is to take off any cover plates that sit over the latch plate. These are usually rectangular or circular and can be removed by using a screwdriver to pull them off of the handle. Some have a small slot inside that you can slide your screwdriver, whereas others snap off.

The next step is to loosen the two machine screws holding the latch and the inner plate to the door handle. These are the screws with a sharp point and you'll need to keep these in a safe place to reuse them in later steps. Once these are off you can remove the latch plate and mechanism out of the door's hole and set it aside.

Then you can begin to install the new latch. Insert the inside plate of the latch into the hole in the upvc door handle repair near me and secure it with the provided hardware. Make sure that the square pin on interior of the latch faces the latching mechanism inside the handle and aligns with the screw holes on the other sides of the handle. Then attach the latch's exterior plate using the screws supplied.

Strike Plate

One of the most common reasons for replacing the door handle is that it feels loose or isn't locking properly. This is usually due to misaligned components in the latching mechanism, like the strike plate being too short or moved upwards or downwards on the doorjamb with time. This project lets you replace your old strikeplate with a more substantial one, which can provide more security for your door and will keep it closed.

To determine if the issue is due to the strike plate, apply some lipstick or similar marking material to the latch bolt. Close the door, door handle replacement then try to latch it. If the mark is below the strike plate hole this indicates that your door isn't latching because the plate is too short. If the mark is above the strike hole on the plate, it's likely that the strike plate has been moved up or down on the doorjamb.

You may be able simply to put the new strikeplate in the old one using the screws included with it, depending on the door you have. It is possible that you will need to first drill holes and then chisel the wood to ensure a perfect fit. If this is the case, you must be cautious not to chisel too much or you may cause damage to the integrity of your doorjamb.

Installing a brand new box-style strike plate will give the lock a stronger grip on the doors and will require more force to open the doors. Typically it will require two longer screws that secure the strike plate to the door frame. To do this, you'll need to remove the current strike plate and then drill and chisel the wood to create space for the new one.

This difficult-to-find strike plate is made of solid brass and has an extremely thick. It's designed to be used on antique rim locks. It comes with both wood screws and machine screws, so you'll have the right hardware for the job. Remember that wood screws have a pointed point, and machine screws have a blunter tip.