• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

The freedom to let your cat leave and enter the house at will is an excellent method to keep your pet physically active and mentally engaged. A flap can aid in reducing the frequency of accidents due to toilets, making it easier for your cat to leave the house when necessary.

Take a look at the Door

A cat flap allows your pet to move around as they please without having to open the door for them. This makes it ideal for keeping them in when you're home or away and helps keep unwanted pests from the home too!

It is essential to measure the door before you buy a cat flap as there are various sizes available. This ensures you get the correct size that fits into your upvc door, otherwise, it might be too small or too large for your cat and he will be unable to use it.

Before you do anything, though, cat flaps use a ruler to take measurements of the width of the door in a variety of locations along its edge. You should also measure the height of the door in a few spots. This is because a door that is too high will cause your cat to perform an exercise routine like a gymnast every time they need to use the flap!

Ask a glazier for help when you're unsure of how to measure the door. They'll be able to determine if your door is suitable for cat flaps and can give you advice on the right size flap to purchase.

Draw the outline of the hole on the door after you have taken the measurements. This will provide you with an idea of how to cutting the hole and will prevent you from making an error that will cost you money in the long run!

You must also ensure that the hole you're making is in the right place. If you're fitting a cat flap to a patio door it is important that the hole does not reach too close to the hinges. This could result in leakage or issues with the seal.

It is best to delegate the job of installing the cat flap on the glass door to an experienced glazier. It may be difficult to fit a cat-flap into an existing pane. You may also find that it breaks and loses its weatherproof seal.

Measure the Cat

A cat flap lets your pet leave and come back whenever they want without you having to leave him home all by himself. It can also help to stop draughts from entering your home, which isn't good for you or your cat!

If you do have a uPVC or cat flaps composite door, it could be a challenge to put in a cat flap. These doors are made from different materials, and the way they are installed is different. Before you think about installing a cat flap in your uPVC or composite door, make sure that it's compatible, and you have checked with the manufacturer as any modifications could cause the warranty to be invalidated.

Generally speaking, these kinds of doors are built to be durable and tough and have insulation built-in. This makes them more resistant to the elements of weather than other types of doors, however they can be difficult to fit an animal flap. Get advice from a professional before installing a cat flap on a uPVC door or composite.

You'll need to determine their height to ensure that they can pass through the door. It is easiest to measure their height when they are calm or asleep, so they aren't moving around. Once you have their height you can measure the distance from their stomach to the floor to determine the location of the flap's bottom. This location can be marked on the door.

If you are using power tools to cut your composite or upvc door panel with cat flap door, you have be extra cautious. The act of drilling into metal could cause cracks, especially when the area is made of toughened glass. It is recommended to hire an experienced glass installer to install a cat flap in the pane. This will stop the glass from breaking and becoming hard. A glazier will also be capable of providing you with a cat flap that is less likely to break and is safer for your cat to use.

Cut the Hole

If it does not then you can create one yourself using a sheet of paper (tracing paper is ideal). If it doesn't, make your own with a thin piece of paper (tracing papers are great). After the shape has already been penciled in on the door, use your spirit level to ensure that it is horizontal. This will allow the cat flap to properly fit into the opening and prevent it being capable of sliding open or close.

Next, use your jigsaw and cut the shape drawn on the door. Make use of a blade specifically designed specifically for uPVC doors. It will usually be labeled with this information. If not then ask the staff at your DIY store for help. Once you have the hole made then place the flap against it and push it open to ensure that the flap's movement is smooth. If it binds on any point, then use a file or rasp to correct this.

You should also check whether there are any electric cables or gas pipes within the door you'll be cutting through wall cat flap, because they could be damaged by your Jigsaw. Also, be aware of any handles, or other fixtures on the door that must be removed in order to install the cat flap. Be cautious not to damage these items during the process.

The majority of people who install the cat flap themselves have a standard solid uPVC door, and therefore will not have to worry about any of these issues. If your door is made of wood or has a decorative part that cannot be removed, this will complicate the task.

For these kinds of jobs, it is worth getting expert guidance from a cat-flap fitting expert. It is essential to perform them correctly to avoid future problems. Making the wrong choice could cause the door to be damaged, which could invalidate the warranty.

Install the Flap

Once you have cut your hole, put the flap to see if it opens and fits. If you notice any spots that stick or catch or stick, you can file them down using an sandpaper or hand file until it fits properly and opens with no issues. Make sure that the flap sits flush with the door too.

If your tool doesn't have templates, you can use tracing paper that is thin, such as a piece of paper or acetate. Lay the paper against the door and mark the area where you'll need to position the flap (this will be your cutting guide). Make four screw holes at each corner of the flap using the pencil marks you traced on the door. These are the screws you'll need to use to fix the flap in place.

The majority of uPVC doors are solid and therefore simple to cut into. However, if the door is made from GRP or a composite then it can be more challenging. If you are not familiar with this, it is recommended that you hire an expert. They will also be able to provide you window with cat flap advice on whether or not your door is suitable for installation of a cat flap.

If you are planning to install a cat flap in composite doors, it is important to first consult with the manufacturer or a professional joiner. Any alterations made to the doors could make it impossible to honor the warranty. If you decide to do the work yourself, bear in mind that it can be messy and may even be hazardous.

You'll need an instrument like a grinder or a saw to cut through composite doors, rather than just the GRP. Be aware that this can be extremely dangerous work and you'll have to take extreme care not to damage the door or yourself since it's extremely fragile. It's also important to note that cutting holes into any type of glass for a door is far more difficult than making the same changes in a uPVC or solid timber door.