• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sliding Patio Doors Repair

Sliding patio doors are an excellent way to take advantage of your outdoor space, but they can become difficult to open or close. This can be caused by many issues, such as dirty tracks or poorly aligned sliders.

Clean the track first and lubricating the rollers. You can also utilize the adjustment holes on the lower part of the movable panel to re-align your rollers.

Tracks that are damaged or dirty

A sliding door that doesn't slide as it should can be caused by a dirty or damaged track. Over time, dirt and grit, as well as corrosion can form and stop the track from moving smoothly. The solution is to thoroughly clean using an abrasive and mild detergent. This process should be carried out regularly to ensure smooth operation and to prevent expensive repairs in the future.

A door that is leaky is another frequent issue that requires immediate attention to prevent water damage, mold growth and structural deterioration. The issue is usually caused by worn weather strips and a misaligned door. This can be corrected by replacing the old weather stripping and aligning the doors.

Rollers that jump off the track are another frequent issue that can be fixed with some simple DIY work. Recruit a friend to help you with this job as the door could be heavy. Stand inside the house, and then lean a panel towards you to shift the rollers. After lifting the panel off the bottom track, it's time to place it on sawhorses to stop it from falling off. Then, loosen the roller's screws and remove them with a screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. You can then clean each wheel with denatured alcohol and the rag, then move the wheels and reconnect them to their tracks.

It is possible to straighten a bent section of track using a mallet made of rubber and a block of wood patio door repair. If the bent portion is near hinges or has the potential to cause more damage, it's recommended to contact a professional.

Rollers that are not aligned

If your sliding door is having a problem sliding, it is likely that the roller wheels have been misaligned. The wheels could be dirty, rusted or their bearings are worn out. This friction causes the door to snag and grind when it is opened or closed. This can also cause the sound of squeaking.

This is a straightforward fix. You don't need to remove the door to get at the wheels since they are located on a bracket which is adjustable. Use a screwdriver and find the adjustment holes on the frame (usually either side). Rotate the screws to control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue to adjust the door until it is open and shuts easily.

It is crucial to adjust the wheel before making adjustments to your latch. To ensure that the lock functions correctly the latch hooks have to be aligned with the strike plate. If you don't, the latch may shut or open while you're not in the room.

Patio doors that slide are an investment, and making sure they are working properly will keep your family safe and secure. You can prevent costly repairs by fixing problems that are common, like broken tracks, rollers and handles. Contact our team to learn more about patio doors. We will assess your sliding patio door repair company door repair needs and help you keep it in good condition. Our professionals can also help with any replacement parts that you may need.

The door frame is loose or damaged

Sliding patio doors are a great addition to any home. They are a practical and attractive alternative to swing-open or hinged doors for patios. However, like any other hardware that they are, they could face a variety of problems in time. A lot of these issues are fixable with a little DIY skills.

A common issue with sliding patio door repairs near me doors is a gap in the frame. This could be due to a variety of factors, including an improperly aligned track or rollers, a damaged track or door, or a bent door frame. In the majority of instances, the issue can be easily fixed by removing the doors and attaching the track. This must be done with extreme care to not harm the track or frame.

In some cases it might be necessary to replace the entire track. This can be done easily with a universal replacement kit which is readily available at major hardware stores. These kits are easy to install and will have your door working properly again in no-time.

Regularly inspect your sliding door's hardware and frame for signs of wear, like loose bolts or screws. This is an easy and effective DIY patio maintenance task that can be done with the help of a screwdriver. It is also important to grease your rollers and tracks to make sure they operate smoothly and prevent premature wear.

For many homeowners, their patio doors are the primary entry point to their backyard as well as outdoor living space. Therefore, they have to be able to function properly to ensure the comfort of their home and offer security. By taking the time to follow these easy DIY maintenance steps homeowners can extend the life of their sliding patio doors, and avoid expensive repairs or replacements.

Faulty Handle

Patio doors that slide open are a great way to enter your home and get access to your backyard, however they can be difficult to operate when they are not aligned properly. A faulty handle may also cause the door to not shut or open properly. Fixing a loose handle can be done at home.

In many instances, a loose handle is simply the result of screws that have made through the backplate. To fix the issue tighten the screws on the inside handle with the help of a screwdriver. If the handle is still loose it could be a sign that the threads have worn away and need to be replaced.

A damaged latch could be the reason. It is more likely that the latch will break if made of metal rather than plastic. Try making sure the latch is lubricated in case it isn't turning or catching. If this does not work, you may have to replace the lock.

If the handle is damaged or broken, it can be difficult to operate. If this happens, it will be necessary to replace it with a new handle that is in line with the design of your sliding patio door.

Feldco can help you restore your patio doors to their former glory, whether they are new or outdated. We have a variety of high-quality patio doors that come in a variety of sizes and styles. Contact us today to find out more about our doors! We proudly serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Faulty Weatherstripping

It's time to upgrade your weather stripping if you see light around closed windows and doors or feel a draft pulling towards the door or window. These strips create an airtight seal, which stops unwanted air, pests and water from entering the home. It also helps keep your conditioned and heated air inside, saving you energy costs all year round.

Depending on the age of your weather stripping, it could have deflated and lost its bouncy, positive seal. This is easy to diagnose by using a dollar bill and putting it through the seal between the top of the door frame and below the jamb of the door where the two overlap. If the dollar bill slides effortlessly between the seal and the door, it's time to replace the weather stripping.

If you only replace the worn-out part of the weather stripping, this may cause problems in the future with the seal. It's far more effective to replace the entire stripping so that you are able to rest that your door is sealed once again.

Follow our DIY guide to weather stripping and install the correct material on your sliding patio door and frame to ensure a secure, lasting seal. This is a great method to save energy costs and also fix your sliding patio door. Don't wait until it's too late. You'll save money and improve the appearance of your home.