• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable property from theft. This system is discreet & does not require additional key fobs to operate.

The device uses existing buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence up to 20 presses long. This will then allow the start-up of your vehicle.

Simple PIN code Change Process

With the rising rate of vehicle theft, a lot of owners are looking to improve their security. There are a myriad of aftermarket security devices available, from tracking systems to immobilisers and alarms. They're not all equally effective at protecting your vehicle. While a tracking system can help you find your vehicle in the event of theft, it can not prevent the crime from occurring in the first in the first place. Immobilisers, Ghost Immobiliser Problems however perform exactly as they claim on the label - they shut down the motor of your car so that it isn't able to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to begin. This can be done using the window, heater or indicator stalk buttons. Additionally option, there is an app for mobile devices that can act as an emergency PIN code override and allows the driver to operate the car without having to use the button sequence. This option is particularly beneficial if you have to hand your car over for valet parking or maintenance, as the immobiliser is activated, but not disabled.

The Ghost Immobiliser problems is an innovative and unique device that works with the buttons on your vehicle rather than as a separate unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used on future vehicles you own. This makes it a much better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a high-tech security system that protects your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be placed in the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it works with all vehicles. It is also resistant against jamming devices which are a typical technique used by thieves to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing technologies, nor can it be detected by traditional diagnostic tools. The autowatch ghost 2 immobiliser ghost immobilisers doesn't produce LED indicators and instead uses the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, customizable disarm sequence. The sequence can be extended by 20 presses for additional security. The iPhone app lets you make one, authorized connection using the pairing code unique to the ghost immobiliser review and the communication between the two is secured.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It is also possible to put it into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to transfer your vehicle to a valet service or for Ghost Immobiliser Problems servicing without the need to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a specific code. The system can be turned on and off through your smartphone's app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is built into the key. This sends a message to the ECU. The car will begin to start if the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It safeguards your car from key cloning, hacking and even key theft. Only by physically towing your car away could a thief steal it and not be able to drive it.

Ghost uses the buttons in your vehicle including the indicator stalk as well as the steering wheel and door panels to generate a unique, changeable PIN code sequence that needs to be entered before you can drive. This is not required to use extra hardware such as keys-fobs, and can last up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.

Ghost is harder to remove than car alarms, which require disarming using the buttons. This makes it a perfect complement to a GPS tracker, which can help locate your car after it has been taken.

Emergency PIN code override

You don't have to look far on social media sites to find stories or even videos of vehicles that were stolen by thieves using the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the car without the original keys.

The Ghost immobiliser was designed to combat this, and give you an additional layer of security in order to prevent your vehicle from being targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, door panel and centre console. This unique PIN is entered along with your original key fob in order to stop the engine from starting. The unique override PIN is on the black card you will receive following installation. It's easy to remember since there are no LED indications.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected using diagnostic software which can identify what type of security systems you have installed. This makes it a fantastic alternative to an alarm.

Unlike other security systems, that rely on a relay located in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

They can also be connected to a separate alarm immobiliser or tracker. This must be specified prior to the installation. They also work with valet and service modes, and are an excellent alternative to a tracking device if you bring your vehicle to the dealer for an electrical problem.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles that are stolen without owners' keys. With easy access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your joy and pride. We have created the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been copied.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, as it does not use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden within your vehicle and is accessible via buttons on your steering wheel, the centre console, and door panels. A unique and changeable PIN code sequence up to 20 digits has to be entered prior to being able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being started or driven away in the event that a PIN code hasn't been entered prior to. If the device is activated and you try to drive off it will display a warning on your dash that will flash regularly for around 300m. If you enter your PIN code at this point, it will disable the anti-hijack device and your car will continue to drive in the normal way. If you don't enter your PIN code at this point, the warning will keep flashing & will require a new PIN code every attempt to start your vehicle.