• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go in and out at their own pace, without having to let them in or out. They can also help prevent your cat flap in upvc door Panel from urinating inside the home.

It is easier to install a cat flap on a Upvc panel than one made of glass however, you'll need some skills and the right tools.

Take a measurement of the door

The installation of a cat flap inside the door isn't easy but if you choose the right type of cat flap be patient and follow the instructions provided it shouldn't be a problem. We will show you how to draw the shape, using an jigsaw for cutting out the area in the door and then finish the job by securing the flap to the door. This will ensure the flap is in place and protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap that you require, take a measurement of your pet's width. This will allow you to select a flap that is big enough for your pet to go into the house and exit without needing to open the door every time.

Once you have the measurements, you can mark out where on the door the template should be placed, usually this is done with an X, but some kits include drawings that show where to drill, if you have one, then attach it to the door and use a pencil to draw around the door. If your door has a sill or moulding at the bottom, make sure that you leave enough space between your cat and these elements.

Next put on your eye protection as well as a dust mask, and using a jigsaw, begin cutting along the line you've drawn in, don't try to push the blade too hard, as this will make it cut faster than you want it to. If you have a square that you have cut, use it to check that you are cutting correctly and also to ensure that the hole is a good rectangle shape, once you are satisfied with this you can begin to remove the remaining door material.

Draw a Line

The cat flap is a great method to let your pet in and out without having to worry about them coming in with guests or leaving unwelcome gifts in the house. It also helps prevent draughts and helps keep your home's temperature steady. Fitting a cat flap to your door might seem difficult for those who haven't attempted it before. Many people call an expert carpenter or joiner to complete the work. While this is certainly an option, it is possible to complete the task yourself if you own the appropriate tools and follow the instructions with care.

It is much easier to do on a wooden door, but it is possible with uPVC. However it is important to be cautious not to scratch the doors as this could invalidate your guarantee. The first step is to measure the door, ensuring that it will be able to accommodate the new cat flap. If you have an ordinary uPVC panel it's easy. However in the case of composite or another type of door, you may require more care.

The next step is to measure the height of your cat's belly. This is the distance from the floor to the underside of the cat's stomach, and you'll need to find a spot near the door cat flap in upvc door panel where this measurement will fall within the range your pet can comfortably go through. Once you have the information you'll have to mark the area with a spirit-level and a pencil, so that you are sure that the opening will fit your cat flap installers.

After you have marked the area, it's time to cut the hole. You will need the jigsaw, and it is essential to take your time to ensure that the cuts are smooth and straight rather than uneven and rough, as this could damage your door. Be sure to wear safety glasses and a dust mask whenever using the jigsaw, as inhaling the sawdust can be dangerous to your health. After you have finished cutting the hole, you'll need sandpaper to smooth the edges so that the cat flap is easily inserted into the hole.

Cut a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be quite difficult. It is tempting to tackle the task yourself, but unless you have a lot of expertise in DIY, it's recommended to hire a professional to do the job for you. A botched job may not only be unsightly but it could also be a security risk and also allow cold air to enter when the cat is outside and hot air to escape inside.

Mark the hole position on the door using the help of a pencil and a spirit level. This will ensure that it is positioned correctly and is flush with the door's other parts. You should make sure you have an sandpaper piece on ready to smooth out any rough edges.

Once the line has been traced, you must cut the hole using the jigsaw. Remember to wear any safety equipment for working with a power tool. If you are concerned about the sound produced by a jigsaw you can buy an electric version that is much quieter and easier to use.

It is best to only remove the material needed to fit the cat flap. A small amount of material will be needed to cover the thickness of the wall of the flap but cutting off more than this can cause problems or cause damage to the door frame.

If the upvc door has a metal panel or frame, it could interfere with the microchip flap. In this scenario you'll need create an over-sized hole to ensure that the metal doesn't come into contact with wall of the flap.

If you are fitting the cat flap onto an upvc door or a double glazed windows with a metal frame, you'll need to talk to a specialist who can provide you with a new pane of glass with the hole for the cat flap already drilled in it. It is much less expensive to do this instead of trying to install the cat flap onto an existing pane of glass that was not designed specifically for the purpose.

Install the Flap

Cat flaps give your pet the freedom to come and go whenever they like and let them relax in the home whenever they'd like. If you've got a uPVC back door with cat flap fitted, it may be difficult to install a cat flap, particularly if you don't own a glass pane that can be cut to accommodate one. Luckily, if you're happy to purchase and install a replacement upvc door panel with cat flap half-glazed uPVC panel, then it's possible to install a cat flap to these doors with cat flap. It's not as easy as just cutting a hole in the door however, and there are some things you'll need to take care of first to make sure it's secure.

A composite, uPVC, or GRP door panel usually has an flimsy plastic outer layer joined to a soft polystyrene core that is insulating. The material is fairly fragile and care must be taken when cutting into it to avoid damaging. This type of door usually comes with a template drawing that you can use as a guide to cut the hole in the door.

Once you have marked the position of the hole in your door, it's time to fit the cat flap. You can pick from a range of designs, from simple push-button models to ones that are microchip-activated and allow only your pet to enter. But, regardless of the type of cat flap you select, it is essential to ensure that your cat can use the flap without becoming trapped outside in bad weather.

A circular fitting is superior than a square, because circles can be cut more securely into the glass. This is because square holes are more likely to crack the glass when they are drilled. This is also a safer choice, as you won't have to drill into the toughened glass which could shatter and harm your pet or family members. This is especially crucial if you have a child or elderly person at home who could be injured by shards of glass.