• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser

ghost immobiliser near me is a wireless security system that guards against key cloning. It connects to the ECU unit through the CAN data network and is quiet and can't be recognized by thieves.

You can only disarm it by pressing the sequence of buttons (like PIN code) you have programmed into your car by using buttons on the steering wheel and center console.

Protects Your Car from Theft

With car theft on the rise and cars being stolen in a matter of seconds it is essential that every car owner think about the additional security measures that are available to them. Immobilisers are among the most effective and proven methods of keeping your vehicle secure. Ghost immobilisers are an excellent option since they are small and hidden in the vehicle's wires. They also do not emit radio frequency signals. This means that they are untraceable and can be installed without affecting your vehicle's CAN bus system.

The ghost immobiliser that we have installed near you can only be deactivated with the pin code we set up at the time of installation. This unique disarm sequence utilizes the existing buttons within your vehicle, such as those on the steering wheel, doors or central console to stop anyone from starting their engine and driving your car away. This makes it impossible for thieves to duplicate your key or ghost Immobiliser 2 use jamming/spoofing devices that can disable the standard immobilisers.

A ghost immobiliser won't just stop your vehicle from being driven but also from being stripped down to make parts. This is a rising issue in the UK due to the growing popularity of these cars. It can happen within one minute. TTW's ghost immobilisers can be easily programmed to guard your vehicle from these types of attacks.

If you have our ghost 2 immobiliser near me installed it will prevent your car being stolen from an auto repair shop or if it is being driven by an employee whilst your vehicle is on the lift at the garage. The ghost vehicle immobiliser can be set to Service/Valet Mode, which will only allow you, the customer to use a specific button combination.

Contact us today if want to know more about our Ghost immobilisers or if you'd like a no-cost estimate. We're here to help you and provide peace of mind knowing that your vehicle will be safe at all time.

No Key Fobs or LED Indications To Give Away Its Location

The non-detectable car immobiliser works with your car's CAN network to guard your vehicle against the latest kind of car theft. In contrast to other CAN immobilisers that are sold by aftermarket, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it uses buttons in the standard factory controls in your vehicle such as the ones on the steering wheel, door panels and the centre console. This means that a secret pin code is created that must be entered before the vehicle starts, making it completely undetectable to thieves.

The CAN-BUS immobiliser developers have added additional security methods to guard the device from being compromised or bypassed. It also has CAN-BUS blocking and an immobiliser cut that is physical, meaning that even if your keys are stolen, the criminal is unable to drive away with your joy and pride.

Installing the CAN-BUS in your vehicle is a simple and easy process that takes only 30 minutes. We will send a member of the team to your location so that they can arrange an appointment and time that suits your needs. Once your vehicle is fitted, you will be given an identification number and security codes for your mobile and the app will make it simple to use and ensure you are always in control of your vehicle's security.

The system can be fitted on most modern vehicles but if you have a specialist or vintage car contact us to see if it is compatible. The supply and installation price of The Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our certified fitters. Please do not hesitate to reach out to our helpful team if you have any queries. We'd love to hear from you.

Easy to Setup and Program

Modern vehicles are often equipped with immobilisers that stop thieves from hot-wiring or taking your vehicle. Contrary to physical deterrents such as lock locks for the steering wheel or wheel clamps, an immobiliser is hidden within your vehicle making it difficult to detect and defeat.

The system works by connecting directly to the CAN data network of your vehicle and stops the vehicle from starting unless you input a unique personalised code. The device is compact and sealed, meaning it can be put in any place in your vehicle without the need for additional wiring. It doesn't also emit a radio frequency signal so it cannot be identified by RF scanning or code grabbing devices used by thieves.

ghost 2 immobiliser review utilizes the buttons on your steering wheel, door panels, and the centre console of your vehicle to generate a customisable (like pin code) disarm sequence which must be entered to start your car. The pin code sequence can be altered depending on the need and is based on four to twenty button presses. You can even place your car in Service/Valet mode, so that it can be operated, but the vehicle will not start and drive. This will keep your car secure when you bring it in for servicing or valet parking and ensure that the mechanic isn't able to access your pin code in order to deactivate your system.

If you will be away from your vehicle for a long time for example, on business or vacation, you can use our app to obtain a temporary pin. You can enter your pin manually while driving the vehicle.

Our CAN bus immobiliser can also be compatible with a remote keyfob and tracker. (Brand dependent) This gives priority to the ghost system. This will give you extra security if your vehicle is stolen or ghost immobiliser 2 if keys are lost.

Contact us today to find out what we can do to protect your vehicle against key-cloning or hacking. We provide our services throughout the UK as well as at our own installation center in Derby.

Service/Valet mode

Modern cars are equipped with sophisticated eco systems with stop/start that require the right inputs for them to work correctly. For instance batteries, voltages, engine temperatures, external temperatures, and which electrical systems are active. Sometimes these can cause problems and can often be difficult to determine if it is Ghost related or not. This is particularly true if the vehicle has recently been cleaned or valet parked. You can utilize the ghost service mode that allows the vehicle to start and drive temporarily without the need for a pin code. This can be useful for when your car is being repaired or parked by an independent garage.

Press the service button five times to enter service mode. The indicator light will flash twice when service mode is selected. You can leave this mode at any time by entering the PIN code. When you exit the service mode, the Ghost immobiliser will return to normal operation.

This is a very discrete system that communicates with the vehicle ECU via the CAN data circuit. It connects directly to the original buttons of the vehicle and does not use radio frequency signals, as do other immobilisers. This makes it virtually impossible for any other device or hacker to break into the system. Even jamming devices that disguise codes from the original key fob won't have any impact on this.

It is a TASSA certified anti-theft system that meets the highest standards of protection. This includes the only marking system that is linked to the international security registry which is required by insurance companies.

The ghost immobiliser is a compact unit that can be easily hidden in the wiring of your vehicle's factory. This makes it almost impossible for thieves. It is a sealed device that is so small that it can be installed in many different areas of the vehicle, including under the dashboard or on the steering wheel.

The system uses the buttons already present within your vehicle (such as the ones on your steering wheel or door panels, or on your centre console) to enable you to create an exclusive and customizable disarm sequence up to 20 presses long that must be entered before your vehicle will start. Anyone with your pin code can use it, so you, your family members, your colleagues or friends can use it.