• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to improve the security of your home, without compromising the aesthetics, choose sash lock door handles. They are used in conjunction with a mortice latch or sash lock, and can be combined with a night latch to provide additional locking for doors inside.

These handles consist of a lever/handle mounted on the backplate. They are usually used with a three or five lever mortice lock. They can be combined with tubes latches.

Lever Lock Handles

There are many different types of lever door handles to complement any decor. The rustic lever latches go well with a farmhouse or ranch-style decoration and are also very popular in modern homes. Classic lever handles are either round or spherical, and easy to hold. They are affordable, simple, and suitable for any home design. Choose polished or satin nickel chrome handles for an elegant style. These finishes are easy to clean and durable. Other options include antique bronze as well as polished brass. Some handles have designs, like amber worm-eyes or long-horned Cyrstals. Some feature the shape of a pin or star molded into the top of the lever.

To change the lever lock door handles, you require the appropriate screwdriver or tool to disassemble them. You may need an awl, or a nail based on the model and style. Some lever handles have a narrow notch or hole on one side of the base that can be used to open it.

Once you have the correct tool Follow the instructions of the manufacturer to remove the handles you have already installed. You'll need to determine the spindle size of the new lever handle. Doors that have been morticed (cut into the door) to accommodate latches from the past or locks and must be fitted to a certain spindle size. Most lever handle manufacturers offer the same standard door spindle size for handle.

If you want to replace a sash lock door handle, you must remove the old handle and disconnect the tubular latch bolt from the strike plate that is on the door frame. The latch bolt will need to be inserted through an opening in the frame of the door and connected to the strike plate.

It is important to remember that when installing the lever handle for the first time all handles that are compliant with the ADA (Americans with Disabilities Act), are designed to be operated by hand. The user must not be required to grip their hands tightly or turn their wrists. To ensure that they comply with ADA standards for compliance the lever door handle cannot be operated by using fingers and thumbs or even the entire hand.

Sash Lock Handles

The primary purpose of door handles with sash locks is to pull the moving sashes together tightly to create a seal. This helps to maintain the temperature of the house and stops drafts. They are also ideal for doors that do not require the security of keys for locking systems.

Mortice sashlocks are replacing sash cords locks that incorporate the latch and deadbolt into one case. They are fitted into the door's material. They work in conjunction with doors with handles, and there are many choices to suit your home.

The lever locks are operated by a lever that has a hole cut in the backplate below. This permits a key to be inserted into the mortice sash to turn it. It is most often used for doors that don't lock like living rooms and dining areas, but can be paired with a tubular latch on an internal door that is more secure.

These are designed to keep the sash in place at several points, and feature a hook that fits inside the keeper. They come in a variety of styles and designs that fit different window types such as sliding or hinged casement windows. Some are made of cast aluminum while others are made of brass or wrought iron. They are available in a variety of finishes that match other elements of your door furniture, for instance, escutcheons that protect the keyhole.

3 lever sash locks are suitable for internal doors but not for external doors, because they lack the security level required by insurance companies. They also are less vulnerable to forced entry than their five lever counterparts, which makes them more susceptible to being harmed.

A door sash with five levers is the best option for doors that are external. It provides higher levels of resistance to forced entry, and is more difficult to bypass or pick. The locks are upgraded in design that's been tested and certified to meet the strictest security, fire and disability regulations.

To replace a handle on a sash-lock take the old fastener from both ends by taking out the screws. Make sure you have a screwdriver on hand and carefully separating the components to ensure that there is no damage. Mark with a pencil the location of the screw holes so that you can place the new fastener properly when it comes time to install. Remove any dust or paint particles, and then screw in the new fastener. It is important to test the handle to make sure it is working correctly and makes a an encapsulated seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which is located inside a door, and is operated by turning the handle. It is designed to close a door but it does not secure it like mortices. They are most commonly used for doors with internal doors, in which locking is not needed. They can be fitted either with knob or lever handles.

There are many sizes of tubular latches that are available. They range from the cheapest to high-end architectural quality. The size of the door depends on its purpose and whether it has an lock. For example, a bathroom door may require a thumbturn and release mechanism in case of emergency, so you'll require a lockable latch.

The backset of your door will also affect the latch you choose. This is the distance between the edge of your door and the centre of the hole that is used for the door handle rose/knob, and you must choose a latch with a matching backset measurement. This will ensure that the door knobs or handles operate the latch with ease.

If you are installing a knob or lever with a spring or without spring, it's crucial to select an extremely robust tubular latch. It should come with an elongated follower that is secondary double glazing for sash windows-sprung. This will ensure a smooth operation for the latch and stop it from becoming slow and inactive after regular use.

The next step is to install the latch on the door. First, make sure that the latch is at a level with the top of the door frame or casing by making a mark on the location of the latch plate, then drilling holes for it. Using a countersink drill bit will help to create the proper recess for it to rest comfortably in.

Once the latch is set after which you can attach it to the door. Before installing your door handles or locks it is essential to ensure that the latch is functioning properly. To check this simply open and close the door a few times. If the door isn't working properly try lubricating your door using WD40. Then re-try it. If you continue to encounter problems, it may be necessary to speak with a locksmith or professional installer.

Keyhole Handles

Keyhole handles are fitted with a tubular latch fitted to the door to open and close it. The handle engages the latch when pushed down and releases it when pulled up. These handles are usually used on interior doors like those found in dining rooms and living rooms. However, they can be fitted to front door if paired with the nightlatch.

Door knobs are more modern handles that incorporate spring levers/handles with a square or round fixing stem and a thumb-turn or escutcheon. They are available in a wide range of styles and finishes to match different doors in the home. They can be utilized with Euro cylinder locks or multipoint locking systems to add extra security to your door. This is achieved through several points of locking along the door height. It is also necessary to have door handles that are compatible with the correct lock centre dimension to fit the barrel of the cylinder.

Keyhole escutcheons serve as an enclosure for the door's existing key hole to conceal it from view and give a more stylish finish to the handle. They can be purchased as a pop-on or screw-on design and come in a variety of designs to match your door handle. A recessed escutcheon, that is attached to the outside of the door to hide the keyhole further and give it a modern look, is also used.

The majority of the handles described above are designed to be used with either a mortice lock or double glazed sash windows wood lock mechanism. However certain handles are compatible with Euro cylinder locks too. They are designed for uPVC doors and require door handles with a Euro cutout for a cylinder and the appropriate screw holes inside the backplate to accommodate the euro cylinder. These handles may also require an escutcheon for Euro-cylinders, or a standard escutcheon depending on the application.

It is essential to understand the differences between a sash or mortice lock and a tubular latch as well as the compatibility requirements for each. You'll need to take into account the door thickness and the door hinges as well as the frame reinforcements. the size of the backplate to the handle, the lock's centre dimensions and the screw centers on the cylinder.