• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to increase the security of your home without sacrificing aesthetics, go for sash lock door handles. They can be used with a mortice latch or box sash windows lock. They can be paired with a night latch to add security for doors that are internal.

These handles are made up of two levers mounted on a backplate. They are used with three- or five-lever mortice locks. They can also be combined with an elongated latch.

Lever Lock Handles

There are many kinds of lever handles that can be matched to any decor. Rustic lever locks are popular in both farmhouse-style and modern homes. Classic lever handles are round or spherical, and are simple to grasp. They are affordable and simple, and can be used in any style of decor. For a stylish look, opt for polished chrome or a satin nickel handle. These finishes are sturdy and easy to clean. Antique bronze and polished brass are also alternatives. Some handles have designs, such as amber worm-eyes or long-horned Cyrstals. Some levers feature a pin, star or some other shape that is molded into the bottom.

To replace your lever lock door handles first ensure you have the correct screwdriver or tool to remove them. Depending on the model and design you may have to employ an awl, or nail to remove the lever handle. Some lever handles come with an oblique notch or hole at the bottom of the handle that can be used to pull them open.

Once you have the correct tool, follow the manufacturer's instructions to remove your existing handles. Examine the spindle of your new lever. Doors that have been morticed (cut into the door) for previous latches or locks, and must be adapted to a particular spindle size. The majority of lever handle manufacturers use the standard spindle for door handles.

If you wish to replace a sash lock door handle, take off the handle you have previously installed and disconnect the tubular latch bolt from the strike plate that is on the door frame. The latch bolt will need to be inserted into an opening in the door's frame and connected to the strike plate.

It is essential to keep in mind that when you install new lever handles, all handles that comply with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user shouldn't be required to grip their hands tightly or twist their wrist. To ensure that they comply with ADA standards of compliance, the lever door handle cannot be operated with fingers and thumbs or the entire hand.

Sash Lock Handles

The primary function of locks for sash is to seal the door by pulling the moving sashes tightly together. This prevents drafts from entering the room and helps to maintain interior home temperatures, saving energy costs throughout the year. These locks are great for doors that do not call for a keyed lock.

Mortice sashlocks are sash locks that incorporate deadbolt and latch in one case. They are inserted into the door's material. They are often used in conjunction with door handles and are available in a range of choices.

The lever handles for locking is operated by a lever with an opening cut into the backplate below. This permits a key to be that is inserted into the mortice frame to operate it. It's most commonly used for non-locking doors such as living rooms and dining areas, but can be paired with a tubular latch for the inside of a door to make it more secure.

These are designed to keep the sash in place at several points, and include a hook that fits inside the keeper. They're available in different styles and designs that can be fitted into various window types like sliding or hinged casement windows. Some are made from cast aluminium, whereas others are made are made from brass or even iron wrought. They're available in a variety of finishes to match other elements of your door furniture, for instance, escutcheons that guard the keyhole.

The 3 lever sash locks only suitable for use on doors with internal doors. They do not provide the security level required by insurance companies. They are also less vulnerable to forced entry than their five lever counterparts, making them more vulnerable to attack.

A door sash lock with five levers is a better choice for doors that are outside because it provides higher levels of resistance to forced entry and is more difficult to bypass or pick. These locks feature an upgraded design that has been tested and certified to meet stringent fire, disability and building requirements.

The first step in replacing the handle on a sash lock is to remove the old fastener by taking the screws from both ends. Make sure you have a screwdriver on hand and carefully separating the pieces to avoid damage. Mark with a pencil where the screw holes are to ensure that you line up the new fastener properly when you are putting it on. Clean any paint or dust particles, and then screw in the new fastener. It is essential to test the handle to make sure it is working correctly and makes a an effective seal.

Tubular Latch Handles

The tubular latch is an internal latch that is operated by turning the handle. It is designed to latch the door shut however it does not lock the door as mortice locks would. These are most often employed on doors with internal doors where there is no need for locking. They can be fitted with knob or lever handles.

Tubular latches are available in different sizes. They range from the cheapest to the highest quality architectural quality. The size you choose depends on the purpose of the door and if you require a lock function. If you require the thumbturn release mechanism in an emergency, a lockable latch is needed.

Choosing the right latch also is dependent on the backset measurement of your door. This is the distance between the edge of your door and the middle of the hole for the door handle rose/knob and you will need to choose a latch that has an identical backset measurement. This will ensure that the door knobs or handles operate the latch smoothly.

If you are installing a lever or knob with a spring, or without spring, it's crucial to select an extremely robust tubular latch. It should have an elongated follower that is double glazed sash windows wood-sprung. This will ensure a smooth and consistent latch action and stop it from becoming slow or unresponsive after regular use.

The next step is to install the latch on the door. First, make sure the latch is level with the top of the door frame or casing by taking measurements and marking the position of the latch plate then drilling holes for it. Countersink drill bits can aid in creating the proper recess that allows it to fit comfortably.

After the latch has been installed, you can install it into the door. Before installing your door handles or locks it is crucial to make sure that the latch is working properly. To check, open and close the door a few times. If it is not functioning correctly, try lubricating the door using WD40 and then attempting it again. If you are still experiencing problems, it might be necessary to contact a professional installer or locksmith.

Keyhole Handles

Keyhole handles are fitted with a tubular latch that is installed in the door. The latch is used to open and shut the door. The handle is able to engage the latch when it is pushed down, and releases it when pulled up. The handles are typically used on doors in the interior like those found in dining rooms and living rooms. However they can also be affixed to front doors if they are coupled with the nightlatch.

Door knobs are more contemporary handles that include a sprung lever/handle with a square or round fixing stem, and a matching thumb-turn or escutcheon. They come in a wide range of styles and finishes to match different doors in the home. They can be used with Euro cylinder locks or multipoint locking systems that provide an additional layer of security to the door. This is achieved through several points of locking along the door's height. It is also necessary to have compatible door handles with the right lock centre dimensions to fit the barrel of the cylinder.

Keyhole escutcheons cover the existing keyhole in the door to hide it and give the handle a more stylish appearance. They come in both the screw or pop on design and are available in a variety of finishes that match the door handle. Alternatively, a recessed escutcheon can be fitted to the edge of the door to conceal the keyhole and create a more modern appearance.

Most of the handles discussed above are designed to be used with either a mortice lock or sash lock mechanism. However, some of them are compatible with Euro Cylinder locks too. They are designed for uPVC doors and require door handles that have a Euro cutout for the cylinder and appropriate screw holes within the backplate to accommodate the euro cylinder. These handles will also require an Euro Cylinder escutcheon, or a standard escutcheon, based on the application.

Whether you choose a mortice lock or a sash windows upvc lock, or a tubular latch for your door, you need to be aware of the different characteristics of each and the requirements they have to be compatible with the other components of your uPVC door system. You will need to take into consideration the door thickness, the door hinges, the frame reinforcements, the size of the backplate for the handle, the lock's central dimensions and the screw centres on the cylinder.