• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the window repairs panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fit. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. You'll first need to close the window and then perform an initial fitting. The corners of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window repair near me leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with the breeze. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier when you have a person to help you hold the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by various factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes a gap to form where the sash meets the frame. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it might be necessary to have them realigned or replaced. The interlock, which is located on the hinge of the window and can be misaligned. Again, it's possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window repairs sill. They can help keep cold air out and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.