• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

An in-wall fireplace gives an elegant and polished appearance without the expense of a mantle. It is one of the easiest electric fireplaces.

There are some things to think about before purchasing an in-wall fireplace. To get the most value from your investment, adhere to these tips for a successful purchase:.

Height

It might seem like an easy question however, determining the height of your fireplace is one of the most important decisions you'll make. This is because the height of your fireplace can affect everything from how well it fits in a room to how visible it is. The fireplace might appear strange if it is raised too high. It can also take away from its aesthetics. On the other the other hand biofireplace (Http://gruenestadt.ru/bitrix/rk.php?Goto=https://www.fireplacesandstove.com) having your fireplace too low could cause it to be lost in the wall space.

Luckily electric fireplaces are able enough to be installed at various heights. For instance, most people choose to mount their fireplaces at eye level from a sitting position. This usually requires a height of 40-42 inches from the floor to the bottom of the fireplace. Others mount their fireplaces underneath their TVs, which can be visually appealing.

The exact size of your fireplace will be determined by a few things, including the size of the room and the length of the wall you'd like to put it. The larger the space is, the bigger it will be. This could mean that you're able to fit a larger fireplace in it. The length of a wall is also important since a wall that is larger will support a larger fireplace.

How you intend to use your fireplace is another important aspect. If you are planning to use it solely to decorate your home, it is recommended to choose a lower height. If you intend to use it to heat your house, you will need to ensure that the fireplace is strong and tall enough to meet safety standards.

It is essential to choose the appropriate size for your fireplace to ensure that it is in line with your decor and be simple to clean or fill. If you're not sure of the size to choose it is always a good idea to seek out an experienced fireplace installer for assistance. They can advise on the best height for your fireplace according to their experience and the design of your home's layout.

Depth

It is crucial to be aware of the depth of a fireplace, especially if you are planning to place it in an recessed position. If you are going to cut your wall, make sure that you have enough space to accommodate the interior design of your fireplace (the smoke shelf that is above the fireplace box, the flue which runs through the roof, and the fireplace itself). You should also consider the space you have available for the surround and whether you'd like a fireplace mantle.

Many of the more recent electric fireplaces have the depth of being almost concealed, giving them an "integrated" appearance. The Panorama Bi-Deep series is a fantastic example of this type of electric fireplace that is wall-mounted. This model features a 5.8-inch depth that lets the viewer see the flames and the ember bed, not the frame of the fireplace. It is also equipped with a range of media options, including natural-looking driftwood logs that look like driftwood white pebbles, crystals made of clear glass that reflect the flames and enhance the ember bed.

Gas wall-mounted fireplaces wooden can be found in both deep and shallow models. When deciding on the depth of your fireplace it is important to keep in mind that these fireplaces function as a source of heat that is supplementary and should be properly vented by a knowledgeable professional. The length of the vent pipe, the dimensions of the flue and the distance between the stove and the vent are all aspects that should be considered when determining the depth of a fireplace made of gas.

Whether you choose a surface mount or one-piece installation, it's essential to follow all of the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in the majority of instances. It is also an excellent idea to have a second person in the house when installing a fireplace.

The addition of a fireplace in the wall place to your home is a great option to enhance it and add ambiance. It also can help reduce your heating costs. It is also a great alternative for biofireplace those who are unable to install a traditional fire place in your home due to space constraints or because of the location of a chimney.

Surface Mount

Surface mounts are an excellent alternative if you don't want to or aren't able to cut into the wall to mount an electric fireplace. They also give it a sleek built-in appearance. Certain models, such as the Allusion line of electric fireplaces, can be mounted partially recessed into a wall, without compromising heat output.

To start the installation process, you must determine the area where you want your fireplace to be located and make a mark using a pencil on the wall where the bracket will be erected. Use a stud-finder for locating the studs, and place the brackets in front of at least one stud for stability. If a stud isn't within reach or won't work for your fireplace, make use of drywall anchors to help support the mounting bracket.

After you've marked the position of the brackets for mounting and drilled them, screw them into the wall, biofireplace making sure they're aligned with the studs. If you can, secure each bracket to a stud to ensure strength and stability, however you can also use anchors made of plastic in the event of need. After the mounting brackets are in place, lift your fireplace and hang it on the wall bracket. Once the fireplace is installed, make sure it is level.

Before continuing with the installation, connect your fireplace and check whether all features are operating correctly. Turn on the fire, and then ignite the flames, play around with the heat, ember bed lights, etc. Once you are happy with the results, it's time to put in the floating mantel.

Depending on the model of your fireplace It is possible to connect the wire connection to the appliance connector on the lower part of the mantel or if it has slots or hooks, connect them to the slots on the brackets for mounting. After you've completed this step make sure to consult the user manual to learn how to remove the glass front panel from the opening and replace it.

Once you've removed the front panel of your fireplace and placed it in its opening, follow your manual's specifications to finish the install by replacing the glass front and adjusting the height if necessary. If your fireplace includes ember bed media, spread it over the top grate for a more natural look. Then secure it with the included screws.

Plug-In

These electric fireplaces do not require chimneys or vents as do traditional wood-burning fireplaces. Connected to a standard outlet, they can provide additional heating for rooms up to 400 square feet. You can also alter the ambience with a variety of flame and heat settings. Certain models have LED lighting effects that accentuate the ember bed and ethanol fire. Some models have an overhanging grille that conceals the manual controls, however they it can be opened easily to reveal buttons.

Electric fireplaces that plug in can be mounted directly on walls or recessed into the wall for a built-in appearance. They are generally more straightforward to install than mantel fireplaces. Some have pedestal bases to allow you to set the fireplace on a flat surface, such as a dresser or buffet. There is a remote control, mounting hardware and a log set. electric firesuite fireplaces can have both flame and heat options, which can be turned off to create a year-round ambience.

Some models have adjustable privacy glass that you can change instantly from fully transparent to partially. This makes these models popular for walls that divide common spaces for entertainment, such as living and dining spaces. They can be even used in bedrooms where the addition of a fireplace can be a cost-effective method to reduce the chill in a room without sacrificing privacy.

While plug-in electric wooden fireplaces don't require a hardwire like built-in versions they must be positioned on the wall that is at least stud-free and capable of supporting the weight of the fireplace. Certain models come with a kit which includes an already wired cord and special bracket to make the installation process simpler. This kit can be used for either drywall installation or concrete installation.

When deciding on a place for your wall-mounted electric fireplace, ensure it's near an electrical outlet. Electric fire places that plug in can be connected to outlets that are on the same circuit as the electric fireplace or into a separate outlet. It is recommended to use an exclusive circuit to ensure that nothing else in the home will run on the same voltage and potentially trip your breakers.